Composite boom aerial working platform working height 32m
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The max. working height of this aerial working platform is 32m.
It can be applied in various conditions for aerial working, such as urban road, suburban road, highway, airport, bridges and culverts and so on.
We start this business from 1998, have many years of design and production experience.For the upper structure, we use HQ600 high strength steel, for some key components, we imported from Europe to assure product high quality.
Our product is durable and easy operation and maintenance, we can supply training for customer in our factory for free. pls find below detail parameters:
Bulletin No. | KFM5220JGK | |
Type | GKH-32Q | |
External dimensions（mm） | 11260×2500×3710 | |
Structure type | Three-section articulated boom & One-section telescopic boom | |
Working Cage | Internal Size（mm） | 1100×620×1000 |
Rated loading（kg） | 200 (or 2 persons ) | |
Max. Working height（mm） | 32000 | |
Max. Height from ground（mm） | 30300 | |
Max. Working radius（mm） | 13350 | |
Working radius when doing the highest height（mm） | 4600 | |
Working Boom | Max. Raising angle of lower boom（º） | 80 |
Max. Raising angle of upper boom（º） | 70 | |
Max. Raising angle of jib（º） | 90 | |
Boom rack rotation angle（º） | 360 | |
Max. Extending traveling of extending boom （mm） | 7000 | |
Outrigger | Vertical span（mm） | 5750 |
Horizontal span（mm） | 4800 | |
Traveling of vertical outrigger（mm） | 650 | |
Adjustment | Single adjustable | |
Chassis Introduction
Traveling Performance Parameters |
Chassis model | ISUZU FVZ34Q |
Persons | 3 | |
Axle base (mm) | 4650+1300 | |
Wheel base (front/rear)（mm） | 1960/1855 | |
Driving mode | 6×4 | |
Front suspension（mm） | 1335 | |
Rear suspension（mm） | 2375 | |
Approaching angle（º） | 26 | |
Departure angle（º） | 14.5 | |
Max Grade ability（%） | 20 | |
Min. Turning diameter（mm） | 18800 | |
Min. Ground clearance（mm） | 265 | |
Engine | Engine model | 6HK1-TC |
Rated power（kw/r/min） | 191/2700 | |
Torque（N、m/r/min） | 558/1600 | |
Max. Speed（km/h） | 90 | |
Gas consumption per one hundred miles(diesel oil) （L） | 24.2 | |
Specification of the tire | 10.00-20 | |
The whole weight（kg） | 22380 | |
Max. Weight with whole loading（kg） | 22575 | |
- Q: Is the truck crane and truck crane mean?
- and the crane is only used to unload the goods on the carriage, usually installed in the car between the cab and compartment, the largest lifting capacity Only about 3 tons
- Q: Do you need a harness for a truck crane?
- is more than the legs and pumps and other equipment, cab is also similar, The seat belt is of course
- Q: What about the Reza car cranes?
- Crane products in line with national testing standards, but also the use of German test testing standards, the crane's driving performance, operating performance and structural strength and other aspects of the test were tested, the product quality of the German manufacturing level.
- Q: What is the principle of car hanging arm?
- The cylinder 1 is of the piston type and is made of double-sleeved casing as the fuel supply passage for the cylinder 2. However, the manufacturing process is complicated and the conventional piston double acting cylinder is used. However,
- Q: How to get the weight of the truck crane
- If the rod is stretched close, the hook is close to the body, the center of gravity is very small, you can bear the heavier load.
- Q: What is the difference between a truck crane and an all-terrain crane?
- Ordinary crane tonnage small transitions difficult ground requirements Daquan ground cranes to facilitate the transfer from the weight of Oita and over the super-lifting mode of lifting tonnage in more than a few hundred tons or even more than tons of wind turbine for the installation and removal of the whole
- Q: How many car cranes are there?
- Axis, the number of wheels is less, generally 8-axis 18 rounds, so the car crane is usually smaller tonnage, usually within 100 tons.
- Q: Does the truck crane need to be certified?
- (the investigation is relatively small, and the annual audit a little expensive, many of the crane did not!
- Q: What are the specifications and standards for truck cranes and tire cranes?
- General specification for lifting gear limiter of GB 7950 boom type crane GB / T 3766 General technical requirements for hydraulic systems
- Q: What is a truck crane?
- From a large range of weight, from 8 tons to 1600 tons, the number of axles from the chassis, from 2 to 10 root.
Send your message to us
Composite boom aerial working platform working height 32m
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
