China Supplier Supply Calcined Bauxite With Best Grade

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
0 m.t.
Supply Capability:
25000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

China Supplier Supply Calcined Bauxite With Best Grade

 

Introduction:

 

Bauxite is actually refers to the industry, in sanshui diaspore, soft diaspore monohydrate or hard diaspore monohydrate as the main mineral composition of ore.Its application field has two aspects of metal and nonmetal.
Bauxite is the best raw materials, production of aluminum is the main field of application of the dosage of more than 90% of the total world bauxite production.Non-metallic USES mainly bauxite as refractory materials, grinding materials, chemical products and high alumina cement raw material.Bauxite in non-metallic proportion is small, the amount of but it is very extensive use.For example: chemical aspects such as sulfate, aluminium trihydrate and products can be used in paper making, water purification, ceramic, and petroleum refining;Activated alumina in the chemical, oil refining, pharmaceutical industry as a catalyst, catalyst carrier and decoloring, dewatering, degassing, acid, drying and other physical adsorbent;R - Al2O3 production of aluminium chloride for dyes, rubber, pharmaceutical, oil and other organic synthesis application;Glass of 3% ~ 5% Al2O3 can improve the melting point, viscosity and strength;Grinding material advanced grinding, polishing powder is the main raw material;Refractory materials is indispensable furnace building materials industrial department.

 

Applications:

 

1) Abrasive: Producing ceramic grinning wheel, grinding stone, grinning block, sanding paper, abrasive sand cloth, sand belt, polish wax, abrasive paste, coating etc.

 

 

2) Refractory material: Mainly used for abrasion and high temperature resistant in steel metallurgy, various industrial stoves, electric furnace etc.

 

 

3) Sandblasting abrasive: Mainly used for various material work pieces to decontaminate, derusting, prevent corrosion, remove oxide skin, glass sandblasting etc.

 

 

4) Abrasion resistance ground: Mainly used for non-slip of airport and road, chemical factory board paving.

 

 

5) Precision casting: Investment casting techniques of stainless steel and aluminum casting in coating.

 

 

