2W 5050 Back Pin G4 SMD LED Lamp
- Ref Price:
-
$2.27 - 3.61
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
2W 5050 back pin g4 smd led lamp
Feature
1. Quartz Glass housing
2. High lumen flux output up to 150 lm for white
3. Operation Temperature: -20°C to 40°C
4. White/Warm White/Neutral White be optional
5. CE & RoHS Certification
6.1W, 1.5W, 1.6W, 1.8W MR11 led spot light,
7. 6/9/10/12pcs SMD5050 LED,
8. Luminous Flux up to 150lm,
9. Operating at 12V DC,
10. It is designed as a direct replacement of MR11 halogen lamps,
11. G4/MR11 Base is available.
Specification
| Power | 1.1W/1.5W/1.6W/1.8W |
| LED | Epistar SMD5050 |
| LED Quantity | 6/9/10/12 Pieces |
| Luminous Flux | 90-150LM |
| Base Type | G4 |
| Working Voltage | 12VDC |
| View Angle | 120 Degree |
| Color Temperature | Cool White/Pure White/Warm White |
| Housing Material | Plastic |
| Size | 6 LEDs: D25.6xH4mm 9 LEDs: D27.5xH4mm 10 LEDs: D30.3xH4mm 12 LEDs: D33.5xH4mm |
Application of smd spot light
Landscape Accent/Spotlighting
Architectural Lighting
Display Case Accent
Artwork Lighting
Mood Lighting
Amusement
Park Accent
FAQ
1-May I have your samples for existing items?
According to our sample policy, samples are free of charge for our common existing ones within a certain amount but customers need to bear the express charge. If customers have an international express collect account no. for FedEx, UPS, DHL and so on, this will be more convenient for us.For long-term business, we could bear the express charge.If customers are satisfied with the finished samples and will
settle the first order, we will start to refund the sampling charge. For actual refundable procedure, this will be finalized according to actual sampling charge, the first order amount and actual communications.
2-Could you do sampling according to my actual sample, special demand, design or own idea?
Our R & D dept. has experienced engineers in structure and electrocircuit. And we have good cooperative factories in molds for plastic and metal. Based on these, we are able to achieve your demanded samples.
3-How do you control the quality?
We have strict quality control system including incoming material inspection, production line management, final full inspection and random inspection on loading. Based on these, we are able to deliver final high quality products for you.
4-What's the period of validity for complaint?
Normally, we accept the complaint within one month after receipt of the goods. For some special circumstances, please kindly contact with our sales for your actual order.
- Q: What determines the brightness of the patch LED?
- The current through the lamp itself. If the same lamp, so it is necessary to ensure consistency in the different current circuit, the test voltage of little significance, especially in the case of parallel lamp, current a few beads each share is not the same, some big, some small.
- Q: Production of a number of substrates, the use of SMD LED lights, red lights and green lights are not bad, blue lights appear mass dark, do not know why? Is the LED blue light material easy to use dark?
- When making a batch of LED lights, the brightness values of various lights are in accordance with certain rules. Due to achieve a white balance, three RGB color brightness required by the ratio of 3:6:1, that is to say the blue light required brightness is very low.
- Q: What is the principle used in SMD LED lamp, should pay attention to what the problem?
- Pin forming, 1, LED pin molding must be completed before welding, bending angle must be more than 3mm of the gel to bend the stent. Pin over 2 times in the same place can not fold number, pin bent to 90 degrees, and then returned to the original position for 1 times; 2, pin forming must use fixture or by professional personnel to complete the first, pay attention to avoid the epoxy body caused by excessive internal wire fracture; 3, to ensure the distance between pin pin forming consistent with the circuit board; 4, when LED has good welding in the welding process or after, please don't bend light feet, to avoid damage to the lamp.
- Q: Led lamp and Led patch two what is the difference between ah, the feeling is a patch of long service life, whether or not? 5-10 meters pan area lighting lamp selection Everbright shaped or patch shape?
- First of all, I want to say, in the same light emitting chip case, two is not what were, just a different process is a DIP plugin, a SMD patch process, the 3 floor of the right, just some high grade patch.
- Q: How does the LED placement lamp distinguish the positive and negative poles? There is no sign on the light. Thank you
- The light emitting diode is fixed regardless of color. The light emitting diode 1, line: foot length is positive, the negative is short. The electrodes inside the tube can also be carefully observed, while the smaller ones are positive and the large ones, similar to the bowl, are negative. 2, SMD: overlooking the side with the color line is negative, the other side is positive.
- Q: What is patch SMD-LED?
- This really do not know how to answer you, like a sheet of the same type of solder paste used to operate, it can be said that the plug-in is not, it is patch it!
- Q: Is the forward voltage drop of the patch LED too large or too small?
- The pressure drop in the normal range is generally better. The smaller the pressure drop, the lower the power dissipation. The more you save the electricity bill.But not to say that the smaller the better, not in the normal range of low pressure drop products may be defective.In addition, the uniformity of the LED pressure drop is also important.
- Q: How to detect LED SMD beads
- Resistance voltage ordinary pointer table 1.5V in general, and some only in the high resistance file (*10K file) with 9V or 15V battery, so the pointer table to measure LeD beads to hit the highest resistance profile measurement, otherwise useless, of course, at this time the brightness is very small, can not see, can only to judge the positive and negative resistance values see.
- Q: What is the difference in performance between the LED plug-in and the LED patch?
- The cooling of the plug-in is not good, because the plug-in's lamp foot, in order to save costs, generally use iron plus coating, heat conduction is not very good.The strength of aluminium alloy is not enough, it is easy to break, and copper is expensive.Relatively speaking, the patch is good, because the heat is welded on the PCB, copper or direct aluminum substrate cooling, patches near.Otherwise, why do high-power patch it?!SMT direct placement machine, a high degree of automation, low rate of bad.
- Q: What does "1210" mean in patch LED?
- 1210 represents the size of the LED package specification (size, specification), and represents the length and width of the resistanceSpeed adoption!!!
Send your message to us
2W 5050 Back Pin G4 SMD LED Lamp
- Ref Price:
-
$2.27 - 3.61
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
