Order On-line Tracking
ZX Loading Bellows are used for efficient, dust controlled discharging of dry, dusty bulk solids into ships, barges, or stockpiles. This type of loading spout is provided with inner tapered cones to contain the flow of material and an outer bellows to provide for dust removal.
First the Loading Bellows is lowered from stand-by position towards the ship hold or stockpile. As soon as the bellows outlet touches the ground, a slack cable switch mounted outside the transmission box stops lowering of the bellows. The limit switch inside the transmission box stops both full extension and contraction of the bellows. Material loading starts by opening the silo outlet valve.
Once the bellows is fully contracted, the cable limit switch inside the transmission box stops operation.
Inlet diameter: 500 mm (32 in)
Maximum throughput rate: 850 m3/h (1,060 cfm)
Operating temperature: -40 ~ 150 °C (-40 ~ 300 °F)
Excellent dust-free loading due to special bottom skirt design
Two lifting cables outside material flow raising and lowering the loading bellows without cable wear by material friction and obstruction to material flow
Two level indicators outside material flow
Single bellows, double bellows or single bellows with internal steel cones
Various bellows and fabrication materials available according to material handled
Control panel with remote control
Available with different types of level indicators
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|