LED Lighting T5 Tube CE RoHS TUV ETL t5 Bracket Lamp
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 100000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
8 Specification:
Material | Aluminium + PC cover |
Body size | 600mm |
Light quantity | SMD2835/96Pcs |
Power Installation | Power external in the tube |
Work voltage | AC100-240V |
Power consumption | 10w |
Power factor | >0.92 |
Work temperature | -20°C~+50°C |
beam angle | 120° |
Color rendering | >80ra |
Color temperature | 2700-7200k |
Luminous flux | 950Lm |
Light-to-Electric conversion yield | 95% |
Life span | 50000hrs |
Feature:
1.Magnetic&electronic ballast compatible
2.No need to remove starter or ballast.
3.No professional electrician needed
4.Easy for installation
5.No labor cost, maintenance free
6. instant start.
7. No UV, NO mecury, healthy for human body
8.Power consumption:24w
9.Certificate:CE,RoHS,FCC,PSE,TUV,UL
10.Low power consumption
11.3 years warranty
10.No fluorescent flickering
11.No RF interference, no buzzing noise.
12.No hazard of mercury or lead entering the environment
13.Easy in stallation
Description:
1.Living room, bedroom,kitchen, washroom;
2.School, university, hospital,hotel;
3.Conference,meeting room, show room,showcase;
4.Commercial complexes;
5.Factory,plant,warehouse,office;
6.Supermarket,department store.
Images:
FAQ:
Q: Are you manufacturer of trading company?
A: Yes.
- Q: The two ballast that originally was electric inductance towed three ordinary fluorescent lamps, now changed to LED fluorescent lamp tube, have influence?
- The impact is certain, and it wastes electricity. It is expected to waste about 12W of power, and if it is powered by a capacitor, it will also greatly affect the brightness.
- Q: The ordinary fluorescent lamp in the home is on the Internet say to remove the hui, the ballast part is short, put on LED lamp tube, can connect to change 3 lamp tube not bright?
- The wind tube of the ballast is usually not flashing when it is opened, and the life span is basically one year
- Q: Fluorescent lamp double lamp tube wiring method
- Leds that do not normally require special orders are mostly built with built-in power, which is directly available. Most can only need to remove the starter on the traditional stent line (is a cylinder bracket highlighted below) mount tubes can be used, if not yet so could you use the stent is a relatively new "electronic" will be a little trouble need you open the stents to get inside the ballast also take off to the inside of the line directly connected to the utility, LED bulb is directly at the mains. Of course, if you understand the circuit and you're not afraid of trouble, it's advisable to remove the "regenerator", because the "ballast" is a power drain.
- Q: What is the difference between a radar sensor and an infrared LED fluorescent lamp?
- The difference between radar sensing and infrared LED fluorescent lamp tube is as follows: Radar sensor LED fluorescent lamp: induction distance, wide Angle, no dead zone, can penetrate glass and thin floor, not influenced by environmental temperature dust etc, under the condition of 37 degrees, not shorten the induction distance, fast response and good concealment.
- Q: What is the flux of the general led daylight light
- And you can do that, and you're going to have 7, 5lm per watt. If it's a 10W light, you're 75 * 10 = 750LM.And you can do that, and you're going to have 7, 5lm per watt. If it's a 10W light, you're 75 * 10 = 750LM.
- Q: The energy-saving device installed on an old-fashioned daylight lamp is similar to the lighting in the university library, where lights are illuminated and the lights go out
- Heilongjiang wanfang electric equipment co., LTD. Is one of the places where you can check the Internet for sale
- Q: The ledt8 lamp is used for the light bulb
- LED daylight bulbs are currently best used in the fourth generation, 2835, with long life and good lighting, but relatively high cost. The second is the third generation, 3014. The worst is the second generation 3528 light beads, the first straw hats. Many merchants use 3014 to say 2835 lamp bead, want to be careful!
- Q: How does the lamp line connect
- The one that used to be in the early part of the world, which requires the regenerator to cooperate with the light, is an inductance ballast, and the fluorescent tube now needs to glow without the regenerator. The ballast that doesn't need a regenerator is an electronic ballast. Ask to sell tubes of the owner, they all know and electronic ballast inductance ballasts, now basically eliminated inductance ballasts, everybody understand the electronic ballast is enough. If it is an old lamp, it will meet the inductive ballast. The lamp tube has two feet on each side, and the left and right sides are four feet
- Q: Is the normal daylight tube replaced by an LED line
- Step 1: use a screwdriver and a pliers to disconnect the ballast from the wire. But my home is the sun lamp base of zhengtai, the quality is too good, it took 10 years. I didn't even get down to the ballast, which was stuck in a full thick iron base, so I disconnected the wire. The wire that disconnects from the ballast is sure to have two heads, just to disconnect the connection. There is a lot of direct skewers of black tape, some of which use that connector and screw the two wires together. It's the same thing. This is the connector that is used in this case. Disconnect the regenerator, remove the wire and then rewire the two broken wires together and attach the black tape (which is the insulating tape). Put the base back to the original. Install the fluorescent tube, and remember to place the head of the European logo on the base of the current. And when you put it in place, it's going to be OK.
- Q: ?The title What is the color temperature of the leds?
- So the light that you're talking about is a little less red than warm, so it's a little less than 3000K, right?
Send your message to us
LED Lighting T5 Tube CE RoHS TUV ETL t5 Bracket Lamp
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 100000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
