Q:Which mobile shear fork lift is better

Mobile shear fork lift There are four major systems, The mechanical structure system,

Q:What is the difference between elevator and elevator

Just everyone's name is different.I hope my answer will help you

Q:Can the stepping motor drive the hydraulic platform?

The hydraulic platform is driven by an oil cylinder, and the motor drive is a completely different way through mechanical means (screw, chain, gear, rack, etc.). In addition to mechanical means, depending on the power size, the step motor usually means that the equivalent power is not much, the maximum is a few hundred watts. The hydraulic platform is generally heavy, so it's unlikely. Or do you use a step motor to drive the hydraulic pump? It can, but also to consider the power problem, said earlier, smaller power stepping motor, if the original motor is a few kilowatts, certainly not.

Q:Who can tell me the purpose of the elevator? The more, the better

Walking auxiliary dual mast lifts: ability to work in different condition, without external power supply, mobile and flexible, easy to operate, lift freely, only one person can complete forward, backward, steering, fast, slow to walk and up and down movement, save work, energy saving. Especially suitable for the station, docks, airports, stadiums, large enterprises such as large range of aerial work in domestic at present is the most ideal aerial work equipment. The series is a two-mast lifting system with strong stability and other characteristics.

Q:What is the phenomenon of the worker's transport of wood using a lift

It's normal. This series of products for indoor type, widely used in star-rated hotels, such as the large supermarket industry lobbies, the aerial work inside the factory, has a balance, convenient operation, can enter the hall, can freely in and out of the elevator and less consumption, no pollution, work does not hurt the earth, can be used for wall and out work, work no dead Angle. The single column aluminum alloy electric elevator is fitted with the gantry cross attachment, which is suitable for the maintenance of movie theater, synagogue and church. The long door is easy to assemble, easy to operate, flexible to move, can span up to 1.1m fixed seat and other obstacles, and can stabilize the work on the step. High strength rectangular steel pipe making, rigid and stable. It is equipped with multi-wheel and flexible. Both ends can be adjusted, which can be used to cross different obstacles. The two sides are vertical adjustable, which can be used for the incline or step of a certain incline

Q:There are different kinds of milling machine and vertical lifting machine milling machine

Start by figuring out the difference between vertical and horizontal The main shaft of vertical milling machine is perpendicular to the workbench, and the spindle of horizontal milling machine is parallel to the workbench. The knife of vertical milling machine is relatively flexible, the scope is wider. Can use vertical milling cutter, machine clip, bit etc. Milling keyway, milling plane, boring hole, etc.

Q:What device is better to design a platform that is 1 square meter or so?

Elevating elevator, lifting platform, four-wheel mobile elevator, aluminium alloy lift, fixed lift, rail lift, truck lift

Q:How to choose the platform and how to use the method

The purchasing and lifting machinery should not be bought blindly, should be fully market research, and field inspection, determine the size of the company and its credibility. This is one of the first is also a must, many small businesses in order to seek the market now violence and cut corners, so that the lifting platform quality is greatly reduced, although they will sell very cheap, but this kind of machine is not a long time, and the risk is big. As a result, it is a pity that the buyer should not be greedy for a small price.

Q:How do you remove the horizontal universal elevator milling cutter

When the milling cutter is removed from the vertical milling machine, the lever nut must be released and then the end of the rod is gently tapped. ; You should not release too much, as long as you have some loose space. When you release too much, the thread connecting the rod and the milling cutter is too short, and when you tap, you slip and even drop the knife.

Q:How does the elevator repair

All parts should be filled with lubricating oil to extend the life of the bearing. The oil and oil level of hydraulic oil. The platform rises all the way up, and in this position, the hydraulic pressure should be 40 to 50 mm above the bottom of the box. Hydraulic oil is a variation of dark, sticky or grit, such as a discovery should be replaced in time (32 # hydraulic oil) Annual maintenance A. check all the hydraulic pipes and connectors. The pipe shall not be broken, the joints shall not be loose, and all the joints must be tightened. Remove and disassemble the descending valve, blow the plunger through compressed air, then load and resettle. C. the elevator hydraulic oil is put in the rejected, tighten the joint remove oil filter, after cleaning, use compressed air is clean, and then back into the tank, and the connecting line. (put on new oil and don't keep using the old oil. Otherwise, the moving parts in the system will accelerate the wear and tear.)