PP-R Type Hot Melt Copper Core Ball Valve Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Packaging Details:
1. Large carton:515x400x220 Cubage:0.04532 M3
Small carton:390x255x250 Cubage:0.0248 M3
2. PE poly bag+ cartonDelivery Detail: 15 days/ 20" container; 25 days/ 40HQ
Our Advantages:
1) Convenient and reliable installation, low construction expenses
2) Excellent heat-insulation property from minimum thermal conductivity
3) Lightweight, convenient to transport and handle, good for labor-saving
4) Smooth inner walls reduce pressure loss and increase flow speed
5) Sound insulation (reduced by 40% compared to galvanized steel pipes)
6) Light colors and excellent design ensure suitability for both exposed and hidden installation
7) Recyclable, environment-friendly, accords with GBM standards
Applications:
> Distribution for cool and hot water;
> Duct for drinkable water system;
> Pipes for kinds of high-temperature and low-temperature heating system;
> Pipes for heating and coolling settings in solar energy system;
> Connecting pipe for air conditioners.
Service:
1. Samples are free;
2. Reponses timely and best service;
3. High quality and with a strict quality control system;
4. Control delivery date;
5. Best service provided when u have any questions for our products;
6. Using raw materials with good quality.
7. Competitive price will be provided if you want to buy them and etc.
Do not hesitate ,just action now!!!
FAQ:
Q: How about your capacity?
A: Annual exports about 13,000,000USD in 2014
alum equipped 130 CNCS, 10 multi-rotary CNCs, 6 hot forging machine,
6 lean production lines.220 Workers .Cover 5097 square meter .
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
We also have "Product Liability Insurance" in USA&CANADA.
Q: When can I got an feedback If I send an enquiry at your website?
A: We will reply you with details immediately or within 24 hours.
Welcome your Questions , We will be glad to answer you.
- Q:Can you eat coloured icy poles in the plastic tubes with braces??
- Sure, just make sure to brush your teeth after to get rid of the sugar from the pops.
- Q:Can plastic tubes be used for personal care products?
- Yes, plastic tubes can be used for personal care products. They are commonly used for packaging and dispensing various personal care items such as toothpaste, lotions, creams, gels, and serums. Plastic tubes are lightweight, durable, and offer convenient and hygienic application of these products.
- Q:Can plastic tubes be used for pneumatic valves?
- Yes, plastic tubes can be used for pneumatic valves. Plastic tubes are commonly used in pneumatic systems as they offer various advantages such as being lightweight, flexible, and resistant to corrosion. Additionally, plastic tubes are less expensive compared to metal tubes, making them a popular choice for pneumatic applications.
- Q:Can plastic tubes be used for paint or adhesive packaging?
- Yes, plastic tubes can be used for paint or adhesive packaging.
- Q:The dishwasher behind my bar at work has a leak. The pipe that's leaking is Parker Parflex PP 3/8 plastic tubing that connects into a metal nut and brings clean water in. The pipe has a leak exactly where it meets the nut, so in theory I could cut off the cracked portion and then re-seal it to the nut. Can I cut it with wire cutters? Should it be sanded after I cut it? Do I use a teflon sealant? Thanks for any help!
- That should be a compression fitting. If it's a brass fitting then they are one time use. You can get a new brass fitting, cut the PP tube clean with a knife or a razor blade - be careful not to cut yourself please, then install the nut over the tube, slip the compression ring over the tube and if there's an insert that goes inside the PP, insert that. Then push the hose into the fitting and slide the nut and ring to the threaded portion of the fitting and tighten it. Be careful to tighten it enough to seal but not so tight you cut through the pipe again. It's likely the reason you have the leak in the first place is because someone overtightened it. OR you can simply buy a replacement hose. I'd prefer a wire braid shielded pipe. Stronger and made with a professional fitting on the end, one you don't have to mess with. My opinion, replacing the tube is the better idea. And they're not stupidly expensive either. Good luck with your project. '')
- Q:What's the diameter of the white plastic tube in the kitchen, about 10cm? What should I do if the water leaks?
- Electrode welding: buy several PVC welding electrodes to the building materials shop or hardware city, and weld the welding rod to dew point with hot blast welding torch.The above two methods must first wipe the dew point, no water, and within 12 hours after the repair and repair, the water pipe shall not be used.
- Q:Do plastic tubes have any limitations in terms of clarity or transparency?
- Yes, plastic tubes do have limitations in terms of clarity or transparency. While many plastic tubes are designed to be clear or transparent to some extent, they may not provide the same level of clarity as glass or other materials. Some plastic tubes may have a slightly hazy or cloudy appearance, which can affect the visibility of the contents inside. Additionally, certain plastics may become discolored over time or when exposed to certain chemicals or UV light, further affecting their clarity. However, advancements in plastic technology have led to the development of highly transparent tubes that offer excellent clarity.
- Q:I have a fairly old A/C unit in my home. Thanks to my lovely new puppy's curiosity a white tube running from the unit into the house is now broken. It appeared to be a plastic tube about an inch or so in diameter. What is this tube for and what would be the easiest method of repairing it? It is broken clean off and there is now about a 10-14 inch piece missing.
- Nothing to worry about..thats a condensation tube for over flow of a little water....it can drain off in the yard...that other answer is crazy about freon mixing with water!!!
- Q:Are plastic tubes suitable for industrial automation?
- Yes, plastic tubes are suitable for industrial automation. They offer various advantages such as being lightweight, flexible, and resistant to chemicals, which makes them ideal for use in automated systems. Plastic tubes can be easily integrated into robotic arms, conveyor belts, and other automated machinery, providing efficient and reliable transport of fluids, gases, or other materials in industrial settings.
- Q:Im looking for some hard plastic tubes like pvc, but clear about 3 ft in length. Any stores that might have something like that?
- walmart mabey
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PP-R Type Hot Melt Copper Core Ball Valve Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
