Packaging & Delivery
|Packaging Detail:||1pcs/box,4 boxes/carton,Box Size:23.5*17*38.5cm,Carton Size:50*35*41.5cm, GW/NW:6.5/7.5KGS|
|Delivery Detail:||30 days|
Table top slot machine
1.Saving box size:20*15*37.5cm
2.We passed ICTI,GSV
Table top slot machine
Power:2 pcs AA batteries
1.Drop coin to the slot in the front of machine.(without coin you also can enjoy the game)
2.Pull the handle on the right side,and loose immediately,handle reset.
3.Wheel starts to run,and stop random within 5-10 seconds.
4.If you hit a winner,a bell will sound,the win light will flash,and the jackpot will pay out automatically.(with out batteries,the bell won't sound
and the light won't flash).
5.Of course,you can drop coins to the slot at the back of machine for saving change.
- Q:Planer Sliding Stroke Length Adjustment Method
- In the planing, the length of the stroke should generally be 30 ~ 40mm longer than the length of the parting surface. The stroke length adjustment method of the ram is to change the eccentricity distance of the eccentric slider on the swing gear, the greater the eccentricity,
- Q:Introduction of gantry planer
- The beam is generally equipped with two vertical turret, knife carriage can be rotated in the vertical plane of an angle, and along the beam for lateral feed movement;
- Q:Inserted into the plug, modulation parts, with what knife, I now use is a cobalt-containing knife
- To use these tools, simply pull it out of the fold of the blade and use it.
- Q:Gantry planer lift knife coil and diode in parallel what role? Lift knife coil always burn, there is no good way?
- the coil if the original burn, should check whether the working voltage is the coil rated voltage.
- Q:The difference between broaching and boring
- The reciprocating motion of the cutter with the ramps in the vertical direction is the main movement. The intermittent motion of the workpiece in the transverse direction and the circumferential direction of the workpiece is the feed movement.
- Q:Gantry planer working principle
- Mainly used for heavy workpiece in a single installation planing, milling and grinding plane and other processing.
- Q:What is the general use of cutting tools
- The number of re-grinding of the turning tool is long and the service life is long, but the design and manufacture of the tool are complicated and the cost is high. Therefore, it is mainly used in the mass production of small parts.
- Q:The difference between the slot and the broaching machine, and when is it good?
- Inserting the keyway to be processed slowly into the broaching machine
- Q:What is the working principle of the lower planer?
- What is the difference between faucet and tiger?
- Q:Advantages and Disadvantages of Swinging Guide Mechanism
- The swing mechanism of the crank mechanism converts the rotary motion of the crank into a reciprocating swing of the guide rod
Our group mainly produces machines for plywood production line and specialized in many ranges of woodworking machines, such as veneer slicers, CNC rotary lathes, multi-blade ripsaws, panel saws, four-side moulders, and others.Our products have been widely sold to dozens of countries and regions in Asia, Europe, America and Africa.Our goal has always been to provide only the highest quality equipment and services.
1. Manufacturer Overview
|Annual Output Value
||US$2.5 Million - US$5 Million
||Model Enterprise for Managemnt
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
||English, Chinese, Spanish, Russian
||Below 1,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range