1.Description of LED Display with 1m Diameter P6/P10:
1) Brightness adjustment
2) Support for multiple display mode
3) Contrast, brightness adjustment of the entire screen ion of Tube Core
4) The size and style can be customized as the requirements of customers
2.Specification of LED Display with 1m Diameter P6/P10:
Accepting signal:RF,S-Video,RGB,RGBHV,YUV,YC,COMPOSITION etc
Level up degree:pixel≤0.5mm;module<< span="">1mm
Uniformity:pixel and module uniformity brightness
Malfunction dot rate:<< span="">0.0001
Switch power load:5V/40A
Computer display mode:1024×768
Control distance:internet line 100m;single mode fiber:
20km; multi mode fiber:500m
3.LED Display with 1m Diameter P6/P10 Specification:
1.2 Pixel Index
1.3 Technology Specifications
LED type :SMD5050
Screen thickness:cabinet thickness 12cm(Front Maintenance)
4 Power supply
Power: AC220Vor 380V
Max power consumption:1450Wsqm average 550W/sqm
5 Control system
Computer:DELL V230 or similar computer
Control mode:synchronization control
Calibrate Brightness:256level adjust
Control system adopts:DVI+Master card+ Internet line
We have organized several common questions for our clients，may help you sincerely：
①How about your Warranty？
Warranty: 1-Year for the whole light. Warranty is based on correct storage, installation, using and maintenanc
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q:Led display what format can be displayed
- a graphic editing, zoom, scroll, animation and other functions can display a variety of computer information, graphics, images and Two, three-dimensional computer animation, can be superimposed text • broadcast system with multimedia software, you can flexibly enter and broadcast a variety of information • a variety of Chinese fonts and fonts to choose from, but also enter the English, Spanish, French , German, Greek, Russian, Japanese and other languages • There are a variety of ways to broadcast,
- Q:Led display speed how to tune
- All need to display the data are ready, the "send" button to send data, select the need to send the frame and set the starting address, the point can be sent
- Q:IPS screen and LED screen difference
- LED is the backlight, longer life, lower cost, with TN screen you slightly higher performance, LED performance is good, high dynamic contrast. The disadvantage is too bright, a little hurt eyes. Now the mainstream are used LED screen, short response time, suitable for playing games.
- Q:Led display brightness is not enough because of what are the reasons
- LED display used for some time, the screen sometimes becomes very dark, which is what we usually say LED dark screen phenomenon. First of all, you can check the power cord or power supply is a problem, poor contact, data line quality difference will have this situation.
- Q:Led display point density is what it means
- Is the number of units per area LED, pay attention to if the RGB tube is three, then only one
- Q:Production of LED display the basic raw materials which ah?
- LED display (LED panel): LED is light emitting diode, LED abbreviation, referred to as LED. It is a kind of control by the semiconductor light-emitting diode display, the approximate look is by a lot of usually red light-emitting diodes, light off the light to show the characters. Used to display text, graphics, images, animation, market, video, video signals and other information display screen.
- Q:Led display and led lighting What is the difference?
- D display and led lighting are two LED as a light source. The main difference between the two is: to achieve different functions. Led display is the use of dot matrix module, through the red, green and blue combination of three colors using the control system to achieve text, video, pictures and other content display. Led lighting is the main pursuit of brightness and white balance.
- Q:LED outdoor display which part of the composition
- Outdoor, LED display, as the future of outdoor display advertising media new favorite, widely used in finance, taxation, industry and commerce, post and telecommunications, sports, advertising, factories and mines enterprises, transportation, education systems, stations, docks, airports, shopping malls, hospitals,
- Q:LED display more than the size of the area must be 380v
- LED display itself only need low-voltage DC power supply, whether it is 380V or 220V need to go through the buck and rectifier, which is the screen does not matter. Whether it is to use 380V or 220V depends entirely on the load balance of the power grid considerations, which depends not only on the size of the display, but also on the local grid capacity. In general, LED is weak devices, even if the display area and then large, the total power is also less than where to go, so you can use 220V single-phase power supply, but the power supply cable cross-sectional area to be larger, but the power circuit Much simpler.
- Q:LED display applications are what
- LED display application range is very broad, can be divided into the following categories, but does not include all. Led outdoor media, stage rental, cluster release, traffic induction, indoor small spacing, point by point correction and so on. Which includes the meeting room we usually see, the station airport display, advertising display, traffic information display, performance, exhibition, etc.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range