Vertical Fire Fighting Water Pump with XBD Series

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
1 set
Supply Capability:
10000 set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

                             Vertical Fire Fighting Water Pump with XBD Series

 

1.Structure of Vertical Fire Fighting Water Pump with XBD Series Description

Portable Fire Fighting Water Pump with XBD Series is a high efficient  water facility has characters of easy installation,saving space, water pool is not required.The pump energy efficient, using I mm converter speed control valve control over a large number of energy saving, the elimination of the high level of secondary pollution of water tanks,water tank eliminates the need to wash the cost and trouble,Water Pump achieve soft-start, start on the grid to reduce the impact of pumps to extend life.

 

2.Main Features of the Vertical Fire Fighting Water Pump with XBD Series

  • Water Supply: Urban water supply, boiler or condensate system, water filtering and distributionwater to water districtin charge of pressurizedhigh-rise building pressurization.

  • Industrial boosting: process water systemcleaning systemhigh pressure washing systemfire system.

  • Industrial liquid conveying: cooling and air conditioning systemsboiler feed and condensate systemsmachine matchingacid and alkali.

  • Water Treatment: Industrial circulating system and processing system, environmental protection water treatment and infiltration analysis system, Ultrafiltration systemsreverse osmosis systemsdistillation systemsseparatorsswimming pool

  • Irrigation: Agriculture irrigation and dewatering, sprinkler irrigation, drip irrigation.

3.Vertical Fire Fighting Water Pump with XBD Series images

Vertical Fire Fighting Water Pump with XBD Series 

4.Vertical Fire Fighting Water Pump with XBD Series Specification

 

modelcapacitypressurespeedeffeciencypowernpsh
(L/s)(MPa)(r/min)(%)(Kw)(NPSH)r(m)
XBD1.8/5-50W50.181450652.23.2
XBD2.7/5-50W50.2714506533.2
XBD3.6/5-50W50.3614506543.2
XBD4.5/5-50W50.451450655.53.2
XBD5.4/5-50W50.541450655.53.2
XBD6.3/5-50W50.631450657.53.2
XBD7.2/5-50W50.721450657.53.2
XBD8.1/5-50W50.811450657.53.2
XBD2.3/10-75W10231450685.53
XBD3.4/10-75W100.341450687.53
XBD4.6/10-75W100.46145068113
XBD5.5/10-75W100.55145068113
XBD6.9/10-75W100.69145068153
XBD8.0/10-75W100.8145068153
XBD9.2/10-75W100.9214506818.53
XBD10.3/10-75W101.0314506818.53
XBD2.9/20-100W200.29145072113.5
XBD4.3/20-100W200.43145072153.5
XBD5.8/20-100W200.58145072223.5
XBD7.2/20-100W200.72145072303.5
XBD8.6/20-100W200.86145072303.5
XBD10.1/20-100W201.01145072373.5

XBD11.5/20-100W

201.15145072453.5
XBD13.0/20-100W201.3145072453.5
XBD4.2/25-125W250.42145073223.5
XBD6.3/25-125W250.63145073303.5
XBD8.4/25-125W250.84145073453.5
XBD10.5/25-125W251.05145073553.5
XBD12.6/25-125W251.26145073753.5
XBD14.7/25-125W251.47145073753.5
XBD16.8/25-125W251.68145073903.5
XBD18.9/25-125W251.89145073903.5
XBD5.8/45-150W250.58145073453
XBD8.7/45-150W250.87145073753
XBD11.6/45-150W251.16145073903
XBD14.5/45-150W251.451450731103
XBD17.4/45-150W251.741450731353
XBD20.3/45/150W252.031450731553
XBD23.2/45-150W252.321450731803
XBD26.1/45-150W252.611450731803

 

5.FAQ

What is your product range?

Centrifugal pump, slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, single stage

pump, double suction pump, industry pump, oil pump, paper pulp pump, mud pump, self-priming pump, pipe

water pump, boiler water pump, etc.

Are you a manufacturer?

Yes, we have been in manufacturing and marketing industry centrifugal pump over 20 years.

What information should I let you know if I want to get a quotation?

Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also

provide the pump model you are using now, price will be calculated as per the pump model, if not, we willrecommend relevant product for reference.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is the vacuum pump air compressor?
No, both work in the opposite way. Air compressor, referred to as an air compressor, is a machine that produces compressed air (positive pressure). The vacuum pump is just the opposite.
Q:No negative pressure water supply equipment, both the main pump and auxiliary pump, power is not the same
1) microcomputer frequency conversion control cabinet2) water pump unit3) current stabilizing compensator4) vacuum suppressor5) all kinds of pipe fittings, valves and so on
Q:Metering pumps related matters
2) change the metering pump diaphragmTrouble is often encountered when the old diaphragm is removed. Provide some additional advice on how to remove the old diaphragm.After in the pump head loose, remove the pump head before the stroke length adjustment to the 10% position. To ensure that the electromagnetic axis has sufficient pressure to maintain its connection firmly, so that you can unscrew the diaphragm.The pull end torque from the Jack out of the screw. Seize the liquid counter clockwise rotation. There is a slight resistance that can unscrew the diaphragm.Chemical 3 measurement may end in fluid crystallization, resulting in a one-way valve ball and seat valve does not work.In the end inhalation metering pump may have a gas leak. Hydraulic end suction side connector may lack O ring or suction valve connection loose.3) flow monitoring and measurement of a high viscosity medium, in the process of liquid delivery received a flow failure signal, how can we solve this problem?Move the hydraulic end by loosening the 4 pump head screws. Rotating stroke length to 10%, and seize the hydraulic end, and then slide out of the screw hole, then the screws do not touch them, but still control the back and diaphragm. Then rotate the component counter clockwise, with a slight resistance, and the diaphragm will loosen from the electromagnetic axis. If the diaphragm is not loose, use some grease on the contact surfaces of the diaphragm and the electromagnetic shaft. After a few minutes, gently tap the diaphragm with a small plastic hammer. Then proceed again in accordance with the above description.
Q:Why is the flow of the pump too small will occur cavitation phenomenon?
Why is it easy to produce cavitation when the inlet flow of pump is lowered?This is because the main performance parameters such as the head, power and efficiency of the centrifugal pump are not fixed, but vary with the flow rate. The curve drawn on a coordinate paper is called the performance curve or characteristic curve of the centrifugal pump. What happens when the flow rate decreases? The disadvantage of throttling adjustment is that the pump flow is small, and the impeller is easy to cause cavitation
Q:Troubleshooting of diaphragm pump
In the application of the pump, these conditions are likely to encounter. Each situation can be divided into several possible reasons. This guide lists the causes of failures and gives appropriate corrective maintenance measures. The meaning of all the specific terms in the guide is listed later.Air valves - copper or stainless steel valves are bolted to the center of the pump by four bolts.The piston aluminum cylinder is enclosed in the air valve to control the gas flow.Cavitation - because the pump inlet for the amount of fluid to reduce or lack, the pump discharge is less than the amount of quantitative. In fact, the fluid chamber is full of fluid before it is discharged.Static pressure drop - the inlet pressure from the pump centerline to the free point - the inlet is measured in pounds, including the specific gravity and velocity of the fluid.
Q:What are the ways of hydraulic pumps?
Check valves, such as single piston pumps, three piston pumps, etc.;The port of the valve arrangement, such as the radial piston pump.
Q:Because the water pressure of the booster pump is not enough, it can not work automatically. It can only be operated by hand. It is inconvenient to use.
One possibility is the automatic type household booster pump used for a period of time, automatic failure phenomenon, it is mainly stainless steel and other metal products in pipes, long-term precipitation to shut off the power supply after unloading, unscrew the top screw, remove the plastic sheet to be cleaned, and then, according to the original reset, the normal debugging. Can be re used. But that's not why if your booster pump isn't working properly all the time.
Q:What happens when a centrifugal pump is selected?
First of all, the performance curve of the centrifugal pump is similar to the track of the train, and the train can not run away from the track.Secondly, the performance curves of centrifugal pump mainly include flow head curve, efficiency flow curve, power flow curve. When the pump is ready, the curve is fixed. In practical application, after determining the flow rate, the corresponding lift head, efficiency and power (relative to density) are determined. General requirements for centrifugal pump operating in the vicinity at the highest point of efficiency, the efficiency of the flow curve is similar to parabola, so if the actual operation condition deviated from the rated point, whether large or small, will cause the decline in pump efficiency (generally rated value is less than 15%), increased operating costs.
Q:What does the pump mortar do?
In order to effectively reduce the flow resistance of concrete and pipe, to avoid obstruction caused by pipe sticking and to achieve normal pumping, and its role is generally only pumps.
Q:What is the pump, how to classify, mainly used in where?
Classification of pumpsAccording to the principle of division:1. displacement pumpDepending on the movement of the work parts, the volume of the work increases periodically and reduces the suction and discharge of the liquid, and the pressure of the liquid increases directly by the extrusion of the working partsAccording to the different movement of moving parts, it can be divided into two types: reciprocating pump and rotary pumpAccording to the structure of the moving parts are different: piston pump and piston pump; there are gear pumps, screw pumps, vane pumps and water ring pump

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range