Compression Garbage Truck 4X2 (QDT5141ZYSI)
Certification:ISO9000, CCC, TS16949, CE
Emission Standard:Euro 5
Engine Type:2 Stroke
Loading Capacity(Kg):4325, 4025
Curb Weight(Kg):9480, 9780
Hydraulic System Rated Power(MPa):19
Origin:Qingdao, Shandong, China
Production Capacity:12, 000/Year
1. Arc-shaped Side Plate structure and Frame Structure optional
2. Adopting high strength wear-resisting plate for loading device to sustain repeatedly impaction and friction.
3. Key components like guide rail are all machined parts equiping high-tech nylon ensuring precision and steady.
4. With help of Double Pump and Double Circuit System, working life is raised and energy consumption has been reduced.
5. Adopting imported multitandem valve for compressing, realizing stable two-way compression.
6. Compressing system has both single cycle and auto-continuous compressing loop.
|Notice Type:||QDT5141ZYSI||Driving Type:||4X2|
|Wheel Base:||3900mm||Curb weight:||3780kg|
|Rated load:||4220kg||Maximum total mass:||14000kg|
|Approach angle:||26°||Departure angle:||15°|
|Place of origin:||Qingdao,|
|Tank Volume:||12m³||Filling Volume:||1.9m³|
|Hydraulic System Rated Power:||1.9 Mpa||Filler Opening Lower Edge Ground Clearance:||1130mm|
|Filling Time||25(S)||Garbage Unloading Time||40(s)|
|Waste Water Tank Volume||≥200(L)||Mechanical Hand Tipping Quality||≥600(kg)|
|Garbage Compression Density||≥800(kg /m³)|
- Q:Common trouble of truck starter?
- The fault point in general are: Starter bearings (copper sleeve) wear gap is too large, the starter brush inside the starter is too short, too dirty, it is normal to the maintenance of common problems, if the starter has fault, the fault point may not start very much, different places may damage with a fault feature if the magnetic switch is damaged, you can try to use the pliers (a thick wire) anode connection starter magnetic switch with the ignition lock, ignition is usually with the sewing thread. If you can't start to coarse terminal connected to the stator wire with magnetic switch on connection), fault characteristics of the bearing clearance is too large is the engine sound started boring very heavy, and so on, wow, this question is too general, so much a fault will not end, said it had several. Don't understand. Just ask me,
- Q:How many kilometers will the tires of the big trucks be replaced
- The vehicle must be replaced at regular intervals to maintain safety and keep the vehicle in its best condition. Over time, the tread on the tires is very large and can lead to very dangerous driving conditions. Here are some ways to maintain your car tyres:Check the tire pressure regularly.(2) avoid hitting obstacles.(3) indication of tyre wear to wear shall be discontinued.(4) wheel alignment and balance.(5) prevent the sun, oil, acid and hydrocarbons from damaging the tires.(6) tyre alignment.
- Q:What is the useful life of the lorry?
- According to the current national car scrapping requirement, in the camp bus carrying in miniature (including cars), small, medium and large (19 or less) the use of a taxi for 8 years, more than 19 large taxi can be extended for 4 years, tourism vehicles use for 10 years (may be extended for 10 years);
- Q:How do European Truck simulators know the location of other car companies?
- Press G in the game and click on "truck management" below. You can see all the trucks in your company, and know where each car is, and manage it, such as painting, refitting, or selling!
- Q:Which brand is the best for truck tire?
- No best. Are based on personal use of road conditions, travel time, many factors to constant.Foreign companies such as Michelin, Bridgestone, Goodyear tires these good quality, but the price is relatively high.
- Q:Big truck shift problem
- You are using a fast 12 speed gearbox or a meal or a long time, you can feel a most appropriate proportion of speed and the speed of the engine, this depends on you
- Q:What's the freight rate of 9.6 meters?
- Short distance vehicle transport: according to the weight and volume of goods to be calculated, to Beijing to Tianjin port, for example, the weight of goods is about 30T, the car is 12.5 meters semi-trailer, a freight car in about 1900 yuan.
- Q:How can there be a lot of stalls in the big trucks? How do they hang up?
- The truck shift depends on speed to idle, empty easy hanging file must first and then press clutch gear, shift to shift clutch tower and then step on the clutch gear, now cars generally have a synchronizer is a clutch can.
- Q:What is a single row truck?
- A single row of freight cars refers to a truck with only a single row of seats in the driver's cab. It can not be taken by passengers. Only the driver's cab is manned by the approved number.The freight car (Wagon) is a commercial vehicle designed and equipped mainly for carrying goods. It can be used to tow a trailer.
- Q:GTA San Andreas to grab a truck?
- If I practice more, I will always fail, so long as I can catch the pace with the big truck
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range