busbar ribbon 0.2*5mm
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 339 ton kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1、基材参数Base Copper Parameter
铜基材Base Material | TU1 oxygen-free C10200 |
成分含量 Content | CU>99.97% |
导电率 Electrical conductivity | ≥100% IACS |
电阻系数Resistivity | ≤0.017241Ωmm2/m |
2、涂层成分Soldercomposition
涂层成分 Solder Type | 涂层成分比例 Solder composition rate | 单面涂层厚度(mm) Solder Single Thickness(mm) | 涂层厚度公差(mm) Solder Thickness Tolerance(mm) |
含铅 (Leaded) | Sn60%Pb40% | 0.01-0.04 | ±0.005 |
Sn63%Pb37% | 0.01-0.04 | ±0.005 | |
Sn62%Pb36%Ag2% | 0.01-0.04 | ±0.005 | |
无铅(Lead-free) | Sn97%Ag3% | 0.01-0.04 | ±0.005 |
其他成分比例可根据客户工艺要求定制Other solder composition available according to customer’s technical requirement |
3、产品几何尺寸及公差Physical Dimension and Tolerance
类别 Type | 厚度范围及公差(mm) Thickness Range and Tolerance(mm) | 宽度范围及公差(mm) Width Range and Tolerance(mm) | 长度及公差(mm) Length Range and Tolerance(mm) |
互联条 Interconnect ribbon | 0.15-0.3 ±0.01 | 1-2.5 ±0.05 | 28-500 ±1 |
汇流条 Bus Bar | 0.2-0.4 ±0.01 | 3-8 ±0.05 | 28-1205 ±1 |
其他尺寸可根据客户工艺要求 Other Dimension available according to customer’s technical requirement |
- Q:What is the difference between the expensive solar energy and the cheap one?
- Cohesive light film vacuum tube is used their thermal power generation technology, positive negative light, heat, warming faster, higher water temperature, which is unique in the world (Himin patent, ultra cold polar tube, Antarctic expedition team designated products, 40 degrees below zero still out of hot water, hot water is not broken; they are equipped with low winter) the temperature of the water level sensor, accurate induction, automatic operation of the whole system, you don't have to worry about is not water ah, can bathe ah; not only that, once the hot water machine what, their customer service staff will serve you within 48 hours. This is not high price but not expensive, is the value for money, or even value for money?
- Q:Outdoor solar energy products, how can we do the process of IP65 level, the design of the water which should be noted that what? Beg enlighten heroes!
- Sub form to be simple, the need to seal the place where the seal can not add the province.Second, is the protection of components, internal structure should pay attention to water and diversion, it is best not to enter the water.
- Q:What are the forms of solar energy? My villa would like to design a comprehensive utilization of solar energy.
- Solar energy can solve hot water, power generation, heating, swimming pool, breeding, lighting, cooking, and many other problems, you really want to design a comprehensive utilization of solar energy can find me
- Q:Solar energy product development prospects?
- Summary: at present, the country's top ten brands of solar companies together market share is less than the national market of 10%, companies want to get a larger market share is difficult. Domestic solar water heater market development problems, intense competition. Local laws and regulations activate the project market, the development of the industry ushered in new growth, the rapid development of solar water heating system engineering market, government policy support. The pain of the industry - too frequent flow of talent. The flow of talent of the solar water heater industry is too frequent, among enterprises personnel frequent job hopping, which is harmful for the development of enterprises, but also bring the product homogeneity and marketing homogeneity consequences, market promotion means that the same product function and price of roughly the same situation.
- Q:Is it hot in summer and the water is hot in winter?
- Cloudy conditions, it is estimated that it will not be too hot, no care. If there is light in winter, then normal heating, you can use
- Q:Solar energy items in daily life
- The solar water heater, solar flashlight, solar micro kitchen, decoration, solar car
- Q:What are the references of the solar automatic tracking system
- Using solar automatic tracking in the photovoltaic power generation system, can effectively improve the utilization of solar energy. Therefore, the research in this paper to improve the efficiency of photovoltaic power generation, has important significance to promote the popularization and application of photovoltaic power generation. This paper proposes a photoelectric tracking mode and solar tracking combined all-weather solar the automatic tracking method. Analyzed and sunny, cloudy and rainy weather condition three
- Q:Or must there be built - in battery? If yes, then use the mobile phone lithium battery can?
- Solar panels can not be used directly to charge mobile phones and other products. The output voltage of the charger for mobile phone and other products at around 5V, and the output voltage of the solar panel is not fixed, fluctuated, when more than 5.5V or higher, causing permanent damage to products such as mobile phone, must control the output voltage between 4.5 ~ 5.5V through the conversion circuit.Built in battery is in order to output more stable, but the premise must be configured safe and effective protection circuit and voltage conversion circuit.
- Q:How to make better use of solar energy
- The history of modern solar energy can be calculated from the 1615 French engineer Solomon de Cox in the world invented the first solar powered engine. The invention relates to a machine for pumping water by using solar energy to heat air to make it work. Between 1615 and 1900, the world has developed a number of solar power devices and other solar devices. Almost all of these power plants by condensing method to collect the sunlight, engine power is not the working fluid is mainly water vapor, the price is expensive, little practical value, for the majority of fans of solar energy manufacturing. Twentieth Century 100 years, the history of the development of solar energy technology can be divided into seven stages.
- Q:The steps of making solar technology stubs
- Step:1, the walnut tip toward the fire on the fire for a while, and then thrown into the cold water, walnut will split along the seam.2, the suture will break the walnut into two halves.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
busbar ribbon 0.2*5mm
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 339 ton kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords