PVC Fittings Made in China on Sale with Good Quality
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 30000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specification
1. Length: 6m, 12m or In compliance to your requests
2. Pipes are available in the form of coils or straight lengths
3. A comprehensive range of pipe fittings are always held in stock.
2.Packaging & Delivery
Packaging Detail: | standard packing for export or as requested |
Delivery Detail: | 1~5weeks |
3.Features:
· Facilitating high resistance to loadings, pressure and vacuum with high tensile strength,
· Enabling high resistance to corrosion,
· Not requiring cathodic protection,
· Less operating cost since cast pipes have larger nominal diameter than polyethylene pipes.
· Being the best pipe in case of an earthquake, with its ability of resilience and resistance to impacts without deformation,
· Long product life, exceeding 50 years,
· Preserving the quality of water with healthy interior coating.
4.size range
Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | Weight(kg/m) | |||
Wall thickness(mm) | Wall thickness(mm) | PE80 | PE80 | PE100 | PE100 | |
Nominal Outside Diameter(mm) | SDR17.6 | SDR11 | SDR17.6 | SDR11 | SDR17.6 | SDR11 |
20 | 2.3 | 3.0 | 0.132 | 0.163 | 0.133 | 0.164 |
25 | 2.3 | 3.0 | 0.170 | 0.211 | 0.171 | 0.212 |
32 | 2.3 | 3.0 | 0.222 | 0.278 | 0.224 | 0.279 |
40 | 2.3 | 3.7 | 0.283 | 0.430 | 0.284 | 0.432 |
50 | 2.9 | 4.6 | 0.438 | 0.666 | 0.440 | 0.670 |
63 | 3.6 | 5.8 | 0.686 | 1.053 | 0.689 | 1.058 |
75 | 4.3 | 6.8 | 0.975 | 1.470 | 0.980 | 1.478 |
90 | 5.2 | 8.2 | 1.411 | 2.130 | 1.419 | 2.141 |
110 | 6.3 | 10.0 | 2.084 | 3.159 | 2.095 | 3.176 |
125 | 7.1 | 11.4 | 2.670 | 4.098 | 2.684 | 4.120 |
140 | 8.0 | 12.7 | 3.347 | 5.108 | 3.364 | 5.135 |
160 | 9.1 | 14.6 | 4.368 | 6.705 | 4.391 | 6.740 |
180 | 10.3 | 16.4 | 5.549 | 8.474 | 5.578 | 8.519 |
200 | 11.4 | 18.2 | 6.817 | 10.451 | 6.853 | 10.505 |
225 | 12.8 | 20.5 | 8.596 | 13.228 | 8.641 | 13.298 |
250 | 14.2 | 22.7 | 10.611 | 16.268 | 10.666 | 16.354 |
280 | 15.9 | 25.4 | 13.274 | 20.396 | 13.343 | 20.502 |
315 | 17.9 | 28.6 | 16.804 | 25.818 | 16.892 | 25.953 |
355 | 20.2 | 32.3 | 21.398 | 32.861 | 21.510 | 33.033 |
400 | 22.8 | 36.4 | 27.164 | 41.706 | 27.306 | 41.924 |
450 | 25.6 | 40.9 | 34.320 | 52.688 | 34.499 | 52.964 |
500 | 28.4 | 45.5 | 42.311 | 65.135 | 42.533 | 65.476 |
560 | 31.9 | 50.9 | 53.169 | 81.583 | 53.447 | 82.010 |
630 | 35.8 | 57.3 | 67.134 | 103.347 | 67.486 | 103.888 |
5.size range (water pipe)
Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | Pipe series | |
SDR11 | SDR13.6 | SDR17 | SDR21 | SDR26 | SDR33 | |
Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | Nominal pressure(bar) | |
PE80 | PN12.5 | PN10 | PN8 | PN6 | PN4 | |
PE100 | PN16 | PN12.5 | PN10 | PN8 | PN6 | |
Nominal Outside Diameter(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) | Wall thickness(mm) |
20 | 2.3 | |||||
25 | 2.3 | |||||
32 | 3.0 | |||||
40 | 3.7 | |||||
50 | 4.6 | |||||
63 | 5.8 | 4.7 | ||||
75 | 6.8 | 5.6 | 4.5 | |||
90 | 8.2 | 6.7 | 5.4 | 4.3 | ||
110 | 10.0 | 8.1 | 6.6 | 5.3 | 4.2 | |
125 | 11.4 | 9.2 | 7.4 | 6.0 | 4.8 | |
140 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 4.3 |
160 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 4.9 |
180 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 5.5 |
200 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 6.2 |
225 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 6.9 |
250 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 7.7 |
280 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 8.6 |
315 | 28.6 | 23.2 | 18.7 | 15.0 | 12.1 | 9.7 |
355 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 10.9 |
400 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 12.3 |
450 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 13.8 |
500 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 15.3 |
560 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 17.2 |
630 | 57.2 | 46.3 | 37.4 | 30.0 | 24.1 | 19.3 |
710 | 52.2 | 42.1 | 33.9 | 27.2 | 21.8 | |
800 | 58.8 | 47.4 | 38.1 | 30.6 | 24.5 |
6.FAQ
Q:What the Raw material?
