Walkie Stacker- CDDRD10/12
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
MODEL | | CDDRD10 | CDDRD12 |
Power supply | | Driven by AC motor | Driven by AC motor |
Operation type | | Pedestrian | Pedestrian |
Capacity | Q(kg) | 1000 | 1200 |
Load center | c(mm) | 600 | 600 |
Front hanging distance | x(mm) | 630 | 630 |
Wheelbase | y(mm) | 1146 | 1146 |
Service weight(with battery) | kg | 580 | 590 |
Tyre size, front | | φ250×70 | φ250×70 |
Tyre size, rear | | φ80×70 | φ80×70 |
Height, mast lowered | h1(mm) | 1980/2330 | 1980/2330 |
Lift height | h3(mm) | 1600/1950 | 1600/1950 |
Height, mast extended | h4(mm) | 1980/2330 | 1980/2330 |
Overall length | l1(mm) | 1780/1860 | 1780/1860 |
Overall width | b1(mm) | 820 | 820 |
Fork length | m(mm) | 60/170/1070(1150) | 60/170/1070(1150) |
Aisle width for pallets 1000×1200crossways | mm | 2180 | 2180 |
Aisle width for pallets 800×1200 lengthways | mm | 2220 | 2220 |
Turning radius | Wa(mm) | 1338 | 1338 |
Travel speed, laden /unladen | Km/h | 5.3/5.6 | 5.3/5.6 |
Lifting speed, laden/unladen | m/s | 0.11/0.19 | 0.11/0.19 |
Lowering speed, laden/unladen | m/s | 0.16/0.11 | 0.16/0.11 |
Battery Voltage, nominal capacity K5 | V/Ah | 24/65 | 24/80 |
Battery weight | kg | 48 | 50 |
-------
Advantages:
Safety and productivity
●AC motor with high transmission efficiency, without replacing the carbon brushes, it has a good ramp starting performance.
●Low center of gravity, good stability and smooth running.
●Small minimum turning radius and excellent steering operating performance.
●Using the most advanced technology of AC variable speed, which makes the motor more reliable and maintenance-free.
●Achieving the control of both the walking speed and the lifting speed.
●With the shock device, it greatly reduce the noise.
●Sideway moving battery easy for replacement and maintenance.
●The Multi function display instrument with BDI, fault code, working time and speed display function.
●Using the built-in charger which makes it easy to disassemly according to different customers’ requiremet.
●Adopting Integrated electrical system, the line is clean and beautiful, it is easy to assembly and maintain,
●Using environmentally friendly maintenance-free lead-acid battery.
●Single Colum mast with wide view for operator.
●Using environmentally friendly maintenance-free lead-acid battery.
●Adopting programmable control technology with fault diagnostic function.
●With emergency brake function improve the safety operation.
●With low-voltage protection functions.
●With fault diagnosis and maintenance functions.
●A machine with many other functions, it can configure a variety of hydraulic lifting attachments.
- Q:The wear-resisting parts in the broken machine are mainly the direct contact with the material
- The production plants of anti-wear materials are found all over the country, so that it is better to take the nearest, or increase the freight and increase the cost. It's not realistic to buy things at a low price. Where are you, the specific manufacturer can search on the Internet.
- Q:The development of material handling
- Due to the improvement of industrial production automation degree and the expansion of production scale, in the process of the production and material handling cost has had a huge impact on the profit, to promote more and more used in the production of large enterprises, efficient, automated material handling machinery. Along with the material handling equipment manufacturing enterprises in the international market competition ability, and stable and continuous development of economic construction in developing countries the market need, the world market for material handling machinery in our country's overall demand will continue to increase.
- Q:Why should we emphasize unitization and standardization in material handling
- Unitization is the application of scale thought to different materials. We can simplify the links, save the cost, and realize the overall optimization. To facilitate the mechanization of loading and unloading, reduce the labor intensity and improve the efficiency of the work. Reduce the damage caused by the transformation and improve the quality of logistics.
- Q:Talk about how to cut the cost of moving materials.
- There is limited room for human efficiency.I hope my answer will help you
- Q:There are three things to do when the material is stacked up and down
- Fire prevention, waterproof, and do not exceed the limit.I hope my answer will help you.
- Q:What is the proof of working in mechanical design?
- The mechanical engineer qualification exam outline (trial) is the Chinese mechanical engineering society, the ministry of education test center for mechanical engineering and technical personnel in our country one of technical qualification certification exam standards documents. It is a mechanical engineer declarant qualification to participate in "comprehensive qualities and skills" the basis of a review test for reference, is to write "mechanical engineer qualification examination instruction" and so on the basis of learning materials, is carried out around the student counseling on the basis of, is the basis of a qualification examination proposition. This outline is divided into four parts: Ⅰ. Basic requirements, Ⅱ. Exam content, Ⅲ. Regulations and instructions, Ⅳ. Sample questions example. Basic requirements part aims to show that as a qualified mechanical engineer, should actively adapt to the world manufacturing industry globalization, informationization, greening and the trend of the development of the service, strive to improve their own comprehensive quality, become a good professional ethics and innovation concept, master machinery manufacturing technology, understand the economic and management knowledge as well as the relevant international rules of a new generation of mechanical engineering and technical personnel.
- Q:The principle of material handling
- Planning principles: plan all material handling and storage activities to achieve maximum overall operational efficiency. 2, the principle of system, to integrate various handling activities and suppliers, purchase, storage, production, testing, packaging, storage management, shipping, transportation, and the customer's operating system as a whole.
- Q:The material needs to be transported, it is easy to produce dust.
- We're doing the granule engineering, and we can talk about this: First: the properties of material itself, temperature, contact material, ability, distance and so on The second: the material that produces dust easily, the simplest principle is relatively close, ideal method is low speed of course. Third: as far as you are going to be able to transport it, you will have to sit down and discuss it
- Q:Material handling system in the factory
- The machinery factory's internal logistics system involves the production plan, process flow, moving operation, warehouse management, information system and so on.
- Q:What is the material handling and handling equipment?
- ?The shelf storage system Pallet racking | cantilevered shelves shelves | | gravity type rotary rack | pick racking system 4. Automated multi-layered storehouse stacker | | stacking robot horizontal rotary automatic vertical type rotary library | automatic library | tray type automatic library 5. Cold chain equipment Refrigerator car | | cooler cold box | | 6. Other refrigerator storage site finishing equipment workshop equipment | turnover box | flexible bar | | plastic cage car truck 7. Bar code identification system data acquisition equipment | radio frequency identification (RFID) system | data terminals
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Walkie Stacker- CDDRD10/12
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords