ALUMINUM SHEET FOR NAME PLATE AND NAME CARD

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 m.t.
Supply Capability:
1000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Grade: 1000 Series,2000 Series Surface Treatment: Coated Shape: Round
Temper: Half Hard,Hard Application: Decorations

Product Description:

                                                                                                                                                                                                     SPECIFICATION:

ALLOY:3105;TEMPER:H16,    

1.06mm ×1219mm×2438mm

                                                                                                                                                                                                          TOP SIDE: COATED WHITE COLOUR,PE, 38-40 micons( +/-2 micron ), GLOSS :85°-90°(±1°);(ACCORDING TO SAMPLE NO.KY-H209)
BACK SIDE:CLEAR WASH, PE,TRANSPARENT 2-3 microns;  TENSILE STRENGTH:175-235MPA;ELONGATION:2 %;
ALUMINUM SHEET STANDARD: GB/T 3880-2006;COATING STANDARD: YST 431-2009

 

We are able to supply 1,2,3,5,6,8 series alloy coil, foil ,circles,and sheets, including 1***, 3***, 3104, 5052, 5182, 5754, 5083,5086,8011.

We have been supplying Alu. Products for the global customers for more than 25 years and 6-sigma Quality Management System guaranteed. I assure you that our product can meet all your needs and be fully annealed.

 

 

1) What is your delivery time?

Our regular production time is over 30 days, It depends on the order quantity also.

 


2) What is your payment term?

We accept T/T, LC at sight, Usance LC 30, 60, 90, 120, 180 DAYS

 

 

ALUMINUM SHEET FOR NAME PLATE AND NAME CARD

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:1mm aluminum sheet, stamping, die opening, how much is it?
According to your needs, there are two practices:1, the official commodity mold, using 4-8 tons of punch or cylinder as a power to suppress, so that the mold should be around 2000 yuan.2, the use of simple mold, direct processing of an upper mold, a lower die, probably costs around 500 yuan. Or cheaper.
Q:how to avoid oxidation of aluminum sheet after wire drawing?
leave it alone after wire drawing!aluminum sheet will formulate a layer of dense oxide film. So you don't need to worry about it! Don't often polish the aluminum wire, or they will be more and more slimsy, the oxide film is used for avoiding reoxidation.
Q:Who knows the ceiling size of aluminum hang-parcel?
Buckle plate ceiling is the most general ceiling materials, it suits for decorative materials for the ceiling of kitchen and toilet. It has good dampproof, oil contamination resistance , and inflaming retarding feature. And it has elegant appearance and is convenient for transportation and usage. Aluminum buckle plate is square and it’s general size is 300*300,300*600,600*600, it’s thickness generally is 1.2mm.
Q:aluminum ore is not formed in quebec (why not?)?
Bauxite is the most common aluminum ore. Bauxite forms in tropical regions because its formation requires intense weathering conditions (lots of frequent rainfall) with a very good drainage. Even if, due to continental drift, Quebec was once in a tropical region, it is highly unlikely that bauxite would have formed there because almost all of Quebec sits on the Canadian Shield. The Canadian Shield is a large region of very, very old rock that can be thought of as mostly monolithic and quite flat. Its monolithic nature makes it difficult to weather, and its flatness means that it doesn't drain as well as is needed to form bauxite. Smelting bauxite requires enormous amounts of electricity - not just any energy, but electricity. Quebec has enough hydroelectric resources to make this practical.
Q:The white powder often found on objects made of aluminum is aluminum oxide. Al2O3?
molar mass.. .. molar mass Al2O3 = 2 x 26.98 + 3 x 16.00 = 101.96 g/mol mass %'s based on formula .. % Al in Al2O3 = (2 x 26.98 / 101.96) x 100% = ___ % .. % O in Al2O3 = (3 x 16.00 / 101.96) x 100% = ___ % mass % based on experimental data .. % Al in oxide = (5.00g / 9.36g) x 100% = ___% .. % O in oxide = ( (9.36g - 5.00g) / 9.36g) x 100% = __ % and finally .. % error = (|measured - accepted| / |accepted|) x 100% = ___% ********* here's the answer for the ALUMINUM calcs .. % Al in Al2O3 = (2 x 26.98 / 101.96) x 100% = 52.92% .. % Al in oxide = (5.00g / 9.36g) x 100% = 53.42% .. % error = ( | 53.42% - 52.92% | / | 52.92% | ) x 100% = 0.95% you get to do the oxygen calcs
Q:is aluminium safe?
Some. The chemical aluminum can get into your blood accumulate. Years ago, there was a study of weather blood aluminum was the cause of Alzheimer disease. Was proven not to be. But that study helped to reduce the amount of aluminum in deodorant sticks.
Q:recycling aluminum?
To electrolyse aluminium oxide, it has to be molten. However, the melting point of Al2O3 is extremely high ( 1000°C), and that would make the electrolysis very inefficient. However, Al2O3 dissolves in cryolite at much lower temperatures (lower than 900°C), which makes it a much more viable process.
Q:What is the amperage setting on a tig welder when welding aluminum?
Best electrodes to use for Aluminum welding is 1.5% lanthanum oxide (gold color code.). 2% zirconia (brown) or 2% thorium oxide (red) can also be used. Note that zirconia-doped electrodes should never be used for DC welding. A lot of welders like to quote offhand the rule 1 amp for every 0.001 inch of thickness. This applies to steel, stainless, and nickel alloys only. Due to the lower melting point, lower specific heat capacity, and higher thermal conductivity of of Al, this rule should NOT be used for Al! I recommend welding a test piece first with the same joint configuration and thickness of the part you intend to weld. Note that fillet welds require more current than butt welds or edge welds. Start out by using 2/3 amp per 0.001 of thickness, in other words, reduce the current of the above rule by about 30-40% . Make 3 test weld, then check to see if there's any visible penetration on the other side. If you don't see any through-pentration at all, increase the current by about 10-20 amps and test again.
Q:aluminium machinery need your help?
Yes you can use a router on aluminium. Use some kind of a fence, a piece of angle iron or a block of hardwood. Use a new bit, an old dull one will cause you problems. Pre-drill smaller holes than the slot width at each end of the slot. Stay back away from the end of the slot about 1/32 of an inch. Make several passes, at a depth of about 1/16 of an inch, per pass. If you can, make the slot with a bit smaller than the finished slot width. Use a 3/16 bit for a 1/4 inch slot. Use a 5/16 bit for a 3/8 inch slot. This will give cleaner slot edges and allow you to accurately make the slot width that you want. You can do this dry, but a little WD-40 oil will give even cleaner slot edges. Also climb mill the last pass on each slot edge to give a better/ smother edge. Climb Milling is pushing the router backwards of the way you normally travel in wood. Ben
Q:Need help with cleaning baking aluminum pans...that are mess!!?
put pans in sink boil some water with cream of tartar and pour on pans allow to soak as water cools scrub pans should take care of issues

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range