Sillimanite Brick SAS60A
- Ref Price:
-
$982.11 - 1,200.35
/ m.t
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 5 Tons m.t
- Supply Capability:
- 500 Tons Per Month m.t/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Information of Silimanite Brick SAS60A
Silimanite bricks are based on silimanite raw materials and a bond matrix made of reactive aluminas, refractory clays and ultra fine silimanite. The SAS60B silimanite bricks are produced by sintering under high temperature.
Characteristics of Silimanite Brick SAS60A
Compared with the high alumina bricks, silimanite bricks have better performance with the following features:
Strong resistance to crossion
High tensile strength
Thermal shock resistant
Typical Application of Silimanite Brick SAS60A
The silimanite bricks are used in the steel and non-ferrous metals industry, which are in direct contact with liquid metal are possible. The SAS60A sillimanite bricks are very good for refractory solutions in the glass industry, cement industry and incineration, for industrial processes with rapid thermal shocks, in furnaces for firing biomass and in production kilns of the ceramic and refractory industry.
Technical Data of Silimanite Brick SAS60A:
|
Sintered Silimanite Brick---SAS60 | ||
|
Physical Properties: |
|
|
|
Refractoriness |
℃ |
1790 |
|
Apparent Porosity |
% |
22 |
|
Bulk Density |
Kg/m3 |
235 |
|
Cold Crushing Strength |
Mpa |
50 |
|
Refractories Under Load(0.2Mpa) |
℃ |
1650 |
|
Reheating Linear Change (1400 ℃x2h) |
% |
+0.1～-0.1 |
|
Chemical Analysis: |
|
|
|
Al2O3 |
% |
60.0 |
|
SiO2 |
% |
36.0 |
|
Fe2O3 |
% |
1.2 |
We has success in silimanite bricks due to their cost-effectiveness, excellent thermal shock resistant and resistant properties. CNBM also has experience in silimanite application and would like to assist you in product selection, system design, and installation techniques.
- Q: I am a student of refractory materials. I would like to know the general rank of national refractory materials company
- GL-60, high temperature daub, rock wool pipe shell, high quality magnesia brick, high alumina castable explosion-proof, high strength steel fiber steel fiber reinforced corundum castable, refractory castable, alkali brick, sillimanite brick, high alumina brick insulation level, wear-resistant castable, refractory castables for large power plant, silicon mullite brick, alkali resistant castable, blast furnace iron trough castable, super high alumina brick, magnesia spinel brick, castable, magnesia chrome brick, high alumina low cement castable, rock wool board, aluminum corundum brick, magnesia brick etc..
- Q: What kind of refractory material will be used in the glass kiln?
- 1. compact chromium oxide brickIt has the best resistance to high temperature E glass corrosion, its erosion basically does not cause pollution to the glass liquid, so it has become the first choice of E glass unit refractory bricks.Dense chromium oxide is formed by isostatic pressing. Its density is very high. The main technical indexes include Cr2O3 content >94%, porosity <15%, volume density >4.24g/cm3, and erosion loss only 1/10 of compact zirconia brick. Used in the E glass furnace unit kiln, directly contact high temperature molten glass melt, wall, melting parts, high temperature parts, pool bottom, main channel, pool wall and pool bottom, transition channel, pool wall, etc..
- Q: Is it good for your cupola to use that kind of refractory, high aluminum brick, clay brick or red silica?
- The high aluminum clay brick is slightly more stable and can be used!
- Q: Sillimanite brick
- Sillimanite brick is made of sillimanite minerals by high temperature firing or mud casting prepared the good properties of refractory brick.
- Q: What refractory materials are adopted in each part of the blast furnace?
- The furnace throat is a part of the direct impact and friction when the burden drops, and the high density and high alumina brick is usually adopted. The upper and middle shaft temperature is only 400~800 degrees, the parts with high alumina brick and sillimanite brick. The lower part of the shaft due to high temperature and dust by scouring and alkali metal vapor erosion, so the requirements for the slag resistance, alkali resistance and high temperature resistance, wear resistance of high quality clay brick, high alumina brick, carborundum brick or corundum brick. Belly temperature reaches 1400~1600, and slag, steam erosion, erosion and corrosion is strong, therefore, the silicon carbide reaction bonded silicon carbide brick.
1. Manufacturer Overview
| Location | Shandong, China |
| Year Established | 2002 |
| Annual Output Value | Above US$ 83 Million |
| Main Markets | North America;Eastern Asia;Southeast Asia;Western Europe;Middle East;Africa |
| Company Certifications | ISO 9001:2008 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Qingdao |
| Export Percentage | 60% - 70% |
| No.of Employees in Trade Department | 21-50 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 20,000 square meters |
| No. of Production Lines | Above 14 |
| Contract Manufacturing | Design Service Offered |
| Product Price Range | High; Average |
Send your message to us
Sillimanite Brick SAS60A
- Ref Price:
-
$982.11 - 1,200.35
/ m.t
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 5 Tons m.t
- Supply Capability:
- 500 Tons Per Month m.t/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
