Specification of Aluminum Coated Fiberglass Fabric:
Different forms of fiberglass as backing brings us a stronger laminates with best chemical resistance, better heat resistance; Meanwhile absolute environmental.
Structure of Aluminum Coated Fiberglass Fabric:
Foil + Adhesive + Fiberglass Fabric + Adhesive + Foil + Pressure sensitive adhesive + Silicon Coated Paper
Roll Width: 1M~1.35M. Or as order
Roll Length: As Order
According to specific requirements
Application of Aluminum Coated Fiberglass Fabric:
Mainlyusedforreflectibleshields,exhaustinsulationprotective clothing, fire wall barriers and so on.
Technical data of Aluminum Coated Fiberglass Fabric:
AL3732, 0.43mm thickness, coated with aluminum , twill, 430g/m2
We have two kinds: without adhesive and adhesive.
- Q:What is the difference between alkali resistant fiberglass mesh cloth and high alkali glass fiber mesh cloth?
- Alkali resistance refers to the performance of special glass fiber, while high alkali refers to the composition of glass fiber.Are two completely different concepts.
- Q:Can fiberglass mesh waste be recycled? What can you do if you can?
- Mesh cloth, such as discarded cloth, is not corrosive and may not corrode for hundreds of years, causing serious pollution to the land;
- Q:Method for sampling alkali proof glass fiber mesh cloth
- The amount of cement, sand barrels after weighing pour the mixture iron grey trough, mix according to the mixture ratio and binder is added for mixing, stirring to be uniform, to avoid segregation, a gruel. Water can be added according to workability.
- Q:What are the fiberglass mesh fabric manufacturers?
- Offiberglass self-adhesive caulkingGlass fiber self-adhesive tapes are made from high quality glass fiber fabric coated with acrylic copolymer, which is stable and difficult to oxygen because of its chemical propertiesSo, we developed production offiberglass self-adhesive caulking is not only superior to other similar products There is nothing comparable to this.
- Q:Self-adhesive fiberglass mesh
- EPS mesh made of alkali resistant glass fiber fabric, it uses alkali free glass fiber yarn by weaving leno weave structure and special organization, after the anti alkali, heat setting treatment such as reinforcing agent, finally by not dry glue coating baked. A EPS mesh fabric with alkali resistance, softness, adhesion and tensile resistance is formed.
- Q:Glass fiber mesh cloth, pure gold pot with what glue out, finished products can be detected, as well as the proportion of glue is how much?
- This product and people engaged in the industry of external wall insulation pot imitation gold mesh fabric is very familiar, but exactly how this product is really not much here to explain imitation gold mesh pot is to be defined.
- Q:How do you paste the mesh cloth on the back of the stone?
- At the bottom of the stone board, besmear the resin glue, and then adhere to the fiber mesh cloth, forming tensile waterproof layer, but must not forget to brush in the side.
- Q:Glass fiber mesh cloth bent do to straighten it?
- Of course not, because of hard and soft and orientation relationship, different product positioning different soft and hard to do it, and a product is related to raw materials, and then coated on the surface of the adhesive is below, introduced from two aspects respectively.
- Q:Glass fiber mesh fabric quality, hard and soft for wall, which is better?
- I feel that way. While using mesh cloth, you also need to look at the quality of the mesh fabric. In general, the outer wall of the grid cloth with 1 quick money, a square meter or so will be good
- Q:Glass fiber mesh fabric stereotypes poor, general use of glue is acrylic emulsion, please add what accessories, you can finalize a better shape
- To increase the penetration of some surface active agent, increase the permeability of the emulsion, adding some phenolic thermosetting resin, melamine formaldehyde and improve sizing effect, to prevent the resurgence of soft, adding cationic film plasticized thermosetting resin while reducing fiber absorption and softening fiber
We supply the following categories of products: Aluminized Fiberglass Cloth, Phenolic Foam Air Duct Panel, Polystyrene(XPS) Foam Insulation Panel, Polyurethane(PU) Sandwich Panel, Phenolic Foam Panel with Colored Steel, Aluminum Foil Tape and Fiberglass cloth, which meets Chinese and international standard -- bringing the benefits of thermal insulation, flame-resistant, fire safety, moisture resistance, anticorrosion, and acoustic insulation.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||31% - 40%
|No.of Employees in Trade Department
||5,000-10,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range