Product Name: ZE45_7B Excavator
|Operating weight||4,200 KG|
|Travel speed||4.4/2.7 km/h|
|Bucket Capacity||0.17 m3(SAE)|
|Tracking force||34.1 kn|
|Swing speed||11 RPM|
|Bucket digging force||23.7 kn|
|Ground Pressure||38.7 KPa|
|Arm digging force||20.4 kn|
|Boom Length||2,650 mm|
|Arm Length||1,450 mm|
|Upperstructure width||1,600 mm|
|Undercarriage width||1,750 mm|
|Overall Height with cabinet||2,455 mm|
|Rear swing radius||1,600 mm|
|Clearance under counter weight||585 mm|
|Tumbler Distance||1,710 mm|
|Ground clearance||350 mm|
|Overall length for transportation||5,500 mm|
|MAX digging radius||5,530 mm|
|MAX digging radius at ground lever||5,420 mm|
|MAX digging depth||3,405 mm|
|MAX vertical wall digging depth||2,900 mm|
|MAX digging height||5,030 mm|
|MAX dumping height||3,410 mm|
|MAX dozer cutting depth||380 mm|
|MAX dozer lifting height||255 mm|
Why choose us?
CNBM International is a state company, now is one of the largest state-owned group cooperation in China! All the equipment such as tower cranes, produced by CNBM are compliant with the national level quality.
Our engineers will at your services 24hours to solve all your tower crane installation and other questions. Our goal is to provide the best professional services.
CNBM International’s tower crane have strict quality control, only the best quality products can pass the test.
We have professional sales team to guarantee your reply within 12hours to save your precious time.
5 After sales
If the tower crane has any problems, we will solve your problems in first time.
Japan made engine YANMAR 4TNV88
Power 27.1KW/2200RPM, a guarantee of super power
In conformity with the EU III emission control regulations
Imported hydraulic system with dual pump and dual circuit
Guarantee for 3 yrs under normal use and maintenance
Imported hydraulic components, Japan made KYB main pump, multi-circuit valve, swing motor, walking motor, South Korea made gasoline tank
On-line digital monitoring and control system
GPS satellite position(optional)and remote diagnose system(optional)
Light and handy pilot operating system
Cold&warm air conditioner supply under different kinds of weather conditions
Rubber or steel pedrail
- Q:Loaders in the construction site bucket can ultra wide delivery of steel or shovel hook hanging steel, there is no basis?
- Can, no problem, we are here for short distance transport reinforced with 50 forklift transport, the premise is you have to place the rope. Steel can not be tilted, long distance, it is better to use a truck, there is no basis, as long as the end of the forklift move on the line
- Q:50 what is the hourly fuel consumption of the loader?
- 50, the loader's hourly fuel consumption is about 14 oil, but in fact still want to work.Loader: loader (loader) is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, mainly used for shoveling, loading and unloading, earth and stone a class of bulk materials, can also be mild digging on the rock, hard soil.
- Q:What kind of engine does the Dragon loader have?
- The basic configuration of Weifang loader engine.The engine (Engine) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (gasoline engines, etc.), external combustion engines (Stryn engines, steam engines, etc.), motors, etc.. Internal combustion engines, for example, usually convert chemical energy into mechanical energy. The engine is suitable for both the power generating device and the whole machine including the power unit (such as a gasoline engine, an aircraft engine). The engine was first born in England, so the concept of engine is also derived from English. Its original meaning is the mechanical device that generates power".
- Q:How often does the loader change the oil?
- According to the time, the best five hundred hours for a time, but you can according to your workload, if 24 non-stop work, the best month for a time, if not changed every three or four months, the worst year for two times! Changing the oil engine must be replaced, without asking why, must
- Q:What does the ZL50 loader tire model '23.5-25' represent?
- What does the tire model 23.5-25 stand for?23.5 represents the top of the tire by 23.5 inches25 represents a tire with a 25 inch diameter rimNo. for low pressure tyres
- Q:Where is the difference between a loader and a pilot without a pilot?
- The driver with a pilot is operated by the handle, similar to the handle of the excavator. A car without a pilot is operated with a joystick
- Q:There's a stereo in front of the loader, but why not?
- In fact, ordinary sound box is good... After all, the loader noise effect is like that, make a good, not much use
- Q:What brand of loader tires are good?
- Wearable: Guizhou advance, Xuzhou a wordThere are also cheaper: Rongcheng, Henan, Dongying Huasheng Chengshan Jiaozuo Delta and so there are also shuangqian
- Q:What should I pay attention to when learning the loader?
- Four often: that is, in the loader operation, especially loader in the excavation work in case of resistance, do not use the accelerator to control the vehicle condition. Still should be in the case of steady throttle, with the cycle of moving up and turn bucket control lever method to make the loader to maintain normal working conditions, and bucket shovel full of materials. Because of the need for work, lifting and turning the lever of the bucket is what we call "diligence"". This process is very important, and the amount of fuel consumption is critical in the operation of these operations, which should be paid special attention to by operators. Five coordination: coordination is the organic coordination between lifting and bucket control levers. In general, the backhoe process of the loader is that the bucket is flat and the slope is stationary towards the pile. When the bucket is parallel to the hopper, there is resistance, the first should follow the principle of first lifting the arm and then receiving the bucket. This can effectively prevent the formation of the bottom and the ground resistance of the bucket, which can give full play to the maximum breakout force. This kind of parallel operation solves the smoothness of the work site, the comfort of the driver and the unsafe factors in the workplace, and does not often have to clean the work site alone. The utility model reduces the time for leveling the site alone, increases the effective workload, improves the work efficiency and saves oil. In the arm and the rotating bucket lever of organic coordination work, make full use of the loader digging force, lever coordination properly, even the light throttle can also smoothly make the bucket full of material.
- Q:Could you tell me the difference between scraper and loader?
- The scraper is mainly used for large-scale earthwork, such as railway, water conservancy, airports, ports and other projects, in the highway engineering construction is a large-scale roadbed construction, earthwork construction machinery transport an ideal high production efficiency, good economic benefits, can five processes successively completed shovel, soil and soil. Shop, unloading and leveling etc.. Economic operation distance scraper in general 100- 2500m, the maximum distance can reach a few kilometers. Scraper working speed can reach more than 40km/h, fully show the superiority of scraper has high production efficiency and good economic benefits in the long distance in operation. Scraper can be used to directly complete the following grade II soft soil on soil digging, deal with grade III hard it is pre loose after digging. The scraper can also unload and smooth the soil. The soil is filled to the place of filling by layer by layer, and the soil is leveled and compacted.The loader is a widely used in earthwork construction machinery construction, highway, railway, electricity, ports, mines and other construction projects, it is mainly used for shovel of soil, sand, lime, coal and other bulk materials, can also be used as a mild shovel of ore and hard soil digging etc.. Different auxiliary working equipment can be changed, and the lifting, lifting and other materials such as wood handling can also be carried out. In the road, especially in the construction of high-grade highways, loaders are used for filling and excavating of subgrade engineering, aggregate and loading of asphalt mixture and cement concrete field. In addition, the soil can be pushed, flat ground and other mechanical traction operations. As the loader has the advantages of fast operation, high efficiency, good maneuverability and easy operation, it has become one of the main types of earthwork construction in the construction of the project.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range