T8 LED Tube 1.2m 18w 1700lm Three Years Warranty CRI 80 MILKY COVER
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
LED TUBE LIGHT ANY WATTEAGE RA>70 G13 PF 0.9 AC85-265 INPUT VOLTAGE 1800LM GLASS MATERIAL AT USD3 PER PC
LED Tube Light are receiving global recognition for their energy saving capabilities, long service life ,easy installation and the ability to reduce carbon emissions across a host of different sectors.
Specifications of LED Tube Light
GLASS MATERIAL, INPUT Voltage:AC85-265V 50/60HZ
Watt: 9W/10W/12W/14W/18W/20W/22W/24W
POWER FACTOR 0.5- 0.9
Beam Angle：300 degree
LifeSpan :30,000 Hours
2-3 years warranty
CRI :RA>70,RA>80
CCT；3000-3500K,4000-4500K,6000-6500K
Features of LED Tube Light
The LED Tube Light is widely used and are designed and manufactured to replace the traditional grille fixture ,CFL tubes , the superior SMD LED solution and purity Glass material makes the luminous efficacy high to 100LM/W, it is of excellently heat managed by conjoint structure which maintains the LED working temperature in a comfortable condition.
Excellent Heat Sink
Eco-friendly
Energy Saving Perfect Replacement for All Lamp
Blast Free, Starter Free
Applications for LED Tube Light
Replacement CFL for traditional lamp, such as store, supermarket, commerical builing and anywhere
FAQ:
Why choose LED lighting products from CNBM?
Q: What is the Operating temperature?
A: -20 to +40 degree Celsius
Q.What is the Light efficiency ?
A: Upto 100LM/W
Q:What is the starting time of LED Light ?
A: Instant
Q:What is the Power Factor of Led Tube?
A:0.5 or 0.9
Q:What is the CRI ?
A: we offer CRI70, CRI 80
Q:What is the beam Angle?
A:300° beam angle, no dark space
Q:Any Mercury or Radiation or UV ?
A: NO
Q: Are your product IEC satisfied ?
A: YES
Q: How Much Energy It Can Save ?
A:Can save power over 80%
Q: Your Product 100% Real Wattage ?
A: Yes, 100% enough
Q:Which Kind of mount installation you can offer ?
A: Recessed type and Surfaced mounted Type
Q: How Long of Warranty
A: Minimum 2-3 years, and upto 5 years
- Q:Do not have the fluorescent lamp of actuator, how to change LED lamp tube?
- To replace the fluorescent lamp ballasts with constant current power supply LED lamp, the lamp again feet according to the requirement of the tube is connected to the power supply is ok, there are several kinds of LED bulb light foot, according to the actual wiring, general instructions are on the tube.
- Q:Ordinary fluorescent lamp ballast can be replaced with led daylight lamp tube
- In the process, the ballast is torn down, and the two broken wires in the ballast are connected directly to the wire by the color of the broken end wire. Red is red. The other two colors are connected. Remove the regenerator. The broken line between the two ends of the regenerator needs to be reconnected and wrapped in insulation tape
- Q:How does barton fluorescent lamp holder replace led lamp tube
- LED lamp installation has a variety of methods, one of the most common is the old bracket of rectifier and remove the starter, then put in two wires direct access to the ends of the lamp holder.
- Q:Does a fluorescent lamp change an led light to change a light tube only?
- I just finished myself. LED fluorescent lamp 16 watts is equal to the average energy-saving fluorescent lamp 60 tile, very bright. Different brands need to tear down different things, and my home needs to remove the ballast and the regenerator. First, remove the ballast. The end of the ballast is connected by a broken wire in and out of two directions. 2 remove the regenerator and connect the two wires connected to the electrical tape. 3 it will be nice to have a fluorescent lamp that has a brand logo on the side of a fluorescent lamp. It only needs to be modified for the first time. We don't need it in the back. In the future, the light tube will be broken and the tube will be replaced.
- Q:The reason for the slow start of an old-fashioned daylight tube
- The regenerator is a light that USES neon to discharge heat and causes the two metal plates to close, and then it takes time for the contact to turn off when it is cooled.
- Q:The LED light bulb is more efficient than the daylight lamp
- In the same power, it's more efficient.I hope my answer is useful to you.
- Q:The two ballast that originally was electric inductance towed three ordinary fluorescent lamps, now changed to LED fluorescent lamp tube, have influence?
- The impact is certain, and it wastes electricity. It is expected to waste about 12W of power, and if it is powered by a capacitor, it will also greatly affect the brightness.
- Q:Fluorescent lamp double lamp tube wiring method
- Is ok, if the electronic ballast, take a look at is a of the area, or area of two, if is one of the region, the four lines of the same light foot directly connected to the ballast end (the end of the four terminal) ballast directly connect the power cord is ok, on the other side of the ballast area 2, the light of the light feet a line connected to the ballast, on the other side of the ballast connect the power cord is ok!!
- Q:The energy-saving device installed on an old-fashioned daylight lamp is similar to the lighting in the university library, where lights are illuminated and the lights go out
- First, we need to improve the efficiency of the light source. It's the same electrical input, higher light output. It is recommended to use the high efficiency electronic rectifier petri-color lamp tube. Old fluorescent lamps are often turned on and the tube is easily broken. Then is installed at the bottom of the light sensors (infrared), people come to the light, people go out, and can be set up under the condition of brightness (natural) enough, also won't turn on the light (light), the maximum energy saving. My company can do it, but it's a long way. You can also provide products directly to you, and installation is simple. The sensor is integrated, simple to install, and a direct replacement for high-efficiency fluorescent lamps.
- Q:What about the quality gap between leds?
- First, the radiator: the heat of the radiator slowly decides the light of the light to fall. Second, power drive, power driven quality determines the whole life of the lamp bead, light bead almost all does not matter, but once the driver with the inferior, the LED fluorescent lamp is easy to burn out. The difference between light and light is that light is weaker than normal. Third, bead light, chip, encapsulation skill determines their price is different, different customers care about lamp bead size is 2835352 or 3014, you really should care about is the chip size and manufacturers. There are several reasons for the gap
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
T8 LED Tube 1.2m 18w 1700lm Three Years Warranty CRI 80 MILKY COVER
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
