Pure Graphite Powder - 98.5% Fixed Carbon, VM0.7, 1% GPC Carbon Additive Manufactured in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 30 m.t.
- Supply Capability:
- 5039 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The High-purity Graphitized Petroleum Coke is made from high quality petroleum coke under a temperature of 2800°C. As a high-purity carbon material, it has characteristics of high fixed carbon content, low sulfur, low ash, low porosity, high absorptive character , no residue will be left and save production cost etc.
This product can be used as carbon raiser (Recarburizer) to produce high quality steel, special steel, cast iron and alloy or other related industry. We can get high quality steel if use it. It can also be used in plastic and rubber as an additive.
Features
The graphitized petroleum coke powder (grain) is made by graphitization heat treatment of high-quality low-ash petroleum coke at high temperature of 2800 ° C or above in vacuum. The product is featured by high carbon content, low hardness, high temperature resistance, large porosity and low heat conductivity coefficient. Compared with the traditional natural graphite and calcined coke, it can obviously improve caking property and stabilize friction coefficient, maintains the stable and comfortable braking process, and reduce the damage to mating plate surface, brake noise, wear and cost, and is an ideal material for the friction material plant.
In order to control the package and quality, we send people to inspect the loading at loading port and take samples for third party inspection for everyshipment, and will keep customers updated about the loading condition and the inspection result.
Graphite petroleum coke is used in producing casting, it can increase the used quantity of Scrap steel and reduce the quantity of Scrap iron, or use no Scrap iron at all, graphite petroleum coke has high absorptive character, no residue will be left, save production cost.
Specifications
Products | GPC | |
F.C.% | 98.5MIN | 98MIN |
ASH % | 0.8MAX | 1MAX |
V.M.% | 0.7 MAX | 1 MAX |
SULFUR % | 0. 05MAX | 0.1MAX |
MOISTURE % | 0.5MAX | 0.5MAX |
SIZE: | 1-5MM 90% min | |
Package | By MT jumbo Bag | |
Pictures
FAQ
1, Usage: used to improve the Carbon content in steel-melting and Ductile iron foundry. It is more and more popular
2, Characteristic: high carbon, low sulfur, with stable effect for improving the carbon content, high absorptive of carbon.
3, apply: Used in electric furnace steel smelting and cast-iron for improving the carbon content
- Q: What is the industry standard of graphite powder coating for casting?
- The two is fine, the finer the better, generally with the "eye" as a unit, that is, sieve stone toner used in the screen, square inch area included in the number of holes, the larger the number the better.
- Q: Is the graphite electrode broken like graphite, fossil oil, coke and graphite powder?
- Graphite electrode pieces in different data definition of graphite scrap is different, some data and literature of the graphite particles are called not great pieces of graphite (such as graphite) and some say that graphite products have a certain size, into a block of graphite broken, we are here to say Shi Mosui is second, often called as the graphite block. The production of graphite from graphite products, graphitization and machining process. Graphite waste used as an additive and as a conductive material in the steelmaking and casting industries.
- Q: Does anyone know how to change graphite powder into graphite?! What kind of equipment do you need?!
- If the isostatic graphite is made by isostatic pressing equipment, it can be divided into cooling method and hot isostatic pressing method. The machine needs import and it is expensive. The basic is to squeeze into a square or cylindrical powder.
- Q: How to identify iron powder and graphite powder in a simple way?
- Can also take the first touch, using magnets to attract or drop method with acid identification of three substances. [a] analytical method (first touch after magnet): touch the two kinds of powder by hand, are oily powder graphite powder, and then take the other two kinds of powder with a magnet, the magnet can be as for iron, can not be sucked up into powder;
- Q: Is oxygen allowed in the oxygen pipe?
- The so-called oxygen pipeline, which depends on the medical or edible, or industrial oxygen pipeline. If it is industrial, a little graphite is possible, but the proportion can not be too large
- Q: Can graphite powder be used for concrete?
- The graphite powder is soft, black and gray, greasy and polluting paper. Hardness is 1~2, along the vertical direction with the increase of impurities, its hardness can be increased to 3~5. The specific gravity is 1.9~2.3. Under isolated oxygen conditions, the melting point is above 3000 degrees Celsius and is one of the most refractory minerals.
- Q: The difference between silicone and silicone?
- Characteristics of silica gel:Silica gel is a one component, room temperature vulcanized liquid rubber. Once exposed to air, the silane monomer condensed, forming a network structure, crosslinked, unable to melt and dissolve, elastic, rubbery, and adhesive. The thermal conductivity is slightly higher than the general rubber, but compared with the thermal grease is much lower, and once cured, it is difficult to separate the adhesive objects, generally can only be used in graphics cards, memory radiator. Mainly used in silicone adhesive low-end card heat sink and the main chip, bonding and particles, particles of the memory memory and radiator. The high-end products are generally used to dissipate heat with grease, and then use the clip fins fixed on the substrate, but it will increase the cost of. The radiating fins are fixed in the low-end graphics chip and good memory particles, and the heat sink in the low-end graphics cards generally are relatively small, so the use of silicone adhesive is common; and high-end graphics and the CPU heat is far greater than the general low-end graphics chip and memory particle heat generation, and the head is relatively CPU so, the grease with radiator and clip form. If used on the CPU will cause overheating, and it is difficult to remove the heat sink, pull down, it may directly damage the CPU or CPU socket. And if you pull down the silicone adhesive cards, heat sink, it is possible to display the chip from the PCB pull down. From this point, we can see who has a better heat conduction effect.
- Q: Why is there a range of electrode powder powder resistivity? The reasons for the high and low are not good.
- A cylinder is inserted in the pipe, and the cross section of the pipe is slightly smaller than the inner diameter of the sample tube. The lower cylinder is fixed on the base of the instrument, and the upper cylinder can move up and down in the tube as a prop to pressurize the sample. The sample is located in the insulating casing on the cylinder between the positive and negative pole and galvanometer millivoltmeter are respectively connected to the drum two cylinder, rotary measuring height, driven by the leading screw rod lifting rod to balance, balance level, sample by 3.92MPa pressure, then switch on the current, the current adjustment into the sample to 300mA, then open the switch millivoltmeter,
- Q: What is the simple test method for graphite powder used in casting?
- Now the domestic inspection method of carburizing agent is the national standard of coal inspection method, the specific test of carbon content, volatile content, moisture, ash, sulfur and so on. The easiest way is to draw on the paper, drawing trace smooth, obvious is not obvious graphite products, may be coal or petroleum coke graphite the powder
- Q: What is graphite powder?
- Graphite is soft, black and gray; greasy feeling, can piece of paper pollution. Hardness is 1~2, along the vertical direction with the increase of impurities, its hardness can be increased to 3~5. The specific gravity is 1.9 ~ 2.3. Under isolated oxygen conditions, the melting point is above 3000 degrees Celsius and is one of the most refractory minerals. Under normal temperature and chemical properties of graphite is relatively stable, insoluble in water, dilute acid and dilute alkali and organic solvent; different high temperature reaction with oxygen, carbon dioxide or carbon monoxide; only in halogen fluorine can react directly with elemental carbon; under heating, the graphite powder is easy to be oxidized under high temperature, acid; but with many metal reaction, formation of metal carbides, can smelt metal at high temperature.
Send your message to us
Pure Graphite Powder - 98.5% Fixed Carbon, VM0.7, 1% GPC Carbon Additive Manufactured in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 30 m.t.
- Supply Capability:
- 5039 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
