Specification of FRP Lighting Pole D40
1) FRP ligthing fiberglass lighting GRP lighting
2) Diameter: 38mm
3) Color: red, black, white, yellow, blue, green, white, gray
4) Length: from 300mm to 7000mm
5) Customer size, color and length are available.
6) High Strength, Corrosion resistance, Chemical resistance, Flexibility, Aging resistance
Introduction of FRP Lighting pole D40
Using unsaturable polyester resin as its basic material and unidirectional fiberglass woven fabric as its skeleton, the FRP pole is taken shape by centrifugal process, it supplies properties such as: light weight, high strength, corrosion resistance, low maintenance, and beautiful appearance. It could be used as luminary pole, utility pole, flag pole and other applications and have distinctive advantages compared with the traditional material ones, such as steel pole, aluminum pole, concrete pole and wood pole.
Packaging & Delivery of FRP Lighting pole D40
Packaging Detail: plastic bag or wooden pallet
Delivery Detail: per customer's requirement
- Q:What is the material of the street lamp shell?
- Street lamp shell material, in which the lamp post is national standard, high quality Q235 above steel, lamps and lanterns are generally high pressure cast aluminum.
- Q:What materials does the supervisor regulate for outdoor street lamp cable sleeves?
- Supervision standard is not design specification, nor construction specification, it only stipulates supervision and management behavior. For example, the materials, specifications and models must be in accordance with the requirements of the drawings. What design is, what is in line.
- Q:6 meters Road pole installation should pay attention to what?
- In carrying out work at a height, other persons are not allowed to walk or stay below the working place, unless the persons concerned are located. Enclosure or other protective devices shall be installed below the working place to prevent the wounding.
- Q:What material does the street lamp cover have?
- Many materials, it is best to use double deck, bearing cap with ductile iron, resistant to rolling, sub cover with glass fiber reinforced plastic, waterproof, anti leakage, safe use of Xin Niu covers
- Q:The telescopic pole do simple iodine tungsten lamp, the best
- The iron pole has the advantages of high strength, weakness: 1. easy to rust corrosion; 2. is three times heavier than aluminum, transportation and installation cost is high; 3. recovery of limited value; 4. can not be used to insert the installation mode; 5. surface treatment monotone.
- Q:Now the lamp poles of the street lights are all metal. Can we install a small leakage protector for each lamp post?
- Through the ground to protect the head from the ground; because the street is too high, ordinary people can not reach the maintenance and change the light bulb is a professional operation only in the blackout, so there is no need to install leakage protection.
- Q:What are the proposals for the rationalization of street lighting maintenance?
- Wipe the bulb,The resin is filled with voids between fibers, and the fibers are bonded together to make it a whole. Therefore, the effect of the anti-seepage is mainly borne by the resin. In order to form a compact glass fiber reinforced plastic lining, this paper uses the same resin with the simplified lining as the impervious layer at the joint, and the reinforcing layer adopts the same resin as the winding layer of the tank. Some proper toughening agents and solvents were added into epoxy resin to reduce the viscosity and improve the toughness of frp. In addition, the head and the tank should be cleaned before jointing, joints, including socket, socket and coated glass steel, dry grinding and rough. Before scraping, daub and coating, you should swab the work surface with cotton wool and acetone. On the one hand, it is to remove the grease and paraffin on the inner surface of the glass fiber reinforced plastic lining, on the other hand, it can activate the surface of the glass fiber reinforced plastic, so as to improve the bonding strength. When grinding, be careful not to miss. The quality of the surface treatment is related to the bonding effect between the glass fiber reinforced plastic layer and the tank body. Poor handling often results in cracking, resulting in leakage, so be sure to study the process here
- Q:FRP pole equipment manufacturers
- Hengshui Meng Sheng Industry FRP equipment Co., Ltd. is located in Hengshui city of rubber industrial park, is a professional engaged in computer control of glass steel pipe / tank complete sets of machinery and equipment R & D and manufacturing of high-tech enterprises.
- Q:8 meter pole foundation, and now the foundation can only be dug to 0.7 meters, how can we stand up the pole, and begged the master to help?
- It is recommended to dig deeper 300, plain concrete 1000X1000 pouring
- Q:Is there a standard for the upper and lower caliber of the 8 meter street lamp post?
- Depending on how many poles are carrying, only the road lamp holder can be thinner, and the solar panels are thicker. Besides, the thickness of the arm is very large
We were established in 1994 with registered capital of 17.576 million RMB. The company specializes in production and sales of glass fiber yarn, fabrics and final products, FRP products. It is the largest, most powerful and most advanced textile manufacturing enterprise in fiberglass products also the largest supplier of fiberglass discs for reinforcing the grinding wheel. In 2007, the company successfully listed in Shenzhen Stock Exchange.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 3,000，000
||Mid East; Eastern Europe; North America
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||Above 100,000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range