PVC Pipe System for Sewerage and Drainage Pipe

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT or LC
Min Order Qty:
2000 m
Supply Capability:
50000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Description of PVC Pipe :
Material: Virgin Rigid PVC resin, no recycle material
Process: vacuum forming extrusion
Color: various colors, we can make color according to Panton card No.
Quality Standard: Smooth surface, no spot, no shrink mark, no surface quality defect.Check from cross section, homogeneous in density, good plasticizing degree, relative chemical/physical property meet customer requirement. We supply different environment protection products to meet different market requirement.
Back working procedure: precise length cutting, drilling/slotting/punching, gold stamping, quality inspection, cleaning, assembling, and packing.

 

2.Features of PVC Pipes :
1)  Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2)  Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.

 

3.PVC Pipe Images:

 

4.Specifications of the PVC Pipe:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white  pvc pipe, grey  pvc pipe , etc.
4) Specific Gravity:g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature: (C)  >=79
6) Longitudinal Reversion: %, 150(C) <=5< span=""><>
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test: TIR, %, 0(C) <=10< span=""><>
9) Tensile Yield Strength:  Mpa >=40

5.FAQ 
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is there an easy way to remember the color tubes (phlebotomy) and what test they are needed for?
Phlebotomy Color Tubes
Q:mossberg 500 tube spring sticks on last shell?
The tube will unscrew, but not easily the first time it comes off. When the mag springs in our department Mossbergs get tired, we replace them with Remington 870 mag springs and they seem to hold up better. Field strip the shotgun. Put the end of the mag tube in a vise and clamp down ONLY on the little rectangle on the end of the tube (NEVER on the tube itself). Insert the wooden handle.of your hammer into the receiver as close to the barrel mount as you can. Evenly as possible rotate counterclockwise. Remember, it's not going to come off easily. When it lets go, remove the tube, the follower and the spring. Do not try to just stretch out the spring a little. It won't work. Replace the spring and put the follower back in. put the tube back on the receiver. I find it easier to push the follower into the tube a little until you get the threads started. be careful not to crossthread. tighten it up the same way you took it off.
Q:Light enters a solid tube made of plastic having an index of refraction of 1.69. The light travels parallel to?
Hello The angle for total internal reflection is Θc = arcsin(n2/n1) in the case where n2 = 1 (air) Θc = arcsin(1/1.69) = 36.27° -- ans. this is the angle with the normal of the surface. The angle that you are asking for is 90°-Θc = 53.73° ---------- in the case where n2 = 1.333 (water) Θc = arcsin(1.333/1.69) = 52.06° and Θ = 90 - 52.06 = 37.94° -- ans. Regards
Q:Will the bigger breed of hamsters fit in a tube cage?
Syrian hamsters, the larger breed of hamster, can outgrow the tubes and get stuck. Dwarf hamsters are better suited for those types of cages. If you're interested in a syrian hamster, a large, basic wire cage is probably a good idea. A bin cage is also a good cage to have for hamsters.
Q:what does the 1/4 plastic tube running from the cold water tap into the cement floor in the basement do?
could be a trap primer. If you have a floor drain in the basement floor, this line trickles water into the trap under it so it wont dry out, keeping the sewer gasses in check. If no floor drain then I dont know either!
Q:Plastic pipes have steam, how to handle dry?
We like PC plastic pipe is the use of air blowing dust, water vapor will suggest that you try the effect
Q:There is a plastic tube under the motorcycle
It doesn't matter. It's oil and gas
Q:I need to fix a leaky bathrm. sink. It's directly underneath the sink, and is a plastic tubing.?
its one of the water supply lines it is easy to fix first turn off the water to the sink it should have a valve you turn clockwise to turn the water off get an adjustable wrench which you can get from any home depot type store use the wrench to remive the line the top one may be tricky because of the small area and you might can get it with your hand just have to see what works also get a pair of small channel lock type pliers to help with the line disassembly and then take the line to home depot and they can find one that will work then put it back together like you took it apart and turn the check for leaks
Q:theres a game, it's a plastic tube filled with beads and they're objects in it and you shake it 2 find them?
I don't actually know of a place that sells them. I have had one made for me here is wat they did.... What you need... An Empty water/soda bottle (remove the wrapper logo thing) Some Sand 10 or more little objects that will fit in the bottle to be found A piece of string and a list of the items you put in the bottle. Ok take the bottle and put some sand and a few items shake it up and keep doing that until it is full... make sure you write down all the items you put in... the super glue the cap on... the punch a hole in the list and put the string through it and tie it around the neck of the bottle. There you go you got one that means even more because you made it.
Q:i am having trouble fitting my RC nitro antenna through the plastic tube.. what to do??
spray glass cleaner in the tube and the antenna will slide in easily

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range