High Alumina 0-1mm 1-3mm 3-5mm Calcined Bauxite Granular for Road Making

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
111 m.t
Supply Capability:
11111111 m.t/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

1.Structure of Calcined Bauxite Description

Bauxite (aluminous soil; Bauxite) is also called the alumina or bauxite, main ingredients are alumina, hydrated alumina containing impurities, is an earthy mineral. White or gray, brown and yellow or light red by iron.  From 4 to 3.9 g/cm3 density, hardness, 1 ~ 3 is not transparent, very brittle.  Very difficult to melt.  Insoluble in water,  soluble in sulfuric acid, sodium hydroxide solution. Mainly used for aluminium, refractory material. 

 

2.Main Features of the Calcined Bauxite

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum

hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there.By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns. 

3.Main usage of the Calcined Bauxite

(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc. 
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department. 
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties. 
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries. 
(5)  in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects. 
(6)   manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.

 

4. Calcined Bauxite Images

 

High Alumina 0-1mm 1-3mm 3-5mm Calcined Bauxite Granular for Road Making

High Alumina 0-1mm 1-3mm 3-5mm Calcined Bauxite Granular for Road Making

5. Calcined Bauxite Specification

 

 

Al2O3SiO2

Fe2O3

CaO+MgOK2O+NaODensityTiO2
80%6-14% min2%-3% max0.4% max0.05-1% max2.9-3.23.5% max
85%6-14% min2% max0.4% max0.05-1% max2.9-3.23.5% max
87%6-14% min2% max0.4% max0.05-1% max2.9-3.23.5% max
88%6-14% min2% max0.4% max0.05-1% max2.9-3.23.5% max

 

6.FAQ of Calcined Bauxite

1). Q: Are you a factory or trading company?

A: We are a factory.

2). Q: Where is your factory located? How can I visit there?

A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!

3). Q: How can I get some samples?

A: Please connect me for samples

4). Q: Can the price be cheaper?

A: Of course, you will be offered a good discount for big amount.

