FRP Lighting Pole D50

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
100Meters m.t.
Supply Capability:
100000Meters m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specifications of FRP Lighting Pole D50

1) FRP ligthing fiberglass lighting GRP lighting

2) Diameter:   63mm

3) Color:  red, black, white, yellow, blue, green, white, gray

4) Length:  from 300mm to 7000mm

5) Customer size, color and length are available.

6) High Strength, Corrosion resistance, Chemical resistance, Flexibility, Aging resistance

 

General specification of FRP Lighting Pole D50

Material : FRP(Fiberglass Reinforced Plastics)

Shape : Cylindrical with a slope of 1.8% or 18mm/M

Height: From 2m to 12m

Type : Straight pole, single arm, double arm

Gross Weight : From 10kgs to 150kgs base on pole of weight

Specification: refer  ANSI C136.20-1990, BS EN40, etc

Max Capacity:1000Pcs/Month

 

Application of FRP Lighting Pole D50

 Especially suitable to be used under extreme weather condition including high humidity coastal area, desert, oil field, high altitude and industrial area with acid and alkali condition . NO MOQ, But advice full container, wwe can count the Q’ty/container based on Client request pole height

Withstand wind s:peed60m/sec (equivalent to Beaufort's Wind Scale 17).

Characteristic: Anti-corrosion, rust free, Anti UV, Non-conductive and excellent insulation

Price validity:Offer valid in a month

Lead time:around 15-60 days

We can supply all kinds of colors.

 

Packaging & Delivery of FRP Lighting Pole D50

Packaging Detail:Bubble wrap

Delivery Detail:15-60days

 FRP Lighting Pole D50

 

  FRP Lighting Pole D50

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How are fiber glass steel poles made?
Among them, the use of winding molding manufacturers accounted for 80%, centrifugal molding manufacturers accounted for 15%, hand molding manufacturers accounted for 5%.
Q:There is a high voltage line above the street lamp. In this case, should the lighting of the street lamp be grounded with each pole? If necessary, how many sets of grounding electrodes should be set?
The high-pressure line is very easy to lead the thunder, each lampposts must do ground handling, power controller to do lightning protection in accordance with the corresponding grounding, how much to see the root soil resistivity field, to measure ground resistance meter.
Q:The telescopic pole do simple iodine tungsten lamp, the best
FRP pole; advantages and disadvantagesThe advantages of FRP pole: 1. light weight, easy installation; 2., plug-in installation.The disadvantages of FRP pole: 1., short service life; 2., no recycling value, processing is very difficult and expensive; 3. UV damage to the rod is very serious; 4., maintenance costs are too high; 5., it is easy to damage by external instruments.
Q:What are the proposals for the rationalization of street lighting maintenance?
Wipe the bulb,The resin is filled with voids between fibers, and the fibers are bonded together to make it a whole. Therefore, the effect of the anti-seepage is mainly borne by the resin. In order to form a compact glass fiber reinforced plastic lining, this paper uses the same resin with the simplified lining as the impervious layer at the joint, and the reinforcing layer adopts the same resin as the winding layer of the tank. Some proper toughening agents and solvents were added into epoxy resin to reduce the viscosity and improve the toughness of frp. In addition, the head and the tank should be cleaned before jointing, joints, including socket, socket and coated glass steel, dry grinding and rough. Before scraping, daub and coating, you should swab the work surface with cotton wool and acetone. On the one hand, it is to remove the grease and paraffin on the inner surface of the glass fiber reinforced plastic lining, on the other hand, it can activate the surface of the glass fiber reinforced plastic, so as to improve the bonding strength. When grinding, be careful not to miss. The quality of the surface treatment is related to the bonding effect between the glass fiber reinforced plastic layer and the tank body. Poor handling often results in cracking, resulting in leakage, so be sure to study the process here
Q:What materials does the supervisor regulate for outdoor street lamp cable sleeves?
Supervision standard is not design specification, nor construction specification, it only stipulates supervision and management behavior. For example, the materials, specifications and models must be in accordance with the requirements of the drawings. What design is, what is in line.
Q:6 meters Road pole installation should pay attention to what?
More than 1.5 meters high, you must use seat belts, or take other reliable safety measures.
Q:What is the material of the street lamp shell?
Street lamps, lamps that provide lighting for the road, generally refer to lamps within the range of road lighting. A summer Zhixu "fragments of memories": "Pedestrian Street has been scarce and dim."
Q:Now the lamp poles of the street lights are all metal. Can we install a small leakage protector for each lamp post?
Through the ground to protect the head from the ground; because the street is too high, ordinary people can not reach the maintenance and change the light bulb is a professional operation only in the blackout, so there is no need to install leakage protection.
Q:How many kinds of aluminum alloy lamp posts are there? Customers should be about 8 meters or so
In order to ensure the strength, more than 10 meters of the lamp pole should do heat treatment, so that the strength of aluminum alloy lamp pole to T6.
Q:Is there a standard for the upper and lower caliber of the 8 meter street lamp post?
Depending on how many poles are carrying, only the road lamp holder can be thinner, and the solar panels are thicker. Besides, the thickness of the arm is very large
We were established in 1994 with registered capital of 17.576 million RMB. The company specializes in production and sales of glass fiber yarn, fabrics and final products, FRP products. It is the largest, most powerful and most advanced textile manufacturing enterprise in fiberglass products also the largest supplier of fiberglass discs for reinforcing the grinding wheel. In 2007, the company successfully listed in Shenzhen Stock Exchange.

1. Manufacturer Overview

Location Shanghai, China
Year Established 1994
Annual Output Value Above US$ 3,000,000
Main Markets Mid East; Eastern Europe; North America
Company Certifications ISO 9001:2000

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port Shanghai
Export Percentage 41% - 50%
No.of Employees in Trade Department 21-50 People
Language Spoken: Chinese
b)Factory Information  
Factory Size: Above 100,000 square meters
No. of Production Lines Above 5
Contract Manufacturing OEM Service Offered; Design Service Offered
Product Price Range Average