Q:What is the B axis of the NC table of the horizontal machining center and what is the mode of movement?

Rotational motion, that is, any angle of 360 degrees, or 360 degrees of motion, depends on whether it is one or 1/1000 degrees

Q:CNC machine tools work surface milling a hole, do you know what method to repair it?

Milling a plate thickness equal to the pit depth, and then cut into the pit like shape, to fill the pit after welding, welding stop, to avoid overheating deformation table (not water cooling fan, available) welding and then hand electric tools removed, if you worry about the rough grinding, precision ruler while for the light inspection while slowly grinding.

Q:Longmen milling machine table can only move in one direction, what is the reason?

First of all, consider whether or not the stroke of a certain direction has reached the limit. Use the handle to move the table to the middle. Do not pull aside in any direction.If in the middle, still can not move, repair it!Touching the limit switch is the easiest way to say what you're saying!

Q:What is the advantage of hydraulic automatic transmission of grinding machine table?

Its advantage is compared with the mechanical drive system:1. small vibration.2. stepless speed change can be achieved.3., smooth movement, low noise.Working principle: the composition and working principle of the hydraulic transmission system of the simple grinding machine. The motor drives the hydraulic pump to absorb oil from the tank, and the hydraulic pump converts the mechanical energy of the motor to the pressure energy of the liquid. Hydraulic medium through the pipeline through the throttle valve and reversing valve into the hydraulic cylinder left chamber, to promote the piston to move the table to the right, the hydraulic cylinder to the right cavity of the hydraulic medium discharged by reversing valve flow back to the tank. After reversing the valve, the hydraulic medium enters the right chamber of the hydraulic cylinder, so that the piston moves left and pushes the worktable to move backwards. Changing the opening of the throttle valve can adjust the speed of the hydraulic cylinder. The pressure of the hydraulic system can be adjusted by overflow valve. In drawing the hydraulic system diagram, for the sake of simplification, the prescribed symbols are used to represent the hydraulic components, which are called functional symbols.

Q:What is the height of the press table from the ground?

It's not absolute! Because this is also related to your mold, generally large tonnage of about 70~80CM on the line, small tonnage can be slightly high, such as solid point mold, the best in the operating surface in the 80CM for the best.

Q:How do you install the fixtures on the milling machine table?

Just press the T bolt and the platen. The general milling machine uses M14 bolts

Q:How can the anti-static worktable be earthed?

According to specifications, wires shall be attached to conductive metal posts that are directly hit on the soil.

Q:What is the difference in function between the indexing table and the turret of NC machine tools?

The difference between indexing table and the rotary table CNC machine tool is that it according to the processing requirements of the workpiece rotate to the required angle, has reached the purpose of processing different surface, it cannot achieve circular feed movement, so the structure of two different

Q:In the hotel, a table called the cooker, the cooker is what to do with it?

Cooker. Just take the plate. To serve the fried dishes. To help master handyman. In fact, they are right

Q:What is the kn table

Ha, Taobao sellers used to trade, change prices, delivery, customer chat, with the first Oh!