PVC Pipe ASTM, AS,BS,ISO Made in China on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
pvc pipe for water drainage
1.Specification of pvc pipe:40mm-400mm
2.Thickness of pvc pipe:1.2mm-7.0mm
3.ISO certified.
Properties of pvc pipes:
1. Material: pvc pipe unplasticized polyvinyl chloride
2. Standard: GB, ISO9001, ISO14001
3. Color: white pvc pipe, grey pvc pipe , etc.
4. Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5. Vicat Softening Temperature, (C) >=79
6. Longitudinal Reversion, %, 150(C) <=5
7. Dichloromethane Resistance Test: No attack
8. Falling Weight Impact Test, TIR, %, 0(C) <=10
9. Tensile Yield Strength, Mpa >=40
10. Fitness of Water Tightness Test: No Leakage
11. Fitness of Air Tightness Test: No Leakage
Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
Application of pvc pipes:
1) Structure Engineering, home water supply and drainage |
Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | |||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | ||
φ20 | 20*2.3 | 20*2.0 | ||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | |||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | ||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | |||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | ||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | |
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | |
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | |
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | |
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | |
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | |
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | |
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | |
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | |
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | ||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | ||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | ||||
- Q:The newly purchased natural rubber tube is too large. How can it be removed?
- When rubber is peculiar, it can be scrubbed by hydrogen peroxide. After drying, the odor will disappear. Or with waste tea sent to rubber products, tea has the role of adsorption odor.
- Q:Is the electric water heater well connected with the metal hose?
- For electric water heater, now the industry is required to use PPR pipe to its inlet and outlet for welding, on the one hand, long service life, can effectively prevent the water heater inlet and outlet leakage;
- Q:What is a rubber core pulling method?
- Hose core pulling for broken line and curve type pore channels, in addition to leaving the grouting hole and exhaust hole should also set the urinary bleeding hole, hole curve (line) to stay in the top hole, with the method of grouting hole.
- Q:The pipe of the gas water heater is buried in the wall. It is made of nylon tube and rubber tube. Is it possible to use rubber tube?
- After so many years of consulting, you are the first to ask the hose through the wall. In real life, there are many hoses that go through walls.
- Q:HDPE double wall corrugated pipe joint shall be made of elastic sealing rubber ring and socket joint interface. What are the requirements for rubber ring joint?
- The interface method should be carried out according to the following procedures: DN400 pipeline and below, by a man with a cotton rope hook is installed pipe socket, the other one with a long lever oblique insertion based cross baffle against the tube end of the center position, and then forced the tube slowly into after the installation of HDPE double wall corrugated pipe the pipe socket to a predetermined position; more than two sets of DN400 pipeline by hand hoist will pull in pipe section. When the interface is closed, the spanner on both sides of the pipe section shall be pulled synchronously, so that the rubber sealing ring is properly positioned and is not distorted or not falling off.
- Q:Flex rubber joint installation skills, what are the materials of rubber soft joint?
- Specification for installation of flexible rubber joints:Flexible rubber joints, piping construction, it is necessary to make it in a natural situation, not artificial products in the equipment, artificial deformation of the goods. When the pipeline medium for acid, oil, high temperature and other special information, should be higher than the pipe pressure, a gear of the joint.
- Q:The rubber is sheathed on a metal cylinder. How should they be connected?
- If you describe it, it is recommended that a soft binder such as 704 silicone gel will be used to prevent shock absorption and separation. Metal surface to rust treatment, clean can be coated adhesive, rubber cover surface is best polished, degreasing treatment effect is good!
- Q:What is the rubber sleeve flange connection sleeve?
- Soft rubber joints commonly known as flexible rubber joint, its products are widely used in water, electricity, chemical industry, ship system, the main performance of high pressure resistance, good elasticity (axial, transverse and angular displacement) noise, shock, light weight, convenient installation, flexible use, easy disassembly and maintenance, with acid resistance, oil etc.. The product can be automatically extended during natural weather changes in use. The structure of material by dip outside glue nylon cord cloth with high strength and aging resistance of polar rubber material. In order to prevent the product from shrinking naturally in the long run and to reduce the aging and cracking, the netted steel wire is used for multi body protection.
- Q:What kind of rubber hose does not leak the smell of liquefied gas?
- The advantages of using stainless steel corrugated hose are first strength, long life and durability, and the cracks in the rubber tube and the bite of the rat in the past are obviously not appearing on the stainless steel bellows.
- Q:Flexible rubber joints. What do they mean by flexing?
- Stainless steel bellows are not a kind of rubber joint.Flexure generally means that it can be bent repeatedly.The rubber joint mainly plays the axial and angular compensation displacement, and withstands the mechanical vibration, protects the pipeline not to burst.Stainless steel bellows can also be flexible, but the performance of vibration proof is better than that of rubber joints. If the requirements of the engineering drawings are rubber joints, it is better to be careful. Don't change it indiscriminately. Otherwise, the service life will be affected
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Pipe ASTM, AS,BS,ISO Made in China on Sale
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords