2835 SMD 1.2m T8 18W LED TUBE with 3 years warranty
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED T8 tube 120cm 4ft 18w
1. LEDs: 100pcs SMD2835;
2. High lumen 100-110LM/W ;
3. High PF>0.95, High CRI 70/80/90;
4. Input voltage(V): AC85-265V;
5. Lamp body material: Aluminum & PC cover;
6. IP rating: IP44;
7. CTT: 3000-3500K, 4000-4500K, 6000-6500K;
8. Working temperature(℃): -20 to 40;
9. Long life 50000hrs ;
10. CE ROHS approval.
Installation:
The Advantages:
1. Provide comfortably lit spaces that reduce safety risks.
2. Replace lamps with tubes designed for fast installation
LED Tube is designed to offer a fast, convenient method of upgrading existing fluorescent lighting systems for LED technology. LED Tube light come in retrofit kit form and include the components necessary to fully comply with Federal Communications Commission (FCC) regulations.
3. Provide essential illumination at lower cost
The variety and volume of lighting fixtures required for safe residential, commercial and professional spaces can be a source of significant expense. Along with the costs of relamping, fluorescent lamps consume a great deal of energy and can contain hazardous materials.
4. LED Tube Light can provide businesses with:
• Significant savings.
Replacing conventional fluorescent lamps with LED tubes can lower energy consumption by as much as 80-90%.
• Lower maintenance costs.
LED Tube Light last up to four times longer than fluorescent lamps, reducing maintenance costs significantly.
• Easier installation.
LED Tube Light are designed for quick retrofitting and simplified installation.
• Better light quality.
LED Tube Light provide illumination without flickers and glare.
- Q:What material is LED fluorescent lamp fittings, such as shell, block?
- The bottom case is pure aluminum, solving the problem of divergence; The mask is a PC milky white or transparent to solve photoelectric transmission and visual effects. The plug is made of plastic, not easily broken and safe.
- Q:Why don't leds need a rectifier
- Because LED is a direct current is needed to light, and the output voltage of rectifier is an alternating current, so can't use rectifier, now LED lamp is built-in power inside, and use it every time you'd better put fluorescent original rectifier and demolition of the starter, but given the easy to use, now LED lamp can be directly on the original fluorescent lamp holder, do not need to disconnect the rectifier, only need to send a link of the starter circuit cut. Because the regenerator will provide an instantaneous high voltage, it will damage the LED
- Q:What is the category of LED bulbs, T6, T8 or whatever?
- Each "T" is 1/8 of an inch. An inch is 25.4mm T12 is 38.1 mm in diameter T10 diameter 31.8 mm T8 diameter 25.4 mm T5 diameter 16 mm T4 diameter 12.7 mm T3.5 diameter 11.1 mm T2 diameter 6.4 mm The number behind T is the perimeter of the lamp. For example, T4 is 4 centimeters, and T5 is 5 centimeters. search That is, the number in the back of T is one eighth of the 25.4 millimeters (1 inch), which is the diameter. Originally, only the electric inductance ballast, "halogen powder" the fluorescent lamp.
- Q:How much is the ballast of the fluorescent tube coming out
- The fluorescent lamp ballast is not to be understood by the idea of the current when it is activated in the lamp tube. The lamp tube of different wattage matches the current of the ballast of different current and the current is too bright or hard to start. Inductance ballasts, for example from 8 w15w20w30w40w when it in tubes without ballast between the output voltage and the zero line is power electricity after being connected in good tubes start according to the voltage at the ends of the lamp power different lamp in 80-110 - v, about 40 w at the ends of the tube voltage 110 v. Electronic ballast is the principle of the second inversion of high frequency oscillation. The output power is achieved by the size of the current supplied by the booster coil. The single-strand wire of the 13W booster coil is made, 25W with a two-ply line of 36W with 3 strands of 55W with 7 strands of gauze, the more power the larger the need of the current. Because of using ordinary multimeter is not suitable for testing the high frequency alternating current (ac) in maintenance electronic ballast can be ignored when the output voltage and to detect components mainly including tubes.
- Q:Ordinary fluorescent lamp ballast can be replaced with led daylight lamp tube
- Your ballast is broken and you can change the ballast, or replace it with an LED fluorescent tube. Different brands need to be modified in different ways. Some dismantlement is ok. My house needs a ballast and a regenerator
- Q:How does barton fluorescent lamp holder replace led lamp tube
- Some leds are single and live, that is, a head of the two pins of a wire, one is zero, this will remove the rectifier, the starter and put liang thread respectively on the bracket in the same two contacts
- Q:In several production workshops of my unit, we will replace a batch of philips T5 fluorescent fluorescent lamps with LED fluorescent lamps. However, it took more than two years to get rid of the old lamp, and it was neither green nor economical, so consult the high man.
- The same way But at the moment there appears to be no systematic recycling system for fluorescent tubes
- Q:What about the quality gap between leds?
- You can look at the whole of the lamp tube first, see the mark on the lamp, mark, model, rated voltage, rated power, etc. And then see if the lamp tube is made of fine workmanship, and how it feels.
- Q:Do the fluorescent tubes save electricity for 10 minutes, or do they save electricity in a split second?
- But when fluorescent lamps are lit up, there is a loss to the filament, so a temporary turn off the light is unnecessary.
- Q:What happens to leds if they are not compatible with electronic ballast? What if it's not a bright flash?
- What happens to leds if they are not compatible with electronic ballast? What if it's not a bright flash?
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
2835 SMD 1.2m T8 18W LED TUBE with 3 years warranty
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
