LED T5 Integrated Tube SMD Chip High Efficiency 0.9M 12W

Ref Price:
$8.65 / pc
Loading Port:
Shenzhen
Payment Terms:
TT
Min Order Qty:
10 Pcs pc
Supply Capability:
100000 Pcs Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

LED T5 Integrated Tube SMD Chip High Efficiency 0.9M 12W 1. This product meets the standard of CE certification.
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2863 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How is the T8LED fluorescent lamp installed?
If it is old fashioned, you must cut the input of the ballast and install it as shown below.
Q:The difference between an LED tube and a daylight lamp
Traditional fluorescent lamps generally cannot choose color temperature, and color. LED bulbs have a choice.
Q:Ordinary lamp tube is replaced by the led for video
 tear down everything on the shelf, (one of them is a spin-off: the regenerator, and the inductor, the other is an open circuit board). 2: take the 220V line of communication. Another: LED tube at both ends of two light feet are interlinked, so on the bracket in the line, as long as the wire and zero line in both ends can be respectively, each side there are two shell inside, which one can be
Q:A 30-watt light bulb can be used for a change of LED lamp
The fluorescent lamp bracket some trouble, generally in the power of the led lamp is generally in 18 w 9 w, 600, 36 w in 18 w, 1200 long, 30 w words should be in 12 or 15 w, do you want to make sure the tube length.
Q:Is the normal daylight tube replaced by an LED line
Step 1: use a screwdriver and a pliers to disconnect the ballast from the wire. But my home is the sun lamp base of zhengtai, the quality is too good, it took 10 years. I didn't even get down to the ballast, which was stuck in a full thick iron base, so I disconnected the wire. The wire that disconnects from the ballast is sure to have two heads, just to disconnect the connection. There is a lot of direct skewers of black tape, some of which use that connector and screw the two wires together. It's the same thing. This is the connector that is used in this case. Disconnect the regenerator, remove the wire and then rewire the two broken wires together and attach the black tape (which is the insulating tape). Put the base back to the original. Install the fluorescent tube, and remember to place the head of the European logo on the base of the current. And when you put it in place, it's going to be OK.
Q:How does barton fluorescent lamp holder replace led lamp tube
LED lamp installation has a variety of methods, one of the most common is the old bracket of rectifier and remove the starter, then put in two wires direct access to the ends of the lamp holder.
Q:How to replace old lamp tubes with LED tubes
LED fluorescent lamp, does not need a ballast, regenerator. Simply remove the ballast from the traditional fluorescent lamp holder, and then install the LED fluorescent lamp.
Q:What are the details of the whole process of the LED lamp?
LED lamp tube application CE certification, notice two aspects 1, sample selection, had better be to isolated power supply, power supply aspects need separate power supply L/N line at one end of the input, and weight requirements, should not exceed 500 g is 1.5 meters. It is difficult to meet the weight requirement by more than 1.5 meters. For other details, look at specific products and specific analysis. There are specific tests, detailed analysis... 2, the detection organization's choice. There are international authorities such as TUV, ITS, etc. Customers have these special requirements. According to customer's requirement. It is best to choose domestic CNAS. , Note: in March 2013, LED lighting was added to EN 62493: test standards for 2010, enforcement.
Q:What is the 1.5-meter LEDT5 daylight lamp tube
It may also be used at the counter, which is about 1.5 meters in length. Actually, the only thing you can do is change the length when you drop the material. I make the special LED fluorescent lamp, the length is 1.9 meters. 2.5 meters and 2.8 meters, 1.5 meters in pediatrics. Ha ha
Q:What is the reason for the movement of light in the tube
Lamp tube problem, get a hot towel tube to wipe, sometimes can solve.
Focus on environmentally friendly LED intelligent lighting products are obtaining CE, ROHS, CCC and other domestic and international authoritative certification; product sales in the domestic market to maintain continuous growth, and exported to Europe, America, Southeast Asia more than 10 countries.

1. Manufacturer Overview

Location Shenzhen,China
Year Established 2011
Annual Output Value
Main Markets

Mid East;Western Europe
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Dongguan
Export Percentage
No.of Employees in Trade Department 50-100 People
Language Spoken: Chinese
b)Factory Information  
Factory Size: Above 1,500 square meters
No. of Production Lines About 5
Contract Manufacturing OEM Service Offered;Design Service Offered
Product Price Range Cheap