FRP Lighting Pole D25
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100Meters m.t.
- Supply Capability:
- 100000Meters m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of FRP Lighting Pole D25
1) FRP ligthing fiberglass lighting GRP lighting
2) Diameter: 28mm
3) Color: red, black, white, yellow, blue, green, white, gray
4) Length: from 300mm to 7000mm
5) Customer size, color and length are available.
6) High Strength, Corrosion resistance, Chemical resistance, Flexibility, Aging resistance
Introduction of FRP Lighting Pole D25
|
Material |
FRP(Fiberglass Reinforced Plastics) |
|
Shape |
Cylindrical with a slope of 1.8% or 18mm/M |
|
Height |
From 2m to 12m |
|
Type |
Straight pole, single arm, double arm |
|
Gross Weight |
From 10kgs to 150kgs base on pole of weight |
|
Specification refer |
ANSI C136.20-1990, BS EN40, etc |
|
Max Capacity |
1000Pcs/Month |
|
Application |
Especially suitable to be used under extreme weather condition including high humidity coastal area, desert, oil field, high altitude and industrial area with acid and alkali condition |
|
MOQ |
NO MOQ, But advice full container, wwe can count the Q’ty/container based on Client request pole height |
|
Withstand wind speed |
60m/sec (equivalent to Beaufort's Wind Scale 17). |
|
Characteristic |
Anti-corrosion, rust free, Anti UV, Non-conductive and excellent insulation |
|
Price validity |
Offer valid in a month |
|
Lead time |
around 15-60 days |
|
We can supply all kinds of colors. | |
Packaging & Delivery of FRP Lighting Pole D25
| Packaging Detail: | Bubble wrap |
| Delivery Detail: | 15-60days |
- Q:What is the material of the street lamp shell?
- Street lamps, lamps that provide lighting for the road, generally refer to lamps within the range of road lighting. A summer Zhixu "fragments of memories": "Pedestrian Street has been scarce and dim."
- Q:How are fiber glass steel poles made?
- Among them, the use of winding molding manufacturers accounted for 80%, centrifugal molding manufacturers accounted for 15%, hand molding manufacturers accounted for 5%.
- Q:The telescopic pole do simple iodine tungsten lamp, the best
- The iron pole has the advantages of high strength, weakness: 1. easy to rust corrosion; 2. is three times heavier than aluminum, transportation and installation cost is high; 3. recovery of limited value; 4. can not be used to insert the installation mode; 5. surface treatment monotone.
- Q:Now the lamp poles of the street lights are all metal. Can we install a small leakage protector for each lamp post?
- There is no need to install the electric leakage protector, the leakage protector mainly protects the personal safety, and the lamp pole of the street lamp is metal
- Q:How many kinds of aluminum alloy lamp posts are there? Customers should be about 8 meters or so
- In order to ensure the strength, more than 10 meters of the lamp pole should do heat treatment, so that the strength of aluminum alloy lamp pole to T6.
- Q:Is there a standard for the upper and lower caliber of the 8 meter street lamp post?
- 8 meters of street lamp poles, the upper and lower caliber depends on the number of poles carrying, only the road lamp holder can be thinner, there are solar panels, etc., to be thicker, and in addition to arm thickness is also very large.
- Q:White glass fibre reinforced plastic street lamp pole
- Specific specificationsThe overall height of the lamp post is N meters, including the upper caliber mm, the lower caliber mm, the bottom of the lamp pole and the flange, and the mounting hole of the flange is mm, and then the screws are fixed on the foundation cage. (usually according to the height of the lamp post, both have fixed values)
- Q:There is a high voltage line above the street lamp. In this case, should the lighting of the street lamp be grounded with each pole? If necessary, how many sets of grounding electrodes should be set?
- In this case, the use of FRP road lamp pole is more appropriate.
- Q:6 meters Road pole installation should pay attention to what?
- Such as work on a grid platform, boards should be laid in order to prevent the tools and equipment from falling.
- Q:What are the proposals for the rationalization of street lighting maintenance?
- Wipe the bulb,The resin is filled with voids between fibers, and the fibers are bonded together to make it a whole. Therefore, the effect of the anti-seepage is mainly borne by the resin. In order to form a compact glass fiber reinforced plastic lining, this paper uses the same resin with the simplified lining as the impervious layer at the joint, and the reinforcing layer adopts the same resin as the winding layer of the tank. Some proper toughening agents and solvents were added into epoxy resin to reduce the viscosity and improve the toughness of frp. In addition, the head and the tank should be cleaned before jointing, joints, including socket, socket and coated glass steel, dry grinding and rough. Before scraping, daub and coating, you should swab the work surface with cotton wool and acetone. On the one hand, it is to remove the grease and paraffin on the inner surface of the glass fiber reinforced plastic lining, on the other hand, it can activate the surface of the glass fiber reinforced plastic, so as to improve the bonding strength. When grinding, be careful not to miss. The quality of the surface treatment is related to the bonding effect between the glass fiber reinforced plastic layer and the tank body. Poor handling often results in cracking, resulting in leakage, so be sure to study the process here
1. Manufacturer Overview |
|
|---|---|
| Location | Shanghai, China |
| Year Established | 1994 |
| Annual Output Value | Above US$ 3,000，000 |
| Main Markets | Mid East; Eastern Europe; North America |
| Company Certifications | ISO 9001:2000 |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Shanghai |
| Export Percentage | 41% - 50% |
| No.of Employees in Trade Department | 21-50 People |
| Language Spoken: | Chinese |
| b)Factory Information | |
| Factory Size: | Above 100,000 square meters |
| No. of Production Lines | Above 5 |
| Contract Manufacturing | OEM Service Offered; Design Service Offered |
| Product Price Range | Average |
Send your message to us
FRP Lighting Pole D25
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100Meters m.t.
- Supply Capability:
- 100000Meters m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