A:We use 100%Korea material.
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:inner tubes and tire. I'm looking for some advice about what to do next.
- The combination of the protective strip (that you have) and green slime worked for me. The green slime has various names but can be found in most any auto store. It'll seal the tire as the punctures are made. It does dry out in time so may need to be reapplied (through he air intake valve).
- Q:If you have a CPAP machine with a nasal mask, and it is new, does the smell of the plastic make you feel ill? Anyone have this experience, and what did you do about it ?
- You could of course have an allergy to the product, hence the ill feeling when using it. You shouldn't feel that way. Check your manufacturer's manual -- most can be found online if you don't have it -- and see what products you can use to clean it. I use Dawn dishwashing detergent (prefer the green, not the kind with added fragrances or bleach). Soak it a few minutes, rinse, then soak in cold water with a bit of baking soda dissolved. Rinse again. That should get rid of the smell, but don't do it unless the manufacturer approves. Those parts are expensive, and you don't want to completely ruin one. On another note, is the ill feeling from the smell, or perhaps from the force of the air to be inhaled? Perhaps the settings need to be fine-tuned? Don't hesitate to contact the prescribing doctor if you still have questions.
- Q:I purchased a dipstick oil heater and I cannot use it with a plastic tube. I want to make sure I do not have a plastic tube before I use it. Thanks.
- Use a magnetic pan heater, make sure it's not aluminum
- Q:How can the iron pipe be joined to the plastic hose?
- If it is 2 inches below the pipe threaded joint can be connected, if large flange connection is used.
- Q:How are plastic tubes cleaned?
- Plastic tubes are typically cleaned by rinsing them with warm water and mild soap or detergent. They can also be cleaned using a cleaning brush or by soaking them in a disinfectant solution.
- Q:I'm Assistant Directing a production of Hairspray! and need to find a piece of tube that a person can stand inside of for the Giant can of Ultra Clutch Hairspray. We thought to use huge cardboard tubes from Home Depot but the largest size they had was only 1' diameter. Corrugated plastic tubes wont work, it needs to be smooth like PVC or cardboard. A wood tube would be okay too
- Sonotube commercial concrete forms might have something that big. You can call them toll free at 888-766-8823 and find the name of the local distributor.
- Q:If you had 32 plastic test tubes, what would you use them for?
- test tube babies! cheap to feed, easy to look after, just like sea monkeys only human lol
- Q:Can plastic tubes be transparent?
- Yes, plastic tubes can be transparent.
- Q:the gun works great...until i go to elevate the last shell into the chamber, the plastic cup that seats against the crimps of the shell sticks just enough into the tube to not fully push the shell out and onto the elevator, the spring feels a bit week also, are these springs known for wearing out and are they replaceable? looks like the shell tube has large threads that screw into the receiver but ill be damned if i cant get that thing to twist and unscrew!
- The tube will unscrew, but not easily the first time it comes off. When the mag springs in our department Mossbergs get tired, we replace them with Remington 870 mag springs and they seem to hold up better. Field strip the shotgun. Put the end of the mag tube in a vise and clamp down ONLY on the little rectangle on the end of the tube (NEVER on the tube itself). Insert the wooden handle.of your hammer into the receiver as close to the barrel mount as you can. Evenly as possible rotate counterclockwise. Remember, it's not going to come off easily. When it lets go, remove the tube, the follower and the spring. Do not try to just stretch out the spring a little. It won't work. Replace the spring and put the follower back in. put the tube back on the receiver. I find it easier to push the follower into the tube a little until you get the threads started. be careful not to crossthread. tighten it up the same way you took it off.
- Q:I have a Katadyn Vario pump for camping and haven't used it in eons (7 years or so) and I took it apart to clean it.For now, and for future reference, how can I clean the actual intake/outlet plastic tubes? The inlet tube is inserted into gross pond/lake or running stream water, so it's already contaminated. I would love to be able to wash this tube for SURE, safely at home.(The O-rings are still well-lubed, and I've ordered new activated carbon to refill the glass fiber filter.)
- Here is what the manual says; Between trips, run a liter of water with two teaspoons of household bleach through the pump. Pump the unit, remove the cartridge from the housing, dry and store. Before next use, pump a liter of fresh water through the system to flush. See use-and-care manual for field tips and detailed instructions.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Fittings Made in China on Sale with Good Quality
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 30000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords