Hot Selling Factory Directly Flexible Led Strip 5050 Using For Decoration
- Ref Price:
-
$1.37 - 4.46
/ roll
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 30000 Rolls Per Week roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
Factory hot selling 5050 RGB led flexible strip light with remote controller is a new kind of energy-saving lamps to replace traditional incandescent bulbs. Traditional incandescent lamp (tungsten lamp) owns some distinguished features like high energy consumption, short life, which are out of date and gradually been forbidden by most of countries. LED light has become the new green and perfect lighting choice in the aspects luminous principle, energy-saving and environmental protection.
A set of three LED in series connection, between the groups in parallel
Specification:
| Product Name | LED Strips | |
| Model No. | LW-A0016 | |
| Lamp Total Power | 60W±10% | |
| LED Light Source | 60PCS (SMD5050)/M | |
| IP classification: | IP65 | |
| Product Dimension (mm) | 5000*10*2.3mm | |
| Lamp Rated Luminous Flux @ 20MA | 16-18LM/pcs or 18-20LM/pcs | |
| Cuttable: | 3 LEDs per 5MM | |
| Color: | R,Y,B,G,CW,WW,PW | |
| PCB color: | black /white/brown | |
| CRI | > 70 Ra or >80 Ra | |
| Life time | > 50,000hrs | |
| Input voltage | DC12V or DC24V | |
| Operating temperature: | .-30°C to +60°C | |
Features:
1.PCB color: White/Brown/Black
2.Power 5050 TOP SMD LED have high brightness such as 15~18 lm/18~21 lm per LED .
3.Available color: R,Y,B,G,CW,WW,PW, RGB
4.Input voltage: DC12V or DC24V
5.DC12V strip can be cut every 3pcs of LED; DC24V strip can be cut every 6pcs LED.
6.Different connector easy for you connect the cut part.Can make the connector on transformer to sure easy connect and totally waterproof.
7.3M adhersive tape back easy for instal.
8.Silicone hollow tube & Silicone glue good for waterproof, and keep it Anti-oxidation, anti-UV radiation and won‘t change color after long time use .
9.Vivid color , safety (No glass in it), long life time, good price
10.OEM/ODM are welcome. Sell for the wholesaler or supermarket.
11.Operating temperature: -30°C to +60°C
12.Have waterproof transformer, waterproof controller, waterproof connector make your whole project waterproof.
13.Waterproof standard: IP65, cover with Silicone glue, IP67: Put in Silicone tube, IP68: Put in Silicone tube after cover with glue.
14.Silicone material offers good heat or cold resistance and is not easily broken ..
15.vibration resistant/ good for High and low temperature.
16.5m/reel in anti-static bag, good carton box for long distance shipment.
17.Make the special installation map for your special project.
18.Light fades: 1000 hours in front of the light fades will be bigger. 3-3.5 ten thousand hours in the back where it will not have any bad light much change in the use of 40,000 hours began to decline after the light fades.
Application
It is applied extensively in contour lighting,sign lighting,etc.
Customized options
Customize your strip light by picture or by technical datas.
Packing & Delivery
Package:
plastic bag intside, cartons outside
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
Air freight | 3-10 business days |
By Sea | 30-40 business days |
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: How much is the price of LED light box lamp?
- LED lamp belt price is according to its quality to evaluate, poor quality a few dollars a meter, good quality more than ten yuan a meter!
- Q: The problem of residual light in LED lamp after power failure
- The power line can be switched to zero. The main switch is off and caused by a zero line.
- Q: How to install the car LED lamp belt?
- When the LED light belt device, the ordinary put in the lamp slot, can be straight, also can use string or fine wire fixed. For external or vertical installation, required a clip and a tail plug. The original clip is fully illuminated and it is better to put waterproof glass in the stopper and plug at the end of the assembly so that the waterproof performance will be better.
- Q: Why can't the LED light band be broken from the fracture, but it can be light from the middle?
- In order to ensure the brightness of the LEDs in the LED light band, the diode is usually connected in series. There are two possible reasons for the phenomenon:1) when one of the diodes is broken, the entire LED light band will not turn on;2] more diodes in series require a higher power supply voltage, and when the voltage is low, the entire led band will not turn on.
- Q: LED lights with 0-10V dimming when flashing what reason?
- The main reason for stroboscopic is frequency, and nothing to do with itYou can't adjust the voltage directly by using the common transformer to adjust the voltageThe best dimming method for LED is the PWM, which is actually frequency modulatedLED is not realistic to want to be completely strobe, but the average frequency is above 100HZ, you can't feel the strobe completelyYou use a transformer to tune, the supply or the city's standard 50HZ frequency, 50HZ must have strobe, but some of the lights may not be too obvious, and some obviously.So, if you want to sit with LED lamp dimming, recommended to buy a dimmer, the price may be relatively high, to hundreds of yuan, if your light load is not large, buy a large manufacturer of the wireless light, with remote control, an estimated more than 200.
- Q: How can the LED flat band be fixed on the outer wall corner?
- How to install the LED corner lamp, there has been a guest asked us, in fact, this is a very simple thing, but because we are professional will think so, and our customers, but not necessarily think so, there are still many do not understand, because of fears that the equipment is not up, so in with us really beautiful Taobao lighting factory outlets, customer service communication, many guests said, temporarily buy a sample back, see fit.
- Q: What are the uses of an LED lamp?
- A long time ago, lights were usually used in parks, buildings, overpasses, signboards, interior decorations, neon lights, or beauty. Now the lamp with LED lamp do, so called LED lamp belt. The lamp belt can be used for external use or indoor use.
- Q: How many meters does the LED flash band need? A controller?
- Different LED lights LED number is not the same, the power will not be the same, the general number of led more, the whole LED light belt power is greater, the controller can bear the length will become shorter!Generally speaking, if the number of LED in your Flash belt is 60, 0.2w/led., then the meter is 12W, and the 10 meter is 120W.The controller is used for receiving signals, and the number of meters does not matter. As long as there is sufficient switching power supply to the lamp band, it is possible to meet the power requirements of the parallel light band. Or, in a certain range of load, you can then connect the signal amplifier, you can use a controller to connect the effect of numerous lights!In addition, the general controller will be equipped with wireless remote control, remote control can control the scope of the band is the main factor to limit the length of the band!
- Q: What should I pay attention to when installing LED soft light belt?
- Notes on installation of LED lamp band:Compared with the traditional LED lamp with lighting, or are in the development of new products, so many consumers on how to install the LED lamp belt is not very understanding, in the installation process may occur in a variety of problems led lights with LED can not be used, the correct use and installation of LED lights, LED lights with prolonged service life. We also need to understand the problem. LED lamp belt at the time of installation, must be in accordance with the concise, use the correct method to carry out the installation, if excessive distortion or incorrect use of the installation method, are easy to light with losses, reduce the lamp with the use of time, is not conducive to the maintenance of the lights. Provide you with the following details should be noted when installing the light belt:
- Q: 5730led hard lamp, with one meter long and 72 beads, what is the power?
- This is actually very difficult to calculate, because the current and voltage using the actual do not know, if the maximum value is 5730, each 0.5W, current to 150MA, when using high pressure constant current drive, the 72 is 36W
Send your message to us
Hot Selling Factory Directly Flexible Led Strip 5050 Using For Decoration
- Ref Price:
-
$1.37 - 4.46
/ roll
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 30000 Rolls Per Week roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
