110V, 127V, 220V, 230V Led Strip --Smd 5050-60, Waterproof

Ref Price:
$1.03 - 4.12 / roll
Loading Port:
Shenzhen
Payment Terms:
TT or LC
Min Order Qty:
5 Rolls roll
Supply Capability:
30000 Rolls Per Day roll/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

General Introduction

  1. LED strip--SMD 5050-60 directly contact to AC110V or AC220V, no need power supply.

  2. SMD35050 could reach to 50m with single power supply cable.

  3. Waterproof ability: Yes

 

Features

1. Easy installation and save cost on power supply

2. Transparent PVC house, high transmittance, bent resistance

3. Flattening appearance, small volume New Package:100 meters per roll for SMD3528 strips, in an outer carton.

4. Any length is available according to your requirement.

 

 

Installation:

1. Install:Take out the package; make sure it comes with necessary accessories, which include fixing clips, middle plugs, and end caps and head wires. Fix the strips with clips onto where you need, put the wire into sockets to light the strips.

2. Cut: the strip can be cut every one meter in the place where marked "scissor drawing"

3. Connect:

1). Power cord front ends connection way;

2). Intermediate head connection way:Plug the head wire into a strip to conduct the electricity or plug a middle plug into the ends of two separate strips to connect them into a long strip, after being connected, seal all the plugs with enough glue;

3). Use end cap to block up the cutting ends:Block up the end with end caps, seal with enough glue to make sure it's still waterproof.

 

Delivery:

Shipping Service

Estimated Delivery Time

DHL

2-8 business days

FedEx

3-8 business days

TNT

2-10 business days

UPS

1-7 business days

EMS

6-14 business days

ePacket

7-12 business days

China Post Air Mail

7-15 business days

China Post SAL

14-30 business days

By Air

3-10 business days

By Sea

30-40 business days

 

1.         3-5 business days for Sample Orders; 7-30 business days for Bulk Orders.

2.         "Business days" means Monday-Friday, excluding holidays.

3.         DHL and UPS cannot ship to military or P.O. boxes address.

4.         The Shipping Service above is for reference only, for any other questions, please feel free to contact us.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How many meters does the LED flash band need? A controller?
The LED numbers of different LED lights are different, and the power will be different. The greater the number of LED, the greater the power of the whole LED band, the length of the controller can also become shorter! A controller of 5 meters is recommended. It's safer to use.
Q:What type of LED lamp comes with the brightest light?
In two different manufacturers, using the same patch made of light, brightness may not be the same, LED is the current device, current is, the higher the brightness, some manufacturers in the pursuit of brightness and low cost, will increase the current to improve the brightness, life will be a lot worse, especially white. You can solve the problem that: 5050 led domestic manufacturers with some formal, ask the clerk to provide product specification, comparison of various manufacturers specifications on luminous flux values, a large number of lumens brightness generally high, of course, do not forget to consider the half angle.
Q:What are the uses of an LED lamp?
A long time ago, lights were usually used in parks, buildings, overpasses, signboards, interior decorations, neon lights, or beauty. Now the lamp with LED lamp do, so called LED lamp belt. The lamp belt can be used for external use or indoor use.
Q:LED is that band good?
Look at the cleanliness of the surface of the LED lamp band. If the LED belt produced by SMT process, its surface cleanliness is very good, and no impurities or stains can be seen. However, if you use hand welding process produced cottage version of LED lights, regardless of how the surface cleaning, there will be traces of stains and cleaning, and at the same time on the surface of FPC will have soldering flux and tin residue
Q:What are the features of a LED lamp?
The metal lamp body and the metal plate hanging apart, put back on the side of a metal plate wall screw rod and the lamp body metal chassis hole set balance, tighten, and served as the "out of" into action to test whether we can easily, easy installation steps after; and the metal hanging plate to tune with smallpox parallel and diagonal parallel installation, in order to achieve the aesthetic effect, and must ensure that the firm is installed in the ceiling; 2, the transport process or during the installation process may be all LED light pressure in a concave inside the lamp body top back, so as not to affect the 3, there is no need to check the lamp fittings or screw like installed in the back the lamp body (usually organic glass accessories, glass rod is used to support the landlord), and ensure the correct installation of fixed, the rest can be temporarily outside the ornaments do not need to install. 4, the installation of lamps, if the lamp is equipped with remote control device, we must distinguish between the fire line and the zero line, otherwise cannot be energized or easy to burn up; when the lamp body prepared with metal hanging plate is connected to the LED note the position of the light source, LED light source will affect the sag effect; 5, fixed to the ceiling when power on to test whether the power is normal, then put the rest on the surface of the lamp body parts installed on the steps.
Q:Troubleshooting of LED light belt
Mainly from the following aspects to identify:1, look at solder joints. Regular LED lamp manufacturers with LED light band produced by SMT patch process, produced by solder paste and reflow soldering. Therefore, the solder joint on the LED light band is smoother and the solder flux is not much, and the solder joint is in an arc shape extending from the FPC pad to the LED electrode.2, look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.3. Look at the cleanliness of the surface of the LED lamp. LED band produced by SMT process, its surface cleanness is very good, can not see what impurities and stains. Hand soldering process to produce a cottage version of the LED lamp band, no matter how the surface cleaning, will remain stains and traces of cleaning.4. Look at the packing. The regular LED lamp belt will be packed with an antistatic coil tray, 5 meters roll or 10 meters roll, and the outer packing will be sealed with anti-static moisture proof packing bag. LED version of the cottage version of the band with recycled reel, there is no anti-static moisture-proof package, a closer look at the reel, you can see the appearance of cleaning labels left traces and scratches.5. Look at the label. Regular LED lights, bags and rolls have printed labels, not printed labels.6, look at the attachment. LED lamp with formal will attach instructions and specifications in the lights inside the boxes, also equipped with LED lights with a connector or card holder; not the accessories and LED lamp with copycat version of the box, because some manufacturers still can be saved.
Q:60 bead LED lamp with power supply, can be used on 120 bead LED lamp belt?
Not to see the number of beads, but the total power lamp.
Q:How much band wavelength does LED blue light have?
When electrons and holes are combined, they can radiate visible light, so they can be used to make light-emitting diodes. In circuits and instruments, as an indicator, or in combination with text or digital display. GaAs diodes glow diode gap, green silicon carbide, yellow light diode, light emitting diode gan. Because of the chemical properties and organic light-emitting diode OLED and inorganic light-emitting diode LED.
Q:LED what does the band add to change colors?
LED light band, only two colors, three colors can change colors.The two color lights come with 2 wires into the 2 LED, and the 1 is the public ground, with 3 lines. The tricolor light comes with 3 wires, 3 into the LED, and the 1 is the common ground wire, with 4 lines.The purchase of finished color, three color controller, in accordance with the port logo, respectively, corresponding access to each line, power, you can control the color changes in the band.
Q:LED which bands are suitable for use?
LED light belt is divided into LED soft light band and LED hard light belt.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range