Detailed Product Description of Electric Concrete Vibartor ZDN80
ZDN80 high-frequency concrete vibrator is a planetary electric motor in internal concrete vibrator. Its main advantages are vibration force big, great productivity(12000r/min) and light weight(13kg).
Applications of Electric Concrete Vibartor ZDN80
It is mainly used in High-speed railway construction, Road construction, Bridge and so on. And it is especially good at vibrate concrete member with great depth, thickness and complex bar arrangement.
Main Features of Electric Concrete Vibartor ZDN80
1. With high frequency(up to 200Hz), so can easily resonate with concrete then discharge bubber wonderfully and efficiently;
2. Hose can be lengthened as needed;
3.With low noise(only 70 decibels);
4.Assembly line work promises standard quality.
Our Staff have engaged in the small-middle size construction machinery for over 10 years, with abundant experience we believe we can supply you with superior product quality and professional service.
Technical Parameters of Electric Concrete Vibartor ZDN80
Diameter of Vibrator Head:
Length of Vibrator Head:
- Q:What is the rechargeable concrete vibrator?
- The surface vibrator is placed directly on the surface of the concrete, and the vibration wave generated by the vibrator 2 is passed to the concrete by means of a fixed vibrating bottom plate 1.
- Q:What kind of vibrating method is used in the process of column concrete vibrations?
- And the step of dehumidating the concrete mixture discharged into the pouring compartment.
- Q:What is the effect of concrete vibrations?
- Vibration rod inserted into the lower layer has been the depth of concrete should be not less than 5cm, strictly control the vibrating time, usually about 20 seconds, to prevent leakage or vibration
- Q:What are concrete vibrating machines?
- When using a plug-in vibrator to compaction concrete, the vibrating rod should be inserted vertically into the concrete. In order to make the upper and lower concrete joints into the whole, the vibrating rod should be inserted into the lower concrete 50mm.
- Q:What are the concrete vibrators?
- Vibrator, attached external vibrator, flat surface vibrator and vibration platform, and other four categories.
- Q:What is the range of concrete vibrating rods?
- 1) When concrete is layered, the thickness of each layer of concrete shall not exceed 1.25 times of that of the vibrating bar. When vibrating the upper layer, it shall be inserted into the lower layer for about 5cm to eliminate the seams between the two layers.
- Q:What are the vibrations of cast-in-place concrete slabs?
- Mechanical vibration of concrete should be consistent with the following provisions of the editor
- Q:What are the concrete ramps?
- Each point of vibration time to 20 to 30 seconds is appropriate, the general surface of the concrete was horizontal and uniform slurry and no longer so far, no significant subsidence, that has been vibrant, you can stop the vibrator.
- Q:Concrete vibrations is not divided into artificial and mechanical two?
- external vibrator, shaking table and so on. Internal vibrator working mechanism: internal vibrator and surface vibrator is mainly
- Q:What are the requirements for vibrating concrete with vibrators?
- (2). Plug-in vibrator should be noted that when the fast pull slowly pull, not because of the bar fast and left in the concrete hole.
Our main products consist of various spraying machines and road machineries. Spraying machines mainly include putty, plaster, mortar, fire-proofing material, water-proofing material, water-soluble formula spraying machines, mortar conveying and grouting machines. Road machineries mainly contain road roller, tamping rammer, plate compactor, road cutter, cutting blade and power trowel.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||50.00% Domestic Market
15.00% Southeast Asia
15.00% South America
5.00% Mid East
5.00% Eastern Europe
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||10,000-30,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||High and/or Average