Q:I am a manufacturing engineering technology and a mechanical engineering double major and am wanting to know how I can go about designing and building automobiles, ships, or heavy construction machinery. What kinds of companies should I be looking at? and what qualifications should I be shooting for?

No individual can design and build automobiles, ships, or construction machinery. You can be a specialised member of a team to design parts of automobiles, ships, or construction machinery.

Q:My daughter has an egg allergy and most pastas (although not made with egg) indicate that the contents were processed on the same machinery as other pastas with egg.

but okorder / You can get an inexpensive pasta maker or press, a rack to dry it, and not have to worry. Frankly, with food allergies I don't dare go for anything pre-made, because the danger is that they will start to crave it and get careless. I make it, and take food with me so I am never stuck and tempted to take a risk just because I am hungry. We had a student in the college who nearly died eating a piece of cake he thought would be safe. So you can never be too careful.

Q:There are two cabinet saws I like ones a shop fox 3hp cabinet saw with 50 inch extension 230v so I would have to wire it the other a powermatic pm1000 that's a 1 3/4hp cabinet saw that's runs on 115v so I don't have to wire which also has a 50 inch extension the shop fox is 1800 dollars the powermatic pm1000 2100 dollars so which is the one I should buy 10 points best and most helpful answer I'm also only a hobbyist not a professional

if you are not planning to use the table saw for making and selling === as a hobbyist you do not need to spend 2K or 3K thousand dollars for a good table saw === you can buy a good table saw and inset it to a plywood extension table and actually have more flat surface than the high dollar saws that you have mentioned in your question ...... getting the right cut and a precise cut on most any table saw is the practice of measuring from rip-fence to blade cutting at the blade ---- measure the table grooves -- the blade cut to the rip fence -- several times == that is all the same stuff that you will have to do even with a $3,000.00 cabinet making table saw ..... It is not what you asked but it is a place to start shopping -- SEARS has a good selection of table saws and varied brands -- if this is your 1st table saw it is better to buy the two or three hundred model and learn what you want before the 2/3 K expense. Go to Sears and shop == remember the wood pusher stick to save fingers == and see what is available ...

Q:BOARD EXAM QUESTIONS

# Read the book by R.S.Khurmi or by dr. A.K.Jain.

Q:What website shows the final auction sold price of used heavy machinery?

Use eBay, but use the 'completed listings' search option. Thanks

Q:Use of construction machinery

The pump is pumping system will be installed in the car, and can be received by a development boom as the transmission channel, will be transported to the vehicle concrete buildings. Such as towers, pump truck can take mixer (concrete truck mixer) which mixed concrete is delivered directly to the 56 storey building. Of course, or higher. Can also be transported to the lower level, such as the foundation.

Q:Thanks for your help.

Not necessarily. Machinery and property are capital assets, and selling them reduces the overall profit (assets - liabilities) If there is any profit (according to book values), it isn't strictly speaking earnings.

Q:What are the differences between diesel engines used in construction machinery and diesel engines for automobiles?

The basic structure is the same. But for the requirements of the diesel engine is not the same, such as: the car is used to determine the maximum power in 15 minutes, while the construction machinery is the maximum power at 1 or 12 hours. That is to say, with the operation of automobile engine allows the maximum power of 15 minutes of continuous; and construction machinery allowed the maximum power of 1 hours of continuous operation. The calibration of automotive engine power is high, such as: YC6105Q, the car is 105KW/2800 rpm. As a mechanical engineering at YC6105G, 1 hours power at 81KW/2300 rpm.

Q:Without machinery?

you know the drill. sit ups. crunches. stuff like that.

Q:Can anyone supply me with information on hydraulics and hydraulic machinery, it is for an engineering project, which involves lifting a heavy item and i would like to get information on hydraulics which can be used in this situation.

Open okorder . They are producing hydraulic cylinders in various sizes and capacities, Pumps as well as other hydraulic tools such torque wrenches, punches, crimping tools etc. They have a complete catalog in their website too. And they have their distributors in various countries too.