Q:What is the shower room industry?

Provide space-based semi-service industry

Q:Shower room of the thickness of the retaining bar to be appropriate ah?

In general, the practice of installing dry and wet partitions in the bathroom with glass partition, you can slide, in the glass below the installation of 2 cm thick stone on the line; there are hanging curtains wet and dry partition, this situation can be done 3-5 Cm, as well as in the bathroom to install the shower room, this will not have to install stone. The fundamental purpose of the installation of stone is to prevent the flow of water to the door side of the back. General mud workers in the bathroom level is done when the slope, there should be water to the direction of leakage to stay. The ground and then install the stone retaining strip can effectively prevent the water when the splash of scattered water, this situation, the installation thickness of about 2 cm on the right.

Q:Our family ready to install the German legislation, in order to safely add money to the middle of the middle of the shower of the partition, the results of yesterday's manufacturers call that we can not choose the type of plastic. Manufacturers do not do. 1, the store can also be coated, I would like to ask, plastic and plastic film that is more secure? How do I feel that the sandwich is safer, a square plus more than 200, a film and a plastic price. 2, in the scheduled ..

If you pay the deposit, that manufacturers breach of contract, to return double deposit, if it is a deposit, that manufacturers can only pay the money you pay back, covered glass is safe, if it is a pattern, that glass The edge must be handled well to ensure that moisture does not affect the pattern leading to discoloration

Q:Is there a shower room in the countryside?

As long as the bathroom space conditions permit, can be used

Q:What is the material of the shower room

The retaining strip is dominated by artificial stone. Do not have to be buried, such as paste the floor after the installation, the bottom of the glass can be made with plastic, easy to install. The future if you want to change is also simple, do not have to knock off the floor. If the pre-buy, one to install more trouble, and have to book earlier, and secondly if you want to change the shower room over two years is also too much trouble. Generally do not use marble, advertised is the natural marble are generally false, one bad cut, and secondly bad to do modeling, especially some of the retaining strip is with curvature, can only do man-made stone, artificial stone through Do mold, style more, the color is also optional, the effect is better. Also useful SMC material, resin and so on. The effect is no man-made stone good.

Q:Because the top of a window is only about 80 cm, I was wrong to do the partition

What is the relationship between the size of a shower room it; to solve the life must be the main, do not have to consider other too much. Want to cut off the course of course more simple, relatively thin glass, in addition to the root, as long as the above can be separated from the sight of the purpose of the line can be. Please consult the site staff will not have too much problem.

Q:Shower room glass glue mold point how to remove?

Shower room glass gelatin point is brown algae, is a very strong vitality of the bacteria, the way of breeding the mold is divergent spores, then we can use bleach to clean these mildew. Use bleach Note: Use bleach should be handled with care because bleach is irritating to mucous membranes, skin and respiratory tracts, heat and light will decompose and easily react chemically with other substances. Improper use of bleach will affect its bactericidal function, and even cause accidents, threatening health. Excessive use of bleach or the use of excessive concentrations of bleach, will produce toxic substances pollute the environment, destroying the ecology. Clean the glass paste with bleach 1, to bleach the concentration of sodium hypochlorite to 5.25% to calculate the adjustment method is as follows, 1: 99 dilution of household bleach (10 ml of bleach mixed with 1 liter of water), can be used for general household cleaning. 1:49 Dilute household bleach (mixed with 10 ml of bleach in 0.5 liter of clear water) for disinfecting surfaces or objects with vomit, excreta, secretions or blood. 2, if the use of bleach in the concentration of sodium hypochlorite higher or lower than 5.25%, the components used will be adjusted accordingly. Calculation method: bleach water content multiple = 5.25 ÷ bleach water sodium hypochlorite concentration. Use the spoon and the measuring cup to accurately measure the amount of bleach required. 3, disinfection of finished items, should be washed with water and dry. After disinfection, the cleaning equipment immersed in dilution bleach for 30 minutes, rinse with water before they can be used again. Finally wash your hands with a clean towel or wipe your hands with a disposable paper towel.

Q:What is the main choice of the shower room? Is it good for the Furui shower room?

1, choose the brand: the brand of the shower room, because the shower room is a non-standard manufacturing services products, if there is no brand awareness, will not pay attention to the shower room of the election material manufacturing quality, do not care about after-sales service. 2, accessories material: a, the glass should be safe steel car-grade glass, high permeability and no steel processing heat pattern as well. Glass to Foshan Jinyao Hua's car-grade glass is best, Jin Yaohua factory tempered glass on the code, you can find in the Jinyao Hua website is genuine. B, aluminum if it is miscellaneous aluminum, brittle. It should be selected aluminum wall thickness is enough (1.2mm above), the surface of the miscellaneous points for the better; C, all the hardware accessories. Should choose stainless steel, with high precision as well. 3, waterproof treatment: shower room each site, especially the activities of the door and the fixed fan three sides need strict water treatment, no waterproof tape treatment, relying on glass overlap waterproof times. 4, shower room overall structure of the rigorous scientific:

Q:Shower how to install ah, mainly asked how to set up hot and cold water pipe joints ah

1. The first step should be for the installation of the basin. For the installation of the basin, it is important that the water in the bottom basin is very important. If you keep the water, then the installation will have a great impact. At the same time the bottom basin and pipe connection, pay attention to solid, to prevent water leakage. Hose, you can adjust the distance as needed. 2. Use water to check to ensure the accuracy of the installation, and to ensure that the water can flow normally. And then followed by the drilling operation, used to fix the wall of the aluminum material. 3. Then into the fixed particles and other ingredients, and then the aluminum bar is fixed above the wall, and then will be used to fix the glass material in the bottom basin drilling place. 4. Drill a hole in the fixed glass, then install the mount, and then connect the jacking. Then it is for the installation of the shelves. We know that the shower room if you do not put the shelf, then go into the bath when the replacement of clothing is not good to put. 5. Install the activities of the door, you can save space, and push and pull will be more convenient. Then do good waterproof work between the glass. With glass glue to seal the need to seal the place is also sealed. 6. Then for the installation of the shower room to check, to ensure that the installation of the shower room waterproof normal, smooth drainage, can be used normally. If there is a certain lack of water and drainage, pay attention to the renovation, while the screw and the like to tighten out. And then remember to wipe the shower room with a rag.

Q:What is the glass thickness of the shower room? Is it 6MM m? Or the thicker the better?

Door glass generally do 6mm thick (absolute strength enough), fixed glass to do 8mm