Detailed Product Description of Aluminum Window
a. UV resistantaanever fade or discolor
b. Energy saving and Eco-friendly
c. Sound & Heat insulation
d. Easy Instrall ,clean
Specification of Aluminum Window
European style; American style
Sliding, casement, turn-tilt, tilt-sliding, single-hung, double-hung, etc.
Different countries have different demands for it; Special shaped windows also can produce. You can design the windows by yourself.
1.2-2.2mm, thermal break aluminum profile
Single, double, tripled glass; double glass with grille
Low-E glass, Tempered glass, floated glass, reflective glass, OBS glass, etc.
Thickness: 4mm, 5mm,6mm,8mm; Space: 6mm,9mm,12mm,16mm, etc.
U form galvanized steel; 1.2mm, 1.5mm, 2.0mm, 2.5mm
Rubber sealing strip, black or grey color
High quality Chinese hardware, (Multi-point lock and handle) , G-U or ROTO also can be used
Metal and nylon material
- Q:What is the difference between tempered glass shed and tempered glass and canopy sunshine shed?
- Light steel glass canopy focus on just the material for the light steel, tempered glass canopy focus on the glass material for the tempered glass, are glass canopy, but the name of the focus is not the same, light steel glass canopy glass can also be used Glass ah
The loads of light steel canopy include the weight, wind load, snow load and live load, in which the snow load is not taken into account, the wind pressure is positive or negative, a certain range of negative pressure is beneficial to the structure, the actual calculation Considered separately. Through the comparison, the design and calculation of the most unfavorable conditions of the combination of the dead weight, the wind load and the live load are carried out, including the calculation of the force combination of the glass and steel glass sheds, the calculation of the glass strength and the checking of the glass deflection, and finally the selection of the material The
In the light steel glass canopy glass plate drilling processing, the connection part of the support device in advance openings, add water seal ring processing, to avoid the site to produce a higher stress concentration. Light steel glass canopy should be wiped clean before the surface, and according to the weight of the glass to determine the reasonable number of suction cups to ensure the safety of construction. By connecting the jaws to connect the glass, the installation should be checked before the glass drilling and splicing claws connected to the casing position, and timely adjustment. After the glass is fully installed, check the flatness and verticality of the light-glass glass canopy, the glass seam, and the width of the light-glass glass canopy to meet the needs of the shed in the temperature change and the structural displacement. Touch the request at the same time in the seam when the tensile deformation of their own to meet the temperature changes and structural lateral displacement of the joints to widen the requirements.
- Q:How to measure the size of the glass on the glass structure of the steel structure
- The splicing jaws serve as an important accessory to the glass curtain wall, which plays an important role in the connection of the glass curtain wall. The mechanical properties are particularly important by passing the load to the steel structure or other body structure through the splice joint. Of the installation staff, the installation of the curtain wall when you need to master a lot of technical and knowledge points.
- Q:What is the splice
- Split joint style is divided into: floating head type, countersunk type, sewing type.
Floating head is the most commonly used is not expensive.
The countersunk head can not see the protruding joints than the glass surface.
The stitching of the splice fitting does not require the opening of the glass, but it is more expensive and less widely used.
- Q:What is the price of the glass sheds?
- Usually stay between 10mm glass glue joints, connections are two glass center hole spacing 220mm, from the heart to the glass edge of the hole is: (220-10) / 2 = 105mm
- Q:The production of curtain wall glass splicing claws of the big brand which several!
- I heard a friend introduced a good with a good, so very good, the price can be, the quality did not say that after all, is a strong sub-brand. Hope to help you.
- Q:What are the metal members connecting the glass and the glass ribs in the glass curtain wall?
- Called the claws. The splicing jaws are mainly used as support joints and transfer loads to a fixed support structure, which is an important accessory to the glass curtain wall.
- Q:Do you want to glue when you install a splice?
- The point curtain wall is connected by a splice joint, a splice joint and a splicing jaw connection, a splicing claw and a support system.
- Q:Are there any requirements for the weld grade of the curtain wall connection?
- This is generally described in the design of the curtain wall
- Q:250 type curtain wall glass connection pawls how much punch
- Directly check the type of 250-type point curtain wall joints, see the size of the joints to know.
- Q:How many of the glass curtain wall are to be welded to the pillar
- This should be based on the specific force of the situation, with 200 series of split claw example, one kilogram bearing 150 kilograms of glass
We make every step strictly, especially for testing. We have spectroscopy analysis, metallographic microscope, tensile, hardness, impact and X-Ray test, liquid penetrant, magnetic particle test and NTD inspection. The interpretation of the data from these test facilities could promise the best quality of our raw casting, any required test report of process should be attached before delivery of all the casting parts of each.
1. Manufacturer Overview
|Annual Output Value
||ISO 9001:2000;ISO 9001:2008;QS-System nach EN 764-5, Abschnitt 4.2, und AD 2000-Merkblatt W O
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range