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How much modulus is used as refractories material of sodium silicate.
Storage and use are very convenient, especially for mechanized and the evenly refractory material and the sodium silicatemodulus is generally...2. transportation. The appearance of product is pure white. Instant powdered sodium silicate, also known as instant sodium metasilicate.4 to 3, in powder form, automation. in the range of 3, hydrated sodium silicate
Q:Is there vermiculite in refractory?
Paint, small thermal conductivity, chemical, shipbuilding and other industries. Expanded vermiculite has excellent electrical insulating property, and it is stratified structure. It is a good thermal insulation material used in growing seedings, flowers and trees, bulidings, rubber and smelting. I hope my answer will make you satisfied. Refractory contains crystal water and board between its layers. For example, the interlayer of fireproof door contains expanded vermiculite, and after expansion, its specific gravity is 60-180kg& # 47. Electric insulation material. Expanded vermiculite is widely used for thermal insulation material and sealing material. Of course, some refractory also uses vermiculite; fireproofing material. Vermiculite is a good refractory material, whose maximum using temperature and unit weight can be repsectively up to 1,100 ℃ and 50-200kg/m3. When it is expanded, it is called expanded vermiculite. It is highly thermal insulated. Hard water softeners and paint. After unripe flake vermiculite is roasted in high temperature, its volume will expand 6- 20 times quickly. Friction materials, its volume can be quickly expanded several times to dozens of times. In addition. Quality expanded vermiculite
Q:How to distinguish the fire resistant level of the rubber and plastic thermal insulation material?
Fire rating grading of external wall thermal insulation materials. 1, China's national standard GB8624-97 divides the combustion performance of building materials external insulation materials into the following grades. Level A: Incombustible materials: Almost no burning materials. Level B1: Incombustible materials: Flame-like material has good fire-retardant effect. In case of fire in the air or at high temperature, it is difficult to fire and doesn't spread quickly, and when the fire source is removed after combustion, it stops immediately. Level B2: Incombustible materials: Combustible materials have a certain flame resistance. In case of fire in the air or at high temperature, it will immediately burst into flames, and easily leads to the spread of fire, such as poles, wooden frame, wooden beams and wooden stairs,ect. Level B3 : Incombustible materials: No flame-retardant effect, hidhly flammable and high fire risk. 2, The external wall thermal insulation materials could be divided according to the fire rating. 1) thermal insulation material that has the level A combustion performance: Spraying inorganic fiber, glass wool, foam glass, ceramic foam, rock wool, foam cement and perlite obturator, and so on. 2), The thermal insulation material that has level B1 combustion performance: Special processed extruded polystyrene board (XPS) / special processed polyurethane (PU), phenolic and polystyrene powder. 3), Thermal insulation materials that have level B2 combustion performance: Molded polystyrene board (EPS), extruded polystyrene board (XPS), polyurethane (PU), polyethylene (PE), etc.
Q:how to divided the external wall thermal insulation materials fire rating
Level A: Incombustible building material is a material that does not occur any burning. Level A1: Noncombustible means no open fire. Level A2 It is noncombustible, and should measure smoke to be qualified. Level B1: Nonflammable building material: Non-flame material has good flame resistance. It is difficult to fire under the condition of open fire in the air or high temperature, and it is not easy to quickly spread, and when the combustion source is removed, the combustion will stop immediately. Level B2: Combustible building materials: Flame material has a good flame resistance. In case of fire in the air or at high temperature, it will immediately burst into flames, and easily lead to the spread of fire, such as wooden column, timber roof truss, timber beam and wooden stairs. Level B3: inflammable building material has no any flame resisting effects, and is easy to burn, so the fire risk is high.
Q:Manganese steel belongs to refractories
NO!
Q:What's the B grade fireproofing material?
Grade B: rubber and plastic, extrusion molding, polyphenyl, PEF. organics, extruded sheet, polyphenyl board, phenolic resin. Hairong modules (thermal insulating and fireproof material) can reach grade B1 in fireproof performance.
Q:How should refractory cement be used?
Insulation fire mortar: It is used as a protective refractory layer in the kiln head burner, as a refractory material in some parts of preheater, and it is generally constructed by grouting. b: Insulation fire mortar: It is used to repair the deformed plane of the kiln shell, or for thermal insulation of the roof in the cooler. Refractory mortar: It is also known as thermosetting fire mortar, mainly used in brick masonary. When using, we must add the glassy water to stir. (silicic acid sodium, water, NaSiO3, H2O).
Q:Who knows the new fireproof and thermal inuslation matertial?
Ceramic foam insulation board, XTP vacuum insulation panels and a variety of composite insulation panels, etc. Relatively speaking, the inorganic insulation board is a trend. In terms of the overall performance, the cost performance of the foam insulation board is higher. XTP has the best performance, but with a little trouble in construction. Because of the vacuum characteristics, transportation and installation process should be very careful.
Q:What requirements should refractory materials meet?
Ladle is an necessary equipment to undertake molten steel and continuous casting. As many kinds of steel needs to be processed in the ladle, including argon blowing tempering, alloy composition fine-tuning, refining dusting and vacuum processing, working conditions of the ladle lining have worsened. Their working conditions are as follows. (1) The temperature of molten steel is higher than mold casting ladle. (2) the molten steel stays longerin the ladle. (3) ladle lining are subjected to volatilization and agitation of molten steel under high temperatures and in vacuum. (4) The impact on the lining when undertaking steel liner when the impact effect. Therefore requirements of the ladle refractories are as follows: (1) It can resist high temperature. Molten steel should be able to withstand high temperatures without melting. (2) It can resist thermal shock and can withstand molten steel without cracking and spalling. (3) It can resist slag erosion. The ladle should be able to withstand the erosion of lining caused by slag and alkalinity changes of slag. (4) it should have sufficiently high temperature mechanical strength to withstand the agitation and scouring of molten steel. (5) lined should have certain swelling property so that lining will be united as a whole under the effect of hyperthermal molten steel.
Q:Graphite and other carbon materials may be oxidized to CO or CO2 at high temperatures. But why can they be refractories?
There is no contradiction for this. Any substance can be combustible, but different materials have different ignition points.There are many types of graphite. Pyrolytic graphite has a much lower ignition point. Therefore, as long as it reaches at a certain temperature, it can convert into graphite. Mostly, in practical applications (such as brake pads will add a certain amount of graphite), graphite is required to have refractoriness of below 1000 ℃. Graphite can serves as both the combustible and refractory material. So, it can be used as a fire-resistant and high-temperature-resisrant material because graphite (lamellar graphite) has a ignition point of at least 3000 degrees in an oxygen free condition. The above information is for reference only and is offered by Xin Ruida Graphite Company.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range