Detailed Product Description
15W CFL lamp
3)Certification:CE/EMC/ROHS 4)lower consumption
5)OEM is available
Product name: 15w full spiral cfl energy saver bulb// 15w full spiral cfl bulbs (CE/EMC/ROHS/LVD)
Tube Dia.: 9mm
Color Temp.: 2700/4200///6400K
Life Time: 10000h
CRI: more than 80
Lamp size: 45mm*45mm*110mm
15W full spiral energy saving lamps //15W full spiral cfl bulbs // 15W full cfl energy saver bulbs can be customed according your requirements.
Your enquiry will be welcomed and please feel free to contact us!
- Q:About the house lighting problem?
- In accordance with the provisions of the state (design specifications), the winter solstice sunshine time is not less than 1 hours (the bottom of the house window) as standard. With the height of /tan spacing is outside the building to house the cornice Ping (a) during the winter solstice at noon the sun altitude angle around a-. Can also be used: floor height: floor spacing = 1:1.2 ratio calculation.Other relevant: Housing lighting situation is the concern of every owner is very concerned, when new buildings appear around their own houses, we will consider whether their lighting violations.
- Q:The question of the right to light in the neighborhood
- The other party's claim is based on law, but the loss to your home will be compensated by the other party. Article eighty-ninth of the property law of the People's Republic of China shall not violate the state's relevant construction standards and hinder the ventilation, daylighting and sunshine of adjacent buildings....... Ninety-second a rights holder of immovable property for water, drainage, traffic, laying pipelines using adjacent immovable property, should be avoided on the adjacent property rights cause damage; damage, compensation shall be paid.
- Q:In order to have good lighting, the southern hemisphere has the best orientation
- In the northern hemisphere, if the building wants good lighting, it should face southOn the contrary, buildings in the southern hemisphere have to be north facing good lighting
- Q:Indoor lighting is not good, how to make up?
- Poor lighting rooms will appear dark, and a large area of light colored floors, tiles and other decoration materials will be a good improvement of this problem, light colored materials with reflective feeling, can regulate the dull light of the room.Soft lighting makes up for lack of lighting. Some small units will be designed to connect the living room and bedroom or bathroom aisle, and some of the aisle will be far away from the window, which led to poor lighting corridor. Such a channel can usually be adjusted by soft lighting. Corridor is not appropriate, a large number of spotlights, because the effect of the spotlight is to focus on an object, used in the aisle will be too dazzling, if the night through the corridor, open the spotlight, the human eye will be very difficult to adapt.The light sources are arranged in the hallway, the light eaves upward opening, the ceiling lamp by the reflection down, because there is no light and light exposed, the indoor space is complete and no glare, light canopy light in space distribution is uniform and soft, in this way the aisle design top, owners of the night after the aisle when not because the light is too strong and dazzling.In order to make the corridor more convenient at night, the owner can choose energy-saving lighting, so even if the whole night to open the lighting, power consumption will not be too much. This design is also suitable for use in small living rooms.Choose decorative materials that are texturedThe room is not spacious room, you can use glass, metal and other materials with relatively strong sense of permeability, hollow design will also play a very good decorative effect, the material texture should be collocation consistent, echo each other, will make the space extension in the visual sense, transparent space is a magic weapon to compensate for the lack of light maximum.
- Q:Are there any basic outdoor lighting that does not affect the indoor and can not see the interior of the glass?
- If there is no installation, you can choose the coated glass, the color is very rich, is a mirror on the outside, can see the outside inside, if a large area of glass ah, basically does not affect the indoor lighting, if the glass area is small, there may be some impact, because the coated glass visible light transmittance is very low. If the old glass transformation, can use glass film, and the effect of coated glass is similar, but also the insulation effect, UV, anti riot, the two kinds of materials are light reflection, only during the day to see the indoor outdoor
- Q:Rural housing is affecting the neighbors lighting?
- You're talking about building a house. I don't understand. Not studying architecture... But if you want to build a house that really affects people's right to light, people tell you. You have to lose money... Before you cover it. You made an agreement with your neighbor. How much do you give them for a lump sum?. Let them allow you to build the house you want to build.. So if you're covered, even if you block their light. They have to take it too.
- Q:How can the concert hall be light?
- For professional music hall, acoustical design should be carried out. It is not a simple window opening, and most of the concert halls are artificially illuminated.I do not know whether art institutions, such as the general concert hall, and energy-saving windows must be opened, we should consider high windows as well.
- Q:Glass steel plate equipment to how much money
- A light tile production line of about about 200000, the specific price depends on the level of automation. Qinhuangdao has many lighting tile manufacturing enterprises, and its technology improved from the introduction of British technology at the beginning of 90s.
- Q:Ask East or west building lighting lighting
- East, welcome the morning sun
- Q:How does a basement wall include a light well?
- Implementation of the code for construction area calculation of building works (GB/T 50353-2013).The above specifications: "the building's interior staircase, lift shaft, lift well, pipe well, ventilation shaft, flue, shall be incorporated into the natural layer of the building to calculate the floor space.". A top light wells area should be calculated according to a layer, and the structure height is 2.10m and above, the whole area should be calculated; the structure height below 2.10m, the 1/2 area should be calculated."No cap is not counted.
Our company uses scientific, rigorous and advanced technology, with the industry's advanced management concepts and perfect after-sales service. We carefully promote the well-known production energy-saving lamps. Let us work with you to create a brilliant lighting future in twenty-first Century, promoting the "green lighting of China".
1. Manufacturer Overview
|Annual Output Value
||Above US$100 Million
||20.00% Domestic Market
10.00% Southern Europe
10.00% Northern Europe
10.00% Western Europe
10.00% Mid East
10.00% Eastern Europe
10.00% South America
||RoHS;ISO14001 2004; ISO 9001:2008;CE
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||21% - 30%
|No.of Employees in Trade Department
||50,000-100,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||High and/or Average