Q:What are the common standards for gate valves?

Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. The following common standards for Fujian Biaoguang valve for valve: design specification: JB/T 7746, API602 JB/T 7746, the length of the structure specification / thread socket factory test and inspection of JB/T1751/GB7306, ANSI: B16.11/B2.1: JB/T 9092, API598 pressure temperature: GB/T 9131, ANSI B16.34, MSS GB/T 12220 product ID: SP25 delivery specification: JB/T 7928

Q:Is the axial force and torque of the wedge gate valve the same?

The sealing performance is good, the gate valve is not easy to be jammed when heated, and is suitable for the parts with frequent switches. B is suitable for steam, high temperature oil and gas medium. C is not suitable for easy coking medium.

Q:What does gate valve do?

The gate (gate valve) is a gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle.Gate valves for Class150 ~ 2500, the working temperature of -29 to 425 DEG C (Tan Gang) or -29 to 500 DEG C (stainless steel) small caliber pipeline, used to cut off or connect the line of medium, use different materials, can be separately applied to water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea etc. a variety of media, the 3 Classification valve according to the different classification methods can be divided into: the parallel gate valve, wedge gate valve, valve lift, rotating rod valve, quick opening and closing valve, reduced valve, flat gate valve etc.. 4, characteristics of fluid resistance is small, applicable pressure, temperature range, medium flow direction is not restricted, good sealing performance

Q:Gate valve, butterfly valve, ball valve advantages and disadvantages? What are the usual valves?

Commonly used valves are: gate valve, globe valve, check valve, ball valve, butterfly valve, safety valve, regulating valve, plug valve and so onValve: valve is closed parts (RAM) vertical movement of the valve in the pipeline along the channel axis, used primarily as a medium cut that open and close use. In general, the valve can not be used as a regulation flow. The utility model can be applied to low temperature pressure, and can also be applied to high temperature and high pressure, and can be made according to different materials of the valve. But the valve is generally not used to transport mud and other media pipeline.Advantages: fluid resistance is small; the opening and closing torque needed by the smaller; can use the ring pipe flow to the two direction in the medium, that is to say the unrestricted flow of medium; the fully open, the sealing surface by the erosion of the working medium is smaller than the cut-off valve; the body has the advantages of simple structure, manufacturing good craft; the structure of relatively short length.Disadvantages: the size and height on the larger required installation space is larger; in the process of opening and closing, a relative friction sealing, friction is large, even scratch phenomenon caused by easily at high temperature; the valve has two sealing surface, to processing, polishing and maintenance of some increase the opening and closing time difficult.

Q:What are the advantages and disadvantages of flat gate valves?

The advantage of flat gate valve is that the flow resistance is small, and the flow resistance is similar to the flow resistance of short valve. The flat gate valve with guide hole is installed on the pipeline and can be directly cleaned with the cleaner. As the gate is sliding on the two seat surface, the flat gate valve can be applied to the medium with suspended particles, and the sealing surface of the flat gate valve is actually positioned automatically. The seat seal surface is not subject to thermal deformation of the valve body. Moreover, even if the valve is closed in cold condition, the thermal elongation of the stem will not cause the seal to be subjected to overload. The length of the structure is much shorter than that of the ball valve, and it is easier to start. Light plate gate valve is more refined, but the effect is exactly the same.

Q:what are their applicable conditions? Advantages and disadvantages?

Butterfly valve is a disc type of open and close parts reciprocating reciprocating about 90 degrees to open, close and adjust the fluid channel of a valve.Advantages: the butterfly valve has the advantages of simple structure, small volume, light weight, material consumption, installation of small size, and torque is small, simple and rapid operation, and also has good flow characteristics of regulation and sealed off, is nearly 10 years the fastest growing valve, high temperature and high pressure, and to large diameter, high sealing function of the direction, long life, good adjusting features and a valve development.Disadvantages: the butterfly valve relative to the gate, ball valve pressure loss is relatively large, it is suitable for pressure loss requirements lax piping system.Under normal circumstances, it is not suitable for high temperature and high pressure pipeline system.Valve is closed parts (valve) moving along the centerline of the valve seat, the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional to, is also very suitable for the regulation of traffic.Advantages: in the process of opening and closing, the friction between the disc and the valve body is smaller than that of the gate valve, so it is wearableThe opening height is generally only 1/4 of the diameter of the seat channel, so it is much smaller than the gate valveGenerally, there is only one sealing surface on the body and disc, so the manufacturing process is good and easy to maintain;Disadvantages: the flow resistance coefficient is relatively large, resulting in pressure lossUnsuitable for large caliber productionThe opening and closing moment is larger and the structure length is longer.

Q:What's the meaning of the gate valve model z41x 16Q?

Gate valve (Z) flange connection (4) wedge type single gate (1) rubber soft seal (X) -16 pressure) (Q)

Q:What is the difference between the copper gate valve and the ordinary material gate valve?!

The material of general gate valve is cast iron, and the copper gate valve should be used in special requirement.

Q:Z45T-10 what kind of material is the gate valve?

JB/T 308 regulation3.7.4 nominal pressure of less than 1.6Mpa gray cast iron valve body material code, in the type of preparation to be omitted.So its body material is gray cast iron, the sealing surface is copper alloy

Q:The main question is, what are the functional differences in which case?

The gate (gate valve) is a gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle gate valve. The direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle.Gate valve advantages: 1, fluid resistance is small,.2, opening and closing more labor-saving,.3, medium flow unrestricted, not disturbed flow, do not reduce pressure,.4, simple shape, structural length is short, manufacturing process is good, a wide range of applicationsValve shortcomings: 1, between the sealing surface is easy to cause erosion and abrasions, maintenance is more difficult,.2, big size, open need some space, opening and closing time is long,.3, the structure is more complex