China Supplier Supply Calcined Bauxite With Best Grade

China Supplier Supply Calcined Bauxite With Best Grade

China Supplier Supply Calcined Bauxite With Best Grade


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Can anyone tell me which materials are fire-proof high temperature resistant material?
Fireproof high temperature resistant material is the synthetic material with fireproofing properties, or the material itself is high temperature resistant, heat-resistant, flame-retardant material. Fireproof materials are mainly used for construction with a variety of forms, which plays an absolute role in modern fire protection. The commonly used fireproof materials including fireproof panels, fire doors, fireproof glass, fire retardant coating and fireproof bag, etc.
Q:Why should graphitic refractory materials be used now that graphite can burn?
Materials for refractory must have the following characteristics and properties: 1, high stability: Anti-oxidation, anti-reduction, thermal decomposition; 2, high melting point : 2800℃; 3, low price. Graphite has all three characteristics and properties, especially melting point and stability.
Q:what's the standard of fireproofing material?
Class A1 is divided according to the combustion performance of GB8624-2006 building materials and products. Specific technical index requirements are: 1, the temperature rise ≤30 degrees;mass loss rate ≤50%; combustion duration time is 0; 2, main components, overall products, gross calorific value of external secondary components ≤2.0MJ/kg; any inner secondary component ≤1.4MJ/kg; (there are difference between homogeneous and non-homogeneous). Z802 building materials noninflammability testing furnace has to be used for testing technical indicators mentioned in test 1, using Z805 building materials combustion heat value to test technical indicators mentioned in test device 2.
Q:Can anyone say something about what A-level fire-proof decorative material is?
Combustion performance rates of decoration materials ratess combustion performance of decoration materials A incombustible B1 flame retardancy B2 flammability B3 high flammability The B1 rate combustion performance of gypsum plaster board and mineral wool acoustic panel absorber installed on steel joist can be used as A-level decoration materials. Inorganic decorative coating applied on the A level substrate can be used as A level decoration materials. Hope you adopt
Q:How about the prospect of refractory material?
Due to the rise of raw material, the prospect is not good with inflation, lower prices and decreased profits. The product requirements have been enhanced and there is vicious competition. Therefore, it is really bad.
Q:Using what kind of melting aluminium furnace refractories is more appropriate?
If it's the ordinary, you can use high aluminum refractory brick with general clay, GB/T 3994-2005 clay heat insulation refractory brick. If you need these with good material, there is high alumina thermal insulation refractory brick, GB/T 3995-2006 high aluminum heat insulation refractory brick, models have A13 and material is the alumina, A13 50 u, high insulating brick B5.Intermediate insulating brick B2, etc. Dolomite brick: good hang kiln performance, good erosion resistance, but brick is usually without f - CaO, hydration, and difficult to transport and storage, less used in the production. Magnesia-chrome bricks: good hang kiln, used in calcining zone. The disadvantage is that its thermal shock resistance is poor and plus hexavalent Cr is toxic, the production and use of magnesite chrome bricks in international countries gradually reduce. Now unit using the brick find replacements as soon as possible.
Q:Is the linear change on reheating the same as heating permanent linear change of refractory material?
“+”represents expansion. the afterexpansion and aftercontraction after cooled to be at room temperature. The change may significantly damage the masonry of thermal kiln. There are regulations on the linear change on reheating of common refractory material in the national standard. Some physical chemical changes may continue. It is defined as the change from being heated to the specified temperature of refractory material sample. Heat preserving for a while till afte cooling to be at room temperature, then the residual will expand or contract in its length, heat preservation for a while, organization vitrification, the irreversible changes of its length refers to heating the firing refractory to be at high temperature, so as to make the volume of refractory materials expand or contract, due to the influence of uneven temperature or lack of time, otherwise it will cause the deformation of the refractory ball and make this indicator within standard even reach smaller value, so firing control must be strengthened in product production. But it is should not be too high. For refractory materials with same chemical composition, the linear change on reheating is produced in the heating process. Properly increasing sintering temperature and prolonging the holding time is an effective process measures, make its firing inadequate. When subjected to high temperature, it can reduce the thermal shock resistance. Minus sign "-" represents contraction. The permanent line rate refers to heating the fire refractory ball to the specified temperature. Linear change on reheating, also known as residual linear change, is an important indicator to assess the quality of refractory in the long time use. To control the permanent line rate within the standard or reach the minimum value.
Q:How to deiron refractory?
Deironing refractory can take physical methods into consideration, such as magnetic separation, reselection, etc. And it can also take chemical methods, such as flotation.
Q:What's the frequently used refractory material?
Refractory material is generally used in industrial departments like metallurgy, glass, cement, ceramics, machinery, hot working, petrochemical industry, power and national defense. Frequently used common refractory: silica brick, semi-silica brick, clay brick, high alumina brick, magnesia brick, etc. Frequently used special refractory: AZS brick, corundum brick, direct-bonded magnesia-chrome bricks, carborundum brick, calcium oxide, chromium hemitrioxide, alumina, magnesium oxide, etc. Frequently used fireclay insulating refractory: diatomite product, asbestos product, insulation board, etc. Frequently used unshaped refractory: ramming refractory, refractory castable, plastic refractory, refractory mortar, gun-mix refractory, refractory coating, lightweight refractory castables, etc.
Q:What are the requirements for the performance of refractory materials?
Performance requirements for electric furnace lining refractory: 1, sufficient refractoriness and softening point. Because of eletric arc, the inner surface temperature of lining can be as high as 1500 to 1800 degree. 2, strong resistance to slag. Because the dust penetrate into the furnace through pore lining, and the refractory material subject to loss, leading to spalling. 3, good thermal and shock resistance. Because during steelmaking, opening door and lifting of the furnace will lead to sudden changes in the temperature of the furnace lining refractory material, so spalling and cracking may occur, damaging the lining premature. 4, enough strength, because the lining is impact during charging, tilted when vibration,and eroded by metal, slag and airflow. 5, the thermal conductivity shall be small, and the conductivity shall be low. The commonly used furnace refractories are dolomite brick, magnesia brick, high alumina brick, silica brick and magnesia ramming etc.. Because of different working conditions of the various parts of the furnace, the refractory materials are not the same.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range