Q:Balcony wash basin basin faucet high

This is based on the style of your choice of faucet and basin style to decide.

Q:Kitchen pots hot and cold faucet water hose connector how to unscrew? Nuts in the deeper position of the valve body, wrenches and stretch does not go, hand screw is not OK, too tight. Is the faucet with the hose connection joints, can only cut? Leading water leakage to change it. What tools are there?

1, a small live wrench, a flashlight, 2, drill into the basin below the table, the body off the table below the pot, 3, with a torch to illuminate the water pipe joints. 4, one will be the faucet clenched, do not loose, 5, under the pot will be the end of the wrench stuck in the hose at the end of the screw in the tap, adjust the size to the clamping nut, 6, counterclockwise rotation nut Times less rotation), you can remove the water hose.

Q:Three-hole basin and single-hole basin can be installed single hole faucet it

Can be three holes in the installation of a single hole when you can go to OKorder to buy a rectangular decorative cover can cover the left and right to cover the hole on the exposed hole so that the installation of a single hole faucet up is beautiful!

Q:how necessary is a reservoir wrench when installing a new faucet?

Since there is no such thing, not very important at all. If you mean a basin wrench (such as what is in the provided link), though not *necessary* it can (in some circumstances) make installation much easier. Al

Q:Hot and cold faucet how to take water pipes

Requires a solid, because the kitchen faucet high frequency, coupled with being moved to move, easy to loose, so the lock nut must be tightened. At present, the market appeared some of the leading screw for the nut to increase the fixed, this solid effect is very good, if you can solve the problem of water to pull, the future will be a popular trend.

Q:Understand basin faucet installed?

Understand the basin to use the glass glue to be mildew, the installation is more complex to do the basin of the stent and the table of the bracket, the location of the location of the hole to be fixed is the best round.

Q:Double hole basin faucet and single hole faucet What is the difference

Two-hole basin faucet, handle and outlet are split, the basin or table requires two mounting holes, some double-hole basin faucet will require a fixed pitch. A single cold or single hot water, or hot and cold mixed water, depending on the valve with the valve is a quick open valve or mixed valve, with a single hole is not necessarily related.

Q:Bought a bathroom counter basin combination. Ready to buy their own lead, suddenly found the leader has a radius of a said. What the European standard GB. , Whether it can only be used

Actually is the interface caliber

Q:It stopped working out of no where so the only way i can use my kitchen sink is to use the hand held spreyer.. I have never replaced one before and wasnt sure if i need to turn off water to the whole house or not...

you can just turn the valves off but i suggest since you are doing this, go ahead and replace the valves and drain lines too. if you replace the valves, yes, turn the water off at the street. when i replace faucets, and if the money is there, i always suggest replacing everything. (i hate old leaky valves) use those 1/4 turn on/off valves too!

Q:I purchased a new faucet with sprayer. Currently I have a faucet but no sprayer.next to where the sprayer should go, there is a overflow for my dishwasher. Do I need to drill another hole or do I need to do something with the overflow ?

The overflow is there so that if your kitchen sink clogs then it does not fill up your dishwasher with nasty sewer water. If you take the overflow (called an Air Gap) out then you would have dirty nasty water going into your dishwasher with your dishes. You can drill a hole in the sink but I warn you that this is difficult to do. I would recommend purchasing a pull out sprayer faucet. It's more costly but will save you the trouble of drilling a hole. They also make faucets that have the sprayer hole built in to the body of the faucet but this looks a little weird. If you get the pull out sprayer then you will like it and it looks nice too. So, just shell out a little more money and get a good faucet that looks good too!