1. compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 1000-1500kgs under the force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh) 0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
3. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
4. The separator can be adjusted very easily.
5. The multi-class seals are adopted to keep the grinding equipment tightly closed.
The purpose of the machine is to grind materials in the fields of metallurgy, construction, chemical industry, mining, highway, water resources and hydropower industry.
The materials should be non-flammable and non-explosive. Examples of the materials are:quartz, feldspar, calcite, limestone, talcum, ceramics, marble, granite, dolomite, bauxite, iron ore, barytes, bentonite, gangue coal and so on.
The materials should have the hardness less than 9.3 in Moh's scale and humidity less than 6percent. The granularity of the end products can be changed from 0.613mm to 0.033mm.
- Q:What are the supporting facilities for the concrete mixing stations?
- Concrete mixing equipment, concrete transport equipment, laboratory equipment, forklift, overpound equipment, ground pump, car pump etc.
- Q:Cement warehouse introduction, storage reserves?
- There's nothing to come, but warm and young About 200 tons
- Q:How much concrete is produced per hour by HZS180 concrete mixer?
- HZS180 concrete production line equipment production line equipment per hour theory produces 180 cubic concrete. It depends on the equipment situation. Henan zheng a heavy industrial concrete mixing plant equipment factory
- Q:What kind of sand is needed for a concrete mixer
- Give you a website to see. Specializing in concrete mixing stations. Hope that useful.
- Q:What are the ingredients for the concrete mixing stations?
- The main ingredients of admixtures are: the mother fluid, the composition of the air and the composition of the mixture, and the water. The concrete formulations are determined according to the different materials of concrete, which is usually the mother solution and the adjustment time. The parent fluid is itself well adapted and does not require a lot of material.
- Q:What type of concrete mixer is needed for each hour of concrete 90 cubic meters?
- The mixing host of HZS90 concrete mixing station can be matched with the JS double sleeper shaft reinforced concrete mixer or imported concrete mixer host. The host is equipped with dust collecting machine, which has automatic dust collecting, dehumidification, exhaust, and the ability to recycle the collected dust to the main engine. The dust is excellent. The top of the cement bin is equipped with cylinder dust collecting machine, which is efficient and low noise. The main frame is packed in color plate, neat, beautiful and dustproof, with good view. Double post integrated installation, convenient operation and economical site. HZS90 concrete mixing station, the theoretical productivity of the device is 90 cubic meters per hour. The mixing host is the JS1500 type strong mixer, the nominal capacity is 1500L. The toppings are 1600L, the maximum productivity of the screw conveyor is 80t/h, and the maximum particle diameter is 80mm. Cement weighing accuracy and range (0 ~ 900) plus or minus 1% kg, admixtures weighing accuracy and range (0 ~ 50) plus or minus 1% kg, aggregate weighing range and precision of 0 x 5000 plus or minus 2%, HZS90 commodity concrete mixing station - unloading height is 3.8 meters, can be appropriately increase or decrease in height, in order to satisfy the demands of discharge conveyor. The standard reference weight is 97 x 103kg, which needs strong base to stabilize the mixing station
- Q:Classification of concrete mixing stations
- Commercial concrete mixing station: single/double HZS90 concrete mixing station, single/double hzss120 concrete mixing station, single/double hzss240 concrete mixing station, single/double hzss240 concrete mixing station. Engineering concrete mixing station: HZS75 concrete mixing station, HZS60 concrete mixing station, HZS50 concrete mixing station, HZS35 concrete mixing station, HZS25 concrete mixing station. Mobile concrete mixer station
- Q:The main components of a mixing station
- The conveying system of materials is made up of three parts. Aggregate conveying; There are two ways of conveyance and belt conveyance. The advantage of hopper promotion is that the area is small and the structure is simple. The advantage of belt transport is that the transport is large, efficient and low. The belt conveyor mainly applies to the mixing stations that have aggregate storage, thereby increasing the productivity of the mixing stations. Powder conveying; The powder used in concrete is mainly cement, fly ash and mineral powder. The most commonly used powder conveyors are conveyors of screw conveyors, and the large mixing buildings are carried by pneumatic conveyer and scraper. The advantages of screw transport are simple structure, low cost and reliable use. Liquid transport mainly refers to water and liquid admixtures, which are delivered separately by water pumps
- Q:What chemical materials are used in the concrete mixing station?
- Start with the glue: cement, coal ash, mineral powder, and various expansions! Sand: natural sand, mineral sand, fine sand; Stone: 5-10, 5-20 water reducer! And tap water
- Q:Does the concrete mixing station name have the name of the businessman concrete
- Yes, concrete means artificial stone, which can be understood as the simple writing of concrete, which means concrete for commercial concrete. This is the name of the blender
Our company has already formed a complete production chain. We take mining crushers and powder mills as our main products. We take circular vibrating screens and vibrating feeders as our supplementary products. The normal machinery technology of our grinding mill series and crusher series is in the basic level. To some extent, our technology has reached the internationally advanced level. In recent years, based on absorbing the advanced experience, we have optimized the design for our machinery by using the advanced technology continuously.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range