New hot stage light CA350 350W BWS Moving Head Light
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Technical Parameters
Voltage: AC90V~240V/50-60Hz
Average lifespan: 1500 hours
Power:420W
Focus: Linear adjustment
Lamp: YODN SIRIUS HRI 350W
Dimmer: 0-100% linear adjustment
Color temperature:7500K
Strobe: Mechanical shutter 0.3-25 F.P.S
Ballast:E-ballast
Color/Pattern/Effect
Color:14 color + blank color wheel
Wash effect:Adjustable wash effects angle
Two prisms:8-facet and 16-facet prisms, bi-directional rotating at variable speeds, prism can be zoom in/out.
One Fixed Pattern wheel: 15 fixed patterns + blank, rainbow and shade effect
One Rotating Patten wheel: 9 interchange pattern + blank, rotating and gobo position effect.
Beam angle:
Control system
*Control mode: DMX/ART-NET/RDM/Single Mode/Master/Slave mode
*Pan/Tilt speed: Pan 2.6sec/540°; Tilt 1.24sec /239°
*Channel: 20 in standard mode and 24 in extended mode
*Time function: Menu record overall operate time and working time of light and lamp
*Motor: 9pcs mute sound motor, 2pcs three phase motor, 16bit driver,
*IP set: Automatic charging battery, IP could be set without electricity
*Pan/Tilt: X axis 540°; Y axis 239°, automatically accurate positioning
*The menu display 16 million pixel color LCD touch screen; screen can display upright, inverted, and adjust the brightness of the background, in both English and Chinese can freely switch.
*The intelligent control of the cooling fan (the radiator is completely controlled by the state of the lamp and the requirements for the intelligent control to ensure the service life of the bulb and the normal working state).
*Electronic sensor detection reset error function, automatic correction work
*Modular structure for easy maintenance
Appearance parameter
High temperature Engineering plastic, IP20
Net weight: 22Kg
Body size: 41x27x64(cm)
- Q:Is there a better illustration? Ask a professional to give an illustration
- 240, light control desk how to program, hello novice is difficult to learn through the manual to learn console programming, 240 console, there are two conventional, one with a joystick or rotating wheel is a white, very wide kind of not
- Q:What is the 1200W lighting lamp computer size? Thank you
- The diameter is the diameter of the largest diameter of light, is light when placed on both sides of the pressure diameter minus edge part, namely the maximum size of the diameter of light imaging. In general, the maximum diameter of computer light is about 53.5mm, and the minimum diameter is about 29mm.
- Q:specific time points trigger lighting the designated area 100I am confused, shaking his head lights and problem program synchronization, and lighting controller DMX, previously used this product: --USB DMX computer controller --LED PA lamp, a computer program cycle play movies, movies to a specific point in time, LED PA lights. If it is the same, shake the head lamp can also use, but shake head lamp Gu Gu more shook the head function, and found that shake head lamp more than a power reset action, unlike LED PA lamp is positioned. If you can, please help us, can you provide a solution?! Thank you for putting it away firstThis problem will not be so difficult, we help ah!
- Programming yourself, that's for sure.Software, if you have, or your friends, colleagues, manufacturers can provide, naturally not the problem.If not, only buy.As for the control process, it is very simple.Just like you said, you just need software, DMX controllers, lights, and so on.If there is a thyristor, you can give the control signal directly.
- Q:Who will set the DMX512 keyboard is to control the shake head lights hurry ah?
- Function1, open the power supply, wait for about 5 seconds, digital screen shows "101", press the "bank" button up and down to select the program number to run;2, click "auto/del" button that will run the program, adjust the "SPEED" and "FADE TIME" fader can change the running speed and time, the program can be run in the press "bank" on the key to run the program, click "Blackout" button will enter the suspended state.delete1, open the power supply, wait for about 5 seconds, digital screen shows "101", press the "program" button for about 3 seconds into the programming state, corresponding to the digital screen "program" indicator light flashing;2, press the "bank" button up and down to select the program number to be deleted;3, at the same time press the "auto/del" and "scenes" under the 1 key, the board all the lights flashing a few times, to prove that the first scene has been deleted;4, at the same time according to "auto/del" and "scenes" under the 2 key, the board all the lights flashing a few times, to prove that the second scenes have been deleted, so repeated to do, you can delete the 8 scenes.
- Q:What do you mean by "3 in one"?
- Beam, dye, pattern three in one, the pattern can rotate, zoom in and out.
- Q:How to use a shake head lamp without a console?
- You can use the shake head, built-in walk program, set the master-slave mode, all shake head lights will go at the same time, it is best to buy a light control table, lights less, buy a few hundred can be
- Q:How to control the head light with the music rhythm?
- My God, I can ask you this question. I see you are a beginner
- Q:Chengdu, where is there a place for professional acoustics, stage lighting, wireless microphones, and head shaking lamps?
- Chengdu brilliant lighting audio equipment Co. Ltd provides various performance equipment rental service, the company has skilled lighting engineers and sound engineers and technicians; with the international advanced level of professional audio equipment; include: linear array speaker, conventional amplifying system, full frequency, bass, amplifier, mixer, reverse feeding, microphone, CD player, MD, DVD, effects, processor, signal distributor, lighting equipment; computer lamp, PAR lamp, LED lamp, spotlight, and row, strobe lights, laser lights, audience, lights, searchlights, silicon imaging vehicle and lighting control system. Video equipment;
- Q:How to program the computer shake head lamp?
- First: you must understand the characteristics of the light, such as several channels, each channel features such as color, pattern, horizontal, vertical, in the first few channels!Second: you have to calculate how many lamps you have, the total number of channels for all lights, and how many channels you can use to control the number of channels!Third: you must know how to dial the address code. In order to facilitate the control, you must combine the number of channels of the controller and the light to dial the address code!
- Q:Beam230 how do you use the shake head light and max512?
- Turn the power 1, turn on the power and wait for about 5 seconds to display "101", according to "program" button for about 3 seconds into the programming, the corresponding digital screen "program" indicator light flashes; 2, according to the "keys" bank choose to edit the program; 3, choose to control the lights, press the number keys scammers below;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
New hot stage light CA350 350W BWS Moving Head Light
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 1000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords