Q:You can connect inside the pump and valve

Pump and valve should be installed between the distance, too close, too far, will cause damage to the ball valve. The flange is usually used on the pump. Valve can be connected with a pipe with screw pipe, a head welding flange, and the flange is directly connected with the water pump. Super - Electronic Commerce

Q:What does 1000WOG mean on a ball screw valve?

It's also a standard, huh?

Q:What domestic PPR ball valve can withstand acid and alkali?

Yue Yue PPR ball valve products are made of pure raw materials, mainly used in water supply and other plastic piping systems for industrial use. You can rest assured that the use of Hong Yue products

Q:About the characters on the ball valve (what do s and O mean?)

That's almost what it means. To be exact, S is SHUT and O is OPEN

Q:Hard sealing ball valve, what method can calculate the leakage? How much is grade 4? How much is grade 5? How much is level 6? For example: how many DN150 seals are 5 ml?

Valve leakage level is actually the valve sealing class. There are two kinds of GB and American Standard.

Q:What is the difference between ball valve and plug valve?

Plug valves are closed or plunger shaped rotary valve, through the rotation of 90 degrees to make the valve plug on the mouth of the channel with the valve on the mouth of the same or separated, to achieve a valve opening or closing. Plug valve plug shape can be cylindrical or conical. In the cylindrical valve plug, the channel is generally rectangular; in the tapered valve plug, the channel is trapezoidal. These shapes make the structure of the plug valve lighter, but at the same time a certain loss. Plug valves are most suitable for cutting and turning on the medium and for shunting applications, but in accordance with the applicable nature and sealing surface erosion resistance, sometimes also used for throttling. As the plug seal between the movement with a wipe action, while fully open, you can completely prevent the contact with the flow medium, it is usually also used for suspension with particles of media. Another important feature of the plug valve, it is easy to adapt to multi-channel structure, so that a valve can get two, three, or even four different flow channels. This simplifies the design of the piping system, reduces the amount of valve used, and some connecting fittings needed in the equipment.Plug valves use:Plug valves are widely used in oil production, transportation and refining equipment, but also widely used in petroleum, chemical, chemical, gas, liquefied petroleum gas, HVAC and general industries.

Q:DN20 pressure 6000PSI, one piece of thread on the threaded, full diameter ball valve body length and flow hole to how much?

1, the valve body and the valve cover as a whole bear cavity, must meet the design manual on the minimum wall thickness requirements, at the same time to add corrosion allowance, at the same time calculation, large value as the wall thickness of 2, then according to the height of gate valve diameter, to ensure that the valve in the fully open under the condition, ensure the seal and the valve cover seal gate, so that we can determine the height of

Q:DN20 copper ball valve with large PPR converter connector

What do you see a ball valve, PPR ball valve, ball valve with internal screw threads, ball valves, but if you look at the butt of the ball size, if the ball is 20. The tube is 20, then the 20*1/2 internal thread can be directly on the butt.

Q:What brand of double live catch valve is good?

The best is gold, the sun and the sun! And Dr. water is not bad. What package fifty years are Pihua, generally as long as the master work basic pipe will not be a problem. It's important for the master to do the work

Q:What are the advantages and disadvantages of the two functions of the pneumatic ball valve actuator?

Pneumatic ball valve actuator is divided into double action and single action two modes of work.Working principle of double action mode:When the compressed air enters the middle cavity between the two pistons of the cylinder from the air inlet (2), the two pistons are separated and moved toward the two ends of the cylinder, and the air at the two ends of the air chamber is discharged through the air port (4). At the same time, the two piston rack synchronously drives the output shaft (gear) to rotate in an anticlockwise direction. On the contrary, when the air source pressure passes through the air inlet (4) into the air chamber at the end of the cylinder, the two piston moves toward the middle of the cylinder, and the air in the middle air cavity is discharged through the air port (2). At the same time, the two piston rack synchronously drives the output shaft (gear) to rotate in clockwise direction. (if the piston is mounted in opposite directions and the output shaft rotates in reverse direction, that is, double acting reverse type).