Taiwan Epistar Chip With 3.03.6 Volt 0.5W 2835 SMD LED
- Ref Price:
-
$0.16 - 1.03
/ bag
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 10000 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
epista chip with 3.0-3.6 volt 0.5w 2835 smd led
Description
|
Attentions
1. Over-current-proof
Customer must apply resistors for protection; otherwise slight voltage shift will cause big current
change (Burn out will happen).
2. Storage
2.1 It is recommended to store the products in the following conditions
Humidity: 60% R.H. Max.
Temperature: 5°C~30°C(41°F~86°F)
2.2 Shelf life in sealed bag: 12 month at <5°C~30°C and <30% R.H. after the package is opened,
the products should be used within 24hr s or they should be kept stored at <20% R.H. with zip-lock sealed.
3. Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Our Services
1. We have a special R&D center team, which can solve any problems for clients.
2. After sale service can help customers to dealing with any situations after sale.
3. Test all the products before packaging.
4. Two years gurantee time.
5. We also produce all kinds of indoor and outdoor lights.
Quality control
Before the order confirmed finally,we would strictly check the material,color,dimension of the sample step by step
We salesman,also as an order follower,would trace every phase of production from the beginning
We have a QC team,every product would be checked by them before packed
We would try our best to help clients solve problems when they occurred.
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:How can I install the patch LED lamp belt on the wood chip casting board? With double-sided glue will be hot, and can not use the clip on the screw, what should I do?
- Installed indoors, you can directly tear off the stickers on the 3M double-sided adhesive surface, and then fix the light bar where it needs to be installed. Just press it with your hands.
- Q:Patch LED light does not flash, why?
- Hit the meter on the buzzer and measure the patch individually. If the flash is a patch, the light goes off.
- Q:Production of a number of substrates, the use of SMD LED lights, red lights and green lights are not bad, blue lights appear mass dark, do not know why? Is the LED blue light material easy to use dark?
- If you choose the brightness of blue light in the light of the relatively high, so when debugging the white balance (by changing the resistance to change the current, and then change the RGB brightness LED lamp), it is difficult to transfer to the pure white. Therefore, when selecting the lamp, the blue light is generally not bright.
- Q:SMD LED lamp working voltage?
- Single chip of 1 watts, more than a lot, different colors, the voltage will be different. White is usually 3.0-3.6V.* in addition to their working voltage, working current is more important parameters, once the flow, it will burn out.The LED lamp. With chips is variety, many tricks, they can be connected in series and parallel. The voltage is divided into high voltage, low voltage and medium voltage
- Q:How to detect LED SMD beads
- Resistance voltage ordinary pointer table 1.5V in general, and some only in the high resistance file (*10K file) with 9V or 15V battery, so the pointer table to measure LeD beads to hit the highest resistance profile measurement, otherwise useless, of course, at this time the brightness is very small, can not see, can only to judge the positive and negative resistance values see.
- Q:LED light SMD LED package in what form, trouble you under the guidance of...
- Draw your own line, mm is replaced by mil on the line, with vernier caliper measurement, or know the model, count the number of mil. For example, 5050 is a close square with a width of 5.0mm*5.0mmInline LED (such as straw hat lights, 5mm), piranha LED, surface mount LEDSinglechip collection from hardware to software chm
- Q:LED package and LED SMD LED lamp, what is the difference? Will the release agent be used in that part?
- Mold release agent is a functional substance between the mold and the finished product. The release agent is chemically resistant and is not soluble in contact with the chemical constituents of different resins (especially styrene and amines). Release agent also has heat and stress properties, not easy to decompose or wear; release agent bonded to the mold, and not transferred to the processed parts, without prejudice to painting or other two processing operations. Because of the rapid development of injection molding, extrusion, calendering, molding and laminating, the dosage of mould release agent is greatly improved.
- Q:Led lamp and Led patch two what is the difference between ah, the feeling is a patch of long service life, whether or not? 5-10 meters pan area lighting lamp selection Everbright shaped or patch shape?
- If you take a large area light, to see that the lighting requirements, functional lighting, or lighting atmosphere, or ordinary lighting, which is to be considered, the two optical (lens) can bring you the light angle planning.
- Q:What are the storage requirements of SMT patch LED (LED)?
- Clean? use no designated chemical liquids to clean SMD LED. These chemicals may damage SMD LED.. When necessary, wipe LED at room temperature with alcohol and dry at room temperature for 15 minutes before use? the effect of ultrasonic cleaning on SMD LED is related to the ultrasonic power and the SMD LED assembly method, and shall be checked in advance to ensure that the ultrasonic cleaning process does not impair the SMD LED
- Q:Patch LED features
- Without heating time, lighting is faster than general light (about 3 ~ 400ns).The electro optic conversion efficiency is high, the power consumption is small, and the energy consumption is about 1/3 ~ 1/20 than that of the bulb.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Taiwan Epistar Chip With 3.03.6 Volt 0.5W 2835 SMD LED
- Ref Price:
-
$0.16 - 1.03
/ bag
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 10000 Pcs bag
- Supply Capability:
- 100000 Pcs Per Month bag/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
