LED Lighting T 5 Integrated Light RoHS TUV ETL t5 Bracket Lamp
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 100000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
8 Specification:
Material | Aluminium + PC cover |
Body size | 600mm |
Light quantity | SMD2835/96Pcs |
Power Installation | Power external in the tube |
Work voltage | AC100-240V |
Power consumption | 10w |
Power factor | >0.92 |
Work temperature | -20°C~+50°C |
beam angle | 120° |
Color rendering | >80ra |
Color temperature | 2700-7200k |
Luminous flux | 950Lm |
Light-to-Electric conversion yield | 95% |
Life span | 50000hrs |
Feature:
1.Magnetic&electronic ballast compatible
2.No need to remove starter or ballast.
3.No professional electrician needed
4.Easy for installation
5.No labor cost, maintenance free
6. instant start.
7. No UV, NO mecury, healthy for human body
8.Power consumption:24w
9.Certificate:CE,RoHS,FCC,PSE,TUV,UL
10.Low power consumption
11.3 years warranty
10.No fluorescent flickering
11.No RF interference, no buzzing noise.
12.No hazard of mercury or lead entering the environment
13.Easy in stallation
14.No dangerous of glass broken
Description:
1.Living room, bedroom,kitchen, washroom;
2.School, university, hospital,hotel;
3.Conference,meeting room, show room,showcase;
4.Commercial complexes;
5.Factory,plant,warehouse,office;
6.Supermarket,department store.
Images:
FAQ:
What certificates do you have for your products?
ISO
- Q:How does the T8LED light tube replace the fluorescent lamp tube
- Tube at both ends a firewire, on the other side is zero, the two feet per head are connected together, by one or two can be, if with neon bulb starter, starter can be twisted off, then remove ballast two joint together can change LED bulb.
- Q:How to connect the power supply when the LED lamp is energized? The search is to get a wire directly from two ends? Do you need to be able to distinguish positive and negative?
- Are you asking for 220V power? If you don't have to be a plus or minus, because the ac is not a plus or minus, you can just plug it in. Hope can help you!
- Q:What is the cause of the lights after the led fluorescent lights are turned off
- The third one is the most common problem of power leakage which is the small current of the power supply or the uncontrollable control
- Q:A 30-watt light bulb can be used for a change of LED lamp
- The fluorescent lamp bracket some trouble, generally in the power of the led lamp is generally in 18 w 9 w, 600, 36 w in 18 w, 1200 long, 30 w words should be in 12 or 15 w, do you want to make sure the tube length.
- Q:How does the traditional fluorescent tube stand install led lamp tube reforming method
- Replace the lamp and rectifier with LED and matching. Traditional fluorescent lamp or low pressure mercury lamp, is using low pressure mercury vapor release ultraviolet ray after electricity, which makes the principle of phosphor emit visible light, so it belongs to low pressure arc discharge light source.
- Q:Why does the led fluorescent tube have water vapour in it? What causes it?
- The starter down. When the regenerator was knocked down, my home was my own scissors and cut off the ends of the two ends of the regenerator. Then attach the severed head to the insulation tape. search Put the base back to the original. The head of the LED fluorescent tube will be plugged into the base current
- Q:What is the difference between the daylight lamp tube used in fishing steel and the normal lighting tube
- Ordinary bulbs are fluorescent lights, which are not the same as leds. The fluorescent lamp is the electric power of the ballast machine that produces the high pressure instantly, excited the two feet of the inside of the lamp tube to discharge, then stimulates the phosphor powder to shine. This process produces high heat. LED luminescence is an electron transfer within a semiconductor that produces light that does not produce heat. That's why leds are called cold light sources.
- Q:What about the normal daylight tubes replaced with LED tubes, ballast and flashers?
- The rectifier and the regenerator can be removed, the specific installation method should be changed according to the electric way of the LED lamp tube
- Q:Can fluorescent tube T5 and LED T5 be connected in tandem?
- Where did you see the electrical series, the series is not going to work. You're talking about parallel, too.
- Q:In several production workshops of my unit, we will replace a batch of philips T5 fluorescent fluorescent lamps with LED fluorescent lamps. However, it took more than two years to get rid of the old lamp, and it was neither green nor economical, so consult the high man.
- The same way But at the moment there appears to be no systematic recycling system for fluorescent tubes
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
LED Lighting T 5 Integrated Light RoHS TUV ETL t5 Bracket Lamp
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 100000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products