Q:What are the pipes in the air conditioner?

General automotive air conditioning work principle: compressor exhaust, condenser, liquid storage dryer, expansion valve, evaporator, compressor suctionEach of the arrows (except the expansion valve to the evaporator) represents an air conditioning line. Some of them are rubber tubes and some are made of metal tubes.

Q:Is the rubber pipe joint installed in the middle of the pipe and pump to absorb the shock?

Control the noise produced by parts of machinery, equipment, and equipment. The pump foundation of the new pump house should adopt heavy weight to prevent vibration from producing noise. Vibration isolation should be set up with rubber vibration isolating pads to reduce vibration noise. Each pump unit shall be provided with a foundation to prevent resonance. Use "soft" connection as far as possible in the suction pipe and pressure pipe of the pump. Periodic maintenance problems, such as packing leakage, equipment parts loose, serious wear and tear of equipment parts, mechanical vibration and so on, should be repaired in time, thereby reducing noise.

Q:Can the rubber hose for the LPG cooker and gas cooker be general?

The characteristics of the rubber tube has physiological inertia, UV resistance, ozone resistance, resistance to high temperature (-80 to 300), high transparency, strong resilience, resistant to compression permanent deformation, oil resistance, impact resistance, acid and alkali resistance, wear resistance, flame resistance, voltage, conductive properties.

Q:How to determine the parker381 hose joint?

Parker 381 series hose comes with Parker 43 series hose connector. Because the type, material, and surface treatment of hose joints are indistinguishable from the naked eye, these factors directly affect the quality of the hose assembly:1., if the factory internal judgments, according to Parker provided geometric parameters to determine;2., if purchased on the market, it is best to choose Parker authorized dealer (Parker authorized dealer has Parker's power of attorney);

Q:What is the principle of communicating devices? What if the rubber tube is used as a connecting device to change the water for the fish?

The principle of siphon principle has long been known by the Chinese people for the discovery and application of siphon principle. Hong Straw manufacturing principle application of siphon, in ancient China called "sub", "partial" and "siphon" or "siphon". At the end of the Eastern Han Dynasty, thirsty for irrigation appeared. In southwest minority with a long curved bamboo festival to drink, but also the application of the physical phenomenon of siphon. The song "Ceng Gongliang Wujing Zongyao", making the Straw useful bamboo rainbow mountains spring bring down the record barrier. China ancient also uses siphon principle is made. A fire extinguisher is a necessary war in the city. The Song Dynasty Su Shi "dongpozhilin" Volume 4, recorded by the Sichuan salt brine pump suction to the ground. The book contains: the bamboo tube, no bottom orifices on the leather hanging a few inches out of the water, gas, breathing and the opening and closing of a cylinder caused by water bucket number. "Using the method of pump water to irrigate seedlings induced in the Ming Dynasty also talked about the" tree "in the book, the ancient China siphon principle is also discussed. During the northern and Southern Dynasties, the book "Yin Zi nine drugs", said: "the bottle stored two orifices, the water to the reality of the" pour "; closed a water, the lid (gas) does not rise, then (water) does not drop. A well is full of water, but it does not drop

Q:Is there a tolerance standard for rubber tubes in length?

Generally speaking, the requirements of diameter and wall thickness are more stringent.The diameter is usually the inner diameter of the hose.Generally speaking, the length is not high, and the unwritten rule for foreigners is "+ 2~3mm".

Q:The difference between silicone tube and PVC tube

PVC pipe is made of polyvinyl chloride resin and stabilizer and lubricant with injection molding machine with hot extrusion molding, main performance, electrical insulation; chemical stability; self extinguished; low water absorption; easy adhesion, high resistant to high temperature of about 40 degrees. Main appliances, industrial gases, liquid transportation, household sewer pipes, water pipes and so on. Environmental issues: plasticizer, antioxidant and other added accessories are toxic, daily in PVC plasticizer, mainly using terephthalic acid two butyl phthalate two formic acid two ester etc., these chemicals are toxic.

Q:The main features of Linatex rubber tube or what are the characteristics?

The types and characteristics of Linatex rubber tube:Linatex:95% pure natural rubber is made of fresh latex and processed by liquid phase process. Excellent resistance to wet grinding, super elongation, high strength, resilience and tensile strength.Linard 60: silicon reinforced natural rubber, with high wear resistance, high resilience, cutting resistance, tear resistance and so on.Linatrile: silicone reinforced rubber. It has the properties of wear resistance, oil resistance, aging resistance, fatigue resistance and good air tightness.

Q:How to determine the tensile strength of GB rubber joint?

The tensile strength of adhesive joints that can resist the ultimate capacity rubber tensile failure, tensile test piece refers to fracture when the unit section of the load, also known as tensile strength, tensile strength, unit MPa (MPa). Tensile strength is generally used as the main physical and mechanical standard in rubber joint industry.

Q:Acid burette and how to distinguish the basic buret

Acid burette glass valve cock, the basic buret is latex tube with glass balls