Full Automatic Paper Packing Bag Making Machine
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 0.2 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Our paper bag production line consists of paper tube forming machine(Tuber) and bottom pasting machine(Bottomer). The products-Valve bags are used for a vast number of applications, primarily in the building materials and food industries, to filling goods such as:cement,chemical material, feeds, fertilizers,tea,rice etc.
Valve paper Bags:
Bags can be made of 2~4 layers kraft paper or paper with one layer of PE/PP film.2~4 colors printing available in Tuber line.
The bags opening or valve in one corner through which the sack is filled. The valve is made with an inner flap which functions as a self-closing check valve after filling. It is available with a plain valve or with an extended inner sleeve of paper or film.
Machine Technical Parameters:
Running Speed | 80~130 bags/min |
Bag length | 520~880mm |
Bag width | 420~600 mm |
Bottom width | 90~130mm |
Bottom open width | 200~380mm |
Distance between bottom centers | 420~780mm |
Valve sheet length | 100~250mm |
Valve sheet width | 120~170mm |
Main drive motor | 33kw |
Total weight | 22.7T |
Size of whole set | 21.3m×2.3.m×1.8m ( L×W×H) |
Product show:
TUBER
BOTTOMER
After-sale service
1.Provide training during and after the commissioning at the buyer site.
2.One year warranty period from the acceptance at the buyer site.
3.Provide life long technical services and effective solutions.
- Q:How are plastic products formed?
- 5 、 blow molding, blow molding, used in thermoplastics. This is the molten plastic in the mold, under the compressed air pressure, the plastic blow up, close to the mold surface. It is produced by punching and demoulding. It also produces many kinds of hollow packing containers, and also produces films, sheets and so on6. Heating, molding, heating and molding thermoplastic plastics. This is the plastic sheet heating into an elastic state, and then put pressure on the mold attached to the mold. Production of dishware, disc type products.7, foaming molding, foaming molding, the plastic will be added foaming agent, so that foaming, then foam into the mold, curing molding for products. The utility model is used for making cushioning packages for precise instruments and meters.8, molding molding for thermosetting plastics. This is a powder, flake or granular thermosetting resins and additives, placed directly in the mold cavity, the mold closing, heating, pressurizing, plastic and liquefaction, chemical reaction and curing, cooling after the products. Multiple production of sheet and electrical appliances, mechanical parts9, casting molding casting molding for jade. The thermosetting plastic molding powder is placed in the material barrel heating to heat plasticizing, pressed into the mold, and the product complete solidification under pressure. Complex products production needs to block metal objects.10, casting molding for solid thermal plastic. It will plasticized thermosetting plastic injection mould, curing under normal pressure, cooling and demoulding to obtain the products. The production of electronic, electrical and metal insert element.
- Q:RT... What are the forming methods of plastic forming dies? Which expert answers, thank you very much...
- 1, plastic injection mold: it is thermoplastic plastic products the most universal of a mold used in the production and processing equipment for plastic injection molding is the corresponding processing equipment for plastic injection mold is the corresponding plastic injection molding machine, plastic injection machine in the first floor heating cylinder heated melting, and then in the injection machine screw or plunger driven by the gating system of injection machine and mold nozzle into the mold cavity plastic molding cooling sclerosis strippingget products. The structure is usually composed of molding parts, gating system, guiding parts, pushing out mechanism, temperature regulating system, exhaust system and supporting parts. The material is usually made of plastic mould steel, and the common materials are carbon structural steel, carbon tool steel, alloy tool steel, high speed steel and so on. Injection molding processing usually apply only to thermal plastic products production, with production of injection molding of plastic products is very wide, from the daily necessities of life to all kinds of complicated machinery, electrical appliances, transport and other parts are used injection molding die, it is a kind of processing method is most widely used in the production of plastic products.
- Q:How does the pulp solidify? What additives do you need? Curing agents? Or what binders are needed? Will the curing process require high temperature or what?
- The industry with alkali as catalyst, the reaction temperature of about 95, the molar ratio of formaldehyde to urea as 1.2.0, to ensure that the resin can be cured. The first step of the reaction and generate a dimethylol urea, then hydroxymethyl amino and soluble resin by further condensation, if by acid catalysis, easily lead to storage products need to gel. In the neutral conditions under the linear urea formaldehyde resin with ammonium chloride as curing agent can be cured at room temperature. The molding powder at 130 to 160 DEG C heat curing accelerators such as zinc sulfate, trimethyl phosphate, two oxalic acid ethyl ester can accelerate the curing process. The urea formaldehyde resin is mainly used in the manufacture of molded plastic manufacturing, daily life products and electrical components also can be used as adhesive, paper sheet and fabric size, veneer, decorative board and so on. Because of its light color and easy coloring, products often colorful and magnificent.
- Q:How long is the distance between the molding machine and the roller in the vertical automatic packing machine?
- The width of the seal is also around 1CM. Because these are slowly adjusted, and if you think the packaging is not good, you can consider adjusting it.
- Q:What are the processes required for imported food packaging equipment?
- Two, if it is an old machine, you need to transfer to Hongkong for inspection! Also called for a pre check, inspection and Quarantine of entry of goods used in advance! After completing the inspection, the follow-up procedure is the same as the new one!
- Q:Foam box production equipment, where is the production of seafood boxes, such as foam box machine?
- (but the leadership of the company are basically old industry employees, so it can be said that the bridge industry is Great Wall Co mold center's predecessor) when just beginning to go to a month of military training, this is the the Great Wall tradition, basically can not be changed. Very tired drop! Just go, must be the next workshop, should be to stamping, the equipment is relatively old, is still very backward, can not be compared with the manufacture of three, let alone the new factory in Tianjin.
- Q:Vacuum plastic forming process is a kind of thermoforming processing method
- The vacuum forming molding method is to make the sheet tensile deformation by the vacuum. The vacuum force easy to realize and grasp and control, so a simple vacuum molding is the earliest, a hot forming method is currently the most widely used.
- Q:Would you like to ask what is the difference between a cold stamping foil and a plain foil wrapper?
- 4., with metallic luster, light shielding, light reflection ability, luminous rate of 95%5., not easy to corrosion, barrier good, moisture-proof, waterproof, airtight, and has fragrant incense6. high temperature and low temperature stable shape, temperature [1] expansion in -73~371 ~ C deformation
- Q:Order a thermal packaging machine to the manufacturer. What information does half of the material need to provide to the packaging machine manufacturer?
- You need to pack the material, preferably the weight of the material, and if it is powder, how much moisture, good fluidity, also need to provide the size of packing bags, my name
- Q:Blow molding process conditions The purpose of the adjustment of technological conditions is that,
- Use the established computer model to simulate the status of blow molding die, blanking billet and clamp plate;Enter the parameters affecting the wall thickness distribution of parison at each stage;The simulation results are analyzed, and computer simulation shows that the wall thickness is not enough, and which parts are super thick;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Full Automatic Paper Packing Bag Making Machine
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 0.2 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords