Gate valve (gate valve) is a opening and closing the gate assembly, perpendicular to the direction of movement and direction of flow of the gate, gate valve can be fully open and fully closed, discomfort door parameter varies, usually 5 degrees, the medium temperature is not high for 2 ~ 52 '. Improve the process, make up the sealing surface angle in the process of the deviation, which is called the gate.
Standard or Nonstandard: Standard Structure: Gate Pressure: Medium Pressure Power: Manual Material: Casting Temperature of Media: Medium Temperature Media: Water Port Size: DN40mm-DN300 Place of Origin: China (Mainland) gate valve: Resilient Seated Flanged Cast iron gate valve: DI gate valve Packaging & Delivery
Packaging Details: air plastic bag inside/wooden box outside
Delivery Detail: 15--60days
Resilient Seated Flanged gate valve
resilient gate valve F5
face to face dimensions:DIN3202F5
Send a message to us:
Q:What does Z941H-25DN250 mean by electric gate valve (excluding electric equipment)?
9- electric (drive)4- flange connection (connection)1- plain wedge single gate valve (valve structure)H-Cr stainless steel (sealing surface material)25- nominal pressure is 25 kg, or 2.5MPa;DN250- valve by 250mm
Q:What's the difference between the knife gate valve and the stop valve?
Generally large and nominal caliber DN50 mostly with gate valve, especially industrial high temperature, high pressure, highly toxic and so on.Stop valve is able to stop and adjust flow, small footprint, small size, generally less than the nominal diameter, DN50 occasions use it. Two can be closed, in the flow of linear requirements are not high, you can adjust the flow. Just because of its structural characteristics of the valve to make its flow resistance, so there is a demand for throttling with a little more than the gate valve. In addition, the cut-off valve, whether it is a formal or reverse installed, in the opening and closing process, there is always a very difficult, and therefore can not do a great deal, or it is not easy to open and close. In addition, the cut-off valve has a one-way sealing effect of good features, so in the prevention of reverse flow of the working fluid, it also has a place to play.Hope to be of some help to you!
Q:Gate valve z41t what does that mean?
According to the provisions of the JB/T 308-2004 valve type programming method:Z = gate valve4 = connection form: flangeT = sealing surface material: copper alloy
Q:Is the axial force and torque of the wedge gate valve the same?
B higher temperature. C nice wedge single gate valve is suitable for high temperature medium easy to coking. Flexible gate valve features: high temperature, a wedge type single gate valve in a special form. Comparison with wedge gate valve.
Q:Why does the centrifugal pump start and stop in the case of closing the gate valve?
The centrifugal pump starts and stops in the case of closing the pump outlet valve. Start off the pump outlet valve is to reduce the starting current, stop when the pump is closed, the outlet valve is to reduce water hammer, prevent blade from bad.
Q:What kind of copper gate valve copper content standards, there are no national standards?
Copper gate valves are made of brass and bronze, and the national standard does not require copper content.
Q:Function of gate valve
Valve strengths: (1) fluid resistance is small, due to the valve inside the valve channel is straight, and the medium flow through the valve does not change its direction of movement, so the fluid resistance is small. (2) the opening and closing moment is small, opening and closing more effort, as the gate valve opening and closing, the direction of movement of the gate and the direction of the media movement vertical, compared with the cut-off valve, valve opening and closing more effort. (3) the direction of the movement of the media is not limited, no disturbance, no pressure reduction, the media can flow in any direction from both sides of the gate valve, and all can achieve the purpose of use, more suitable for the direction of the movement of the medium may change in the pipeline. (4) the length of the structure is relatively short, because the gate of the gate valve is vertical inside the valve body, and the stop valve clack is horizontally placed in the valve body, so the length of the valve is shorter than the cut-off valve. (5) the sealing function is good, when the full opening, the sealing surface is less eroded. (6) when fully open, the sealing surface is less eroded by the working medium than the cut-off valve. (7) the shape is relatively simple, the forging technology is good, and the scope of application is wide.
Q:Analysis of the advantages of elastic seat sealing gate valve?
Most of the valve is forced seal, that is, when the valve closed, to rely on external force to force the gate to the seat, in order to ensure the sealing surface sealing.When opening the gate valve, when the gate lift height is equal to 1:1 times of the gate diameter, the passage of the fluid is completely unblocked, but at run time, this position is unable to monitor. In actual use, the top of the stem is used as a sign, i.e., the open position, as its fully open position. Temperature changes appear to consider locking phenomenon, usually open to the vertex position, and then rewind 1/2-1 circle, as a fully open valve position. Therefore, the opening position of the gate valve is determined by the position of the gate (i.e. the stroke). The sealing surface is easy to wear and tear, affecting the service life. When opening and closing, gate and valve seat two sealing surface friction, sliding, to medium pressure under the action of easy to produce abrasions, wear, affect sealing performance, shorten service life.
Q:What do you mean by forged steel gate valves 800LB DN20 SW?
Forged steel gate 800LB pressure DN20 is by SW said socketweld (connection)
Q:Is the gate valve flanged?
The most commonly used gate valves are threaded connections, flanged connections, and welded connections.Like the outer thread connection, the clamp connection, the card sleeve is seldom used.