KS202DS fully hydraulic single drum vibratory roller
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Note1: Padfoot is optional to all the fully-hydraulic single drum vibration rollers with double drives.
● A Professional and leading manufacturer for hydraulic road rollers, many years experience for road construction machineries.
● The factory covers an area of 140,000 square meters with more than 600 employees. Annual production capacity is 5000 sets of hydraulic road rollers.
● The company integrates R&D, production, sales and service.
● Production complies with IS09001 quality management system.
● First-class configuration can meet various request from customers.
● Products have been exported to more than 50 countries in the world.
Due to continual improvement of technologies, the technical specifications are subject to change without prior notice.
Main Features
Main Features
SAUER driving and vibration system brings the stability and reliability.
Imported vibration bearing, “three prevention” electric plugs are of good quality
Fully hydraulic Transmission and Fully electrical-hydraulic control facilitates the operation and enhances the automation.
The walking is driven by hydraulic motor, and the monolever-controlling and CVT facilitates the operation.
Double frequency and double amplitude vibration makes sure the excellent effectiveness of compaction.
Fully-hydraulic articulated steering
Maintenance-free battery cell facilitates the maintenance.
Automatic power shutting off for braking can make sure the safety and reliability.
The stream line configuration and upturning engine housing are complined with people's aesthetic standard.
项目 Item | 单位Unit | 参数Specifications |
工作质量 Operating weight | kg | 20200 |
静线载荷 Static linear load | N/cm | 539 |
振幅 Amplitude | mm | 1.95/0.91 |
振动频率 Vibration frequency | Hz | 28/32 |
激振力 Centrifugal force | kN | 395/272 |
速度范围 Speed range | km/h | 0-10 |
爬坡能力 Gradeability | % | 40 |
转弯半径 Turning radius | mm | 6250 |
振动轮宽度 Drum width | mm | 2110 |
振动轮直径 Drum diameter | mm | 1550 |
最小离地间隙 Min. ground clearance | mm | 486 |
发动机型号 Engine model | - | DEUTZ |
功率 Rated power | kW | 129 |
燃油箱容量 Fuel tank capacity | L | 280 |
转向角 Steering angle | - | ±35° |
摇摆角 Swing angle | - | ±12° |
外型尺寸(长X宽X高) Overall dimensions (L×W×H) | mm | 6370x2310x3200 |
- Q:What are the tonnage of the rubber tyred rollers?
- 25 tons, 26 tons, 30 tons are common, in addition, the full hydraulic 26 tons and mechanical 30 tons of compaction effect is the same
- Q:The road from top to bottom, followed by 500 thick gravel, 300 thick cement stabilized macadam, 100 thick asphalt. While the gravel bottom elevation and elevation is very close to the top of the rain water, how to prevent the roller crushing rain water pipes?
- I am not a professional, but I have seen, they are the bottom of the shop, and then pour concrete pouring, a pipe down, and so on when the concrete strength, and then pour asphalt, and then over-voltage road machine
- Q:What is the difference between 18t roller and vibratory roller? What's their respective function?
- Your problem is not comprehensive. If it is a vibratory roller, it will be divided into double and single steel wheels. Single steel wheels are used in earthwork and Macadam foundations. Double steel wheels are used on asphalt
- Q:Roller cylinder is cylindrical, the width of the drum is 1.5 meters, the cross sectional diameter is 1.2 meters, if every minute to 10 laps, then 1 when the pressure of the road surface number of square meters?
- Solution: the bottom perimeter is 3.14 * 1.2=3.768 (meters)The lateral area of the cylinder is 3.768 * 1.5=5.652 (square meters)10 turns per minute, you can find one minute, the area of the road is 5.652 * 10=56.52 (square meters)1 hours =60 minutes56.52 x 60=3391.2 (square meter)Answer: 1 hours, 3391.2 square meters of road surface pressure
- Q:How to maintain the roller?
- One day1. roller check whether there is no oil, water and gas leakage and overheating parts;2. roller check diesel engine oil, coolant and hydraulic oil level;3. roller to check tyre pressure and damage;4. roller check instrument and light;5. press grease with each hinge joint.Two, every 50 hours1. check the front and rear drive shaft bolts;2. check the transmission oil level;3. check and adjust the foot brake and hand brake, brake booster oil;4. check the throttle control and shift control system;
- Q:How often does the roller change the engine oil? Is there a master pointing at one or two?
- Your roller oil change cycle is usually 250 hours to replace!! The 250 hours here are a cumulative amount of work hours per day!! At the same time for changing the oil filter!!! If the environment is too bad (sand dust serious) can be replaced in advance. If you work less than 250 hours a year, suggest changing it once a year!! But it's a job of less than 250 hours a year, so I suggest you sell the roller!! Ha-ha！！ I hope I can help you!!
- Q:Roller roller do large objective
- Only two can press the road more tightly, so as to achieve a certain degree of compaction, width is to work efficiency, the greater the area of contact, the pressure will rise faster.
- Q:What is the action of a vibrating gas? What is the principle of action and what is the working principle?.
- Three factors of magnitude of exciting force:The weight of a spinning object;The distance that the center of gravity deviates from the center of rotation (radius of rotation);Speed of rotation.
- Q:Cement layer construction, do not roller compaction, OK?
- Second, if the road cement stabilized base, it must be roller compaction, otherwise the water stability layer can not reach the required density and intensity.
- Q:Now the police, when the general work will be put out, began to work this afternoon has been long bright
- This is the failure lights, according to the situation you say there should be several possibilities: oil filter clogging, filter clogging, pressure sensor failure or blockage in oil, oil pump does not turn you find instructions have introduced one by one investigation
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
KS202DS fully hydraulic single drum vibratory roller
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
