DUCTILE IRON GATE VALVE Industry Valve with Competitive Price

Ref Price:
Loading Port:
China main port
Payment Terms:
Min Order Qty:
100 PCS
Supply Capability:
1000 PCS/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Structure of Gate Valve Description:


A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.


2. Main Features of the Gate Valve:

• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber

•  Free of water pollution

• High manufacturing accuracy

• High strength

• Environmental protection and energy saving

• Good visual effect

3. Images


DUCTILE IRON GATE VALVE Industry Valve with Competitive Price

DUCTILE IRON GATE VALVE Industry Valve with Competitive Price

DUCTILE IRON GATE VALVE Industry Valve with Competitive Price

4. Gate valve Specification

Gate valve

Ductile iron gate valve

Flange Gate valve

Our company can produce all kinds of valves, If you have any inquiry, please contact us, we will offer you our best price.

1,good quality and competitive prices

2,WRAS,CE,ISO 9001 approved.

3,AKZO epoxy coating available

Flanged ends according to BS,DIN,MSS,ANSI JIS

Designed according BS,DIN,MSS,ANSI JIS

Ductile Iron or Cast Iron body, bonnet and handwheel

Cast iron wedge, NBR/EPDM coated

Stainless steel stem, epoxy coating




1. What's are the characteristics of gate valve?

The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. 

2. What is the work principle of gate valve ?

 The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. 

3.  What is the structure?

Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Does the relief valve have a gate valve?
With the ball valve, needle valve, with the valve did not see, but there should be some.
Q:What do you mean by gate valve type RVHX-0150-10 and Z45X-16Q?
Z45x-16q, Z means gate valve, 4 means flange connection, 5 refers to dark rod gate valve, X means rubber seal, 16 refers to nominal pressure 1.6MpaRVHX means manual gate valve, 150 refers to the caliber of DN150, and 10 indicates nominal pressure of 1.0MPa
Q:Soft sealed gate valve and hard sealing gate valve which good?
If the caliber, material and pressure levels are the same, the current market price is still soft sealed gate valve, about 20-30%.
Q:What are the features and uses of the gate valve?
What is gate valve? What is the purpose of forged steel gate valves? What are the features of forged steel gate valves?Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. The gate valve movement direction perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. The gate has two sealing surfaces, and the two sealing surfaces of the most commonly used gate valves form wedge and wedge angles vary with valve parameters. Gate valve drive classification: manual gate valve, pneumatic gate valve, electric gate valve.DefinitionGate valve means the closing of the valve (gate) along the central line of the vertical direction of the valve. The gate valve is mainly used for cutting in the pipeline.The valve is a valve with a very wide, cutting device general caliber DN = 50mm use it, sometimes a small diameter cutting device also use valve, gate valve has the following advantages:Fluid resistance is small.Minor force needed for opening and closing.Medium flow is unrestricted.When opening fully, the sealing surface is eroded by the working medium smaller than the cut-off valve.The shape is relatively simple and the casting process is betterValve also has shortcomings:The overall size and opening height are larger. Larger space required for installation.In the process of opening and closing, there is relative friction between the sealing surfaces, which may cause galling.Gate valve generally has two sealing surface, processing, grinding and maintenance to increase some difficulties.
Q:Will the water supply and drainage to wear civil air defense gate valve, the use of bright rod or dark rod?
3, soft sealing rubber lining valve plate size uniform, interchangeable. Therefore, the soft sealing gate valve will be the direction of development, but also the water supply industry is willing to adopt a valve.
Q:What does the gate valve SZ45X-1.0 stand for?
A modelModel SZ45T-1.0, especially in DN100 ~ DN300 piping, soft sealing gate valve shall be used
Q:Notes on flat gate valves
internal structureThe 1 seat O ring seal and preload floating seat structure, so that import and export of two-way valve seal plate; and the structure of the normal valve opening and closing torque only 1/2, can easily open and close valves2. when fully open, the channel is smooth and straight, the flow resistance coefficient is extremely small, and there is no pressure loss. The pipeline can be cleaned through the hair bulb3 the packing structure with the ability of self sealing, without frequent adjustment, opening and closing very lightweight, and reliable seal, the stuffing box is arranged at the auxiliary seal oil into the structure, absolutely reliable sealing performance, thereby achieving zero leakage; solve the shortcomings of the general valve packing leakage of the most vulnerable4., when the flat gate valve is closed, it can automatically unload the inner cavity high pressure, and ensure the safe use5., fully enclosed structure, good protection performance, can adapt to all-weather requirements6., the valve seat sealing structure should be elastic, preload, upper and lower sealing seat at the same time sealed structure. The valve seat and the seal are always face to face sealed.The 7. seat has self-cleaning function and is free of direct airflow during valve opening or closing. The seat shall be made of lubricated, non wearing material.8. valve actuator failure will not affect the other parts of the valve, maintenance and replacement work can be carried out without removing the valve.9. yoke sleeve aluminum bronze yoke sleeve with pin type thrust bearing to minimize operation torque.10. stem - thread length until bracket; dowel and spot welding; stability.11. pressure seal - simple construction, with sectional retaining rings and silver plated low carbon steel gaskets, helps to remove and achieve the best bonnet seal.12. seat ring - welded seat ring is perpendicular to the flow channel and is easy to maintain.
Q:What is the soft seal gate valve?
Commonly used soft sealing gate valve model is divided into: Z45X and Z41X, the difference is that the Z41X is the Ming bar, and Z45X is dark rod.Matters needing attention in packing and transportation of soft sealing gate valve:Soft sealing gate valve before transport, should use the rope to tie up the small caliber.Before transportation, the lighter sides of the valve should be sealed.For larger caliber soft sealing gate valve, it should be used to carry out simple packing, it can better prevent the valve in the process of transportation damage.
Q:What is an inverted seal gate valve?
The inverted sealing gate valve is provided with an inverted sealing device, and when the valve is fully opened, an inverted seal is formed, and the filling can be changed under the normal operation of the system.
Q:Gate valve z45h-10dn250 length of the body?
Z45h-10dn250 body length L=330mm, this valve is hidden bar, elastic seat, sealing gate valve, gate lining, lining fluorine, belong to soft seal

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range