GTJZ0608A/GTJZ0808A Narrow
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Brief Introduction
GTJZ scissor lifts can travel at high speed and low speed with self propelled functions. Only one person is needed to operate the machine to carry out raising and lowering, forward and backward, and steering actions. Working efficiency is highly improved due to the traditional hydraulic platform, which can greatly reduct man-power and labour intensity. It is especially valuable for continuous aerial work at airport terminals, stations, docks, shopping center, stadiums and workshops, etc.
Specification
Model | GTJZ0608A | GTJZ0808A |
Size | ||
Max. working height (m) | 7.9 | 9.7 |
Max. platform height (m) | 6.1 | 7.9 |
Platform length (m) | 2.45 | 2.45 |
Platform extension (m) | 0.8 | 0.8 |
Platform width - Outside (m) | 0.8 | 0.8 |
Guardrail height (m) | 1.1 | 1.1 |
Toeboard height (mm) | 150 | 150 |
Height (m) | 2.2 | 2.3 |
Length (m) | 2.45 | 2.45 |
Width (m) | 0.81 | 0.81 |
Axle base (m) | 1.85 | 1.85 |
Ground clearance (mm) - centre | 60 | 60 |
Pothole guard clearance (mm) | 20 | 20 |
Performance | ||
Capacity (kg) | 300 | 220 |
Extension capacity (kg) | 100 | 100 |
Drive speed - stowed(km/h) | 2.7 | 2.7 |
Drive speed - raised (km/h) | 0.54 | 0.54 |
Gradeabilit - stowed | 25% | 25% |
Turning radius – inside (m) | 0.67 | 0.67 |
Turning radius – outside (m) | 2.4 | 2.4 |
Lifting / Lowering speed (m/s) | 0.13 | 0.13 |
Controls | DC Proportional | DC Proportional |
Drive | 2WD | 2WD |
Tire (mm) | Φ400 x127 | Φ400 x127 |
Power | ||
Voltage | 24V | 24V |
Electromotor power (kW) | 2 | 2 |
Hydraulic tank volume (L) | 22 | 22 |
Machine weight (kg) | 1800 | 1850 |
Certification | CE | CE |
- Q:Should we destroy and ban as much technology as we can. Anything that didn't exist before 1800? As anyone literate in weaponry would know that bows and arrows accompanied by a personal choice of knife, sword or hatchet are far more effective than the muskets and blunder busters in real warfare.
- No. In fact, the government should lay off my enriched uranium. I have absolutely no freedom and it's clear we have a fascist government because they won't let me stockpile enriched uranium. If you outlaw home-made nuclear devices, only outlaws will have home-made nuclear devices.
- Q:What is the management of construction machinery?
- (2) carry out the registration of construction hoisting machinery, equipment and use, and be responsible for implementing the notification system for construction departments and their safety supervision institutions;
- Q:What are the large machinery in the construction project?
- Hoisting machinery, such as tower cranes, self-propelled cranes, mast cranes, clamshell cranes, etc.. Compaction machinery such as tire roller, smooth wheel roller, single foot roller, vibratory roller, tamping machine, tamping machine, etc..
- Q:We have an old furnace, among other machinery, that is in need of removal for space purposes. It's not in current working condition (though it probably could be made to be so). Is there a place to post this or call to get rid of it? I'm sure the scrap metal value is worth a considerable amount, but I just want it out. Greenville, SC, if that makes a difference.
- put it on craigslist for free or a small price
- Q:Hello! We are a firm located in Nasik, India. A company from Texas, USA wants to buy 4 of our used machines and transport them to the USA. My questions are:What is the procedure to be followed for this purchase? What all documents or agreements need to be signed? Do we need Law signatures on the purchase agreement both from India and USA or just any one?Your replies are appreciate.
- 1. The question has an Exchange Control angle, apart from other things. The shipping documents have to be rounted through a bank in India(authorised dealer in foreign exchange). Remittance from USA to India will also have to be routed through a bank(authorised dealer in foreign exchange). 2. A bank, being an Authorised Dealer in Foreign Exchange (SBI, BOI, BOB, ICICI Bank, HDFC Bank, etc., etc.) will give necessary guidance in the matter, including the documentation part. 3. Reserve Bank of India has delegated many powers under Foreign Exchange Management Act to Authorised Dealers in Foreign Exchang (banks). 4. Please visit a bank and enquire. .
- Q:Electrical machinery,Is there any one to answer to my question about electrical machinery?? Thanks alot;)
- whats the question??
- Q:I have never dealt internationally before and am a little leery about doing so. The seller looks legitimate but how can I be sure? Is there a way to check if there were problems with their machines, quality issues, etc?
- Contact their nearest Embassy they will have a Trade Commissioner you can discuss it with. Contact your own Government somewhere you will have a Trade Department. Both these can do checks on your behalf for free. QUALITY 1: Ask for some references where they have sold their Machines etc, then check up on them. QUALITY 2: If you are dealing with Asia most don't know what quality is and will openly lie to you, especially China. Did you know over 50% of Chinese Toy manufacturers this year went out of business because of Quality problems? Believe me it is a problem in most of their manufacturing industries.
- Q:Christians : Manual Harvest or machinery Harvest ,which do you encourage ...!?
- The preacher wants somebody else to harvest so he can reap!
- Q:What's the difference between an automatic watch and a mechanical watch?
- The power source automatic mechanical watch is a shaking table, worn on the hand, people on the move is inevitably affected by vibration, the table has a collection, conversion to mechanical vibration rotational energy of the table, worn on the hand if it hasn't been tightened spring by the shock will be automatically wound, if you leave the table put in place without vibration generally within 24 hours it stopped. The disadvantage of this kind of automatic mechanical watch is that it is much thicker and thicker than the ordinary mechanical watch. The advantage is that it does not need to be artificially wound up. It is rare now.
- Q:i can't find a website that gives you a list of some machines that are used in textiles in indusry. If you know anything at all, please help me, its driving me crazy.Thanks x x
- You will not find a single website. The info is just not stored that way. Your best bet is to go to a buyers guide (references) and visit the websites of the companies.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
GTJZ0608A/GTJZ0808A Narrow
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords