Q:There's a washload problem which i cannot figure out....A washing machine load in the spin cycle, (much like a centrifuge used to separate fluids), can be modeled as a cylinder which has zero density toward the center, and starting from some inner radius where the clothes (or fluids) begin, increases in density as you move radially outward. If such a washing machine has density of clothes (in SI units) of = 16r + 6, a height of 0.60 m, and only has clothes present from inner radius 0.31 m out to 0.55 m from the center,a) what is the moment of inertia of the wash-load? b) If the metal wash basin in which the clothes rotate has a moment of inertia of 4.00 kg*m2, what is the power of the motor that drives it and the clothes from rest up to 5.00 revolutions per second, in 23.0 seconds?

b) If the metal wash basin in which the clothes rotate has a moment of inertia of 4.00 kg*m2, what is the power of the motor that drives it and the clothes from rest up to 5.00 revolutions per second, in 23.0 seconds. This will be work done by torque. work done by torque = torque x radians torque = inertia x alpha (rad/s^2) inertia = 4 kg.m^2 alpha = (5 x (2pi)) / 23 = 1.36591 rad/s^2 T = 4 x 1.36591 = 5.46364 Nm 5 x 2pi = 31.416 rad/s (0 + 31.416)/2 x 23 = 361.283 radians 5.46364 x 361.283 = 1973.92 J work done / time = power 1973.92/23 = 85.82 Watts

Q:How do I keep the faucet on the washbasin?

Good looking is that a faucet, the faucet is a single hole cold, in the faucet with a bakelite or plastic plastic nuts, as long as the gasket put and then fastened, if the first hole Hot and cold water pipe according to the red (hot) blue (cold) installed and then put the bolt and then fixed with copper nuts on it.

Q:How to fix the ceramic washbasin on marble

White porcelain can be fixed, put up with a glue gun on a circle like

Q:Washing basin on the edge of glass glue black how to do

It is caused by moldy, it is recommended to remove the buy 25 to 40 yuan of glass glue grinding, the basic cure.

Q:I've been using this combination of products to do a quick wash of my bathroom sink before shaving, because I don't want heavy duty cleaning product chemical residue getting in the water after I fill the sink I fill the sink with hot water to use for shaving. The mixture is;antibacterial soap (two squirts) and hand sanitizer (1 full squirt) on a sponge that is used for only for this purpose. I wipe the mixture over everything (sink, handles faucet, outer basin, etc), leave it for 5 mins and then wipe clean with hot water and a sponge (the same sponge rinsed free of soap)Is this sufficiently sterilizing my bathroom sink?(Note: the sink being addressed is my own private bathroom sink - common area bathroom is sterilized with ajax/comet cleaner and bleach followed by being sprayed down with disinfectant after primary rinse and wipe down)

That is way too much cleaning. You may be OCD. Just clean your basin once a week with a little ajax or whatever you like and then rinse it out and your done. No need of daily sanitizing.

Q:I went to wash some dirty rags and about 10 minutes later the washing machine didn't sound right so I went to check and i took the wet rags out. There was water where the clothes are supposed to be Now I can't get the water out.

I okorder / they have a step by step on how to find out

Q:My home washbasin on the table how are long black spots ah, I can not wash water, how to do?

You can be a kind of clean things called what I forgot the name, but you can go to a large building materials supermarket to ask, your attendants explain the situation, they will recommend to you, I used to learn is a three-in-one packaging , There is a box is a special clean marble countertop kitchen table table, such as the table with no sauce on the sauce can not afford, there is a box of clean rust, for example, the ground is tiles, the above is not careful there is a iron thing on the long time Do not remove the ground there must be rusted rub, there is a box of clean glue as above, which is called triple packaging, the price should be around 150 bar is not a box of the price Oh, three boxes together The price of 150 or so, then I was 130 yuan, and now do not know how much

Q:Wall wash basin wash basin from the ground to high

Wall wash basin washbasin 50CM or so away

Q:Can you wash your face?

Copper basin wash your face is not good. Why do you wash the basin with water? Reason: long time with copper wash basin, because a long time exposure to hot water and oxygen, resulting in copper and oxygen reaction to produce copper oxide, copper oxide is black, attached to the surface of the basin, so the basin black. Chemical Reaction Equation: 2Cu + O2 = Heating => 2CuO Treatment: CuO + 2H + = Cu2 + + H2O, indicating that CuO can react with H + (method: black washbasin surface coated with acetic acid, and then wipe with a scouring pad, and finally rinse with water).

Q:Why is a wash basin's height limited to 3 feet when most people are 5 feet tall and have to bend to use it?

It's not really the ADA, bathroom sinks have always been TOO LOW! I am 5'9 and once lived in a very old apartment (built in 1902) and the bathroom sink was somewhere between my knee and hips. I had to bend way far over to use it. That sink contributed to my lower back problems. In very old homes the low height of the bathroom sink was due to the fact Americans were much shorter than today. Go to any antique store and look at the 100+ year old kitchen queens. Look at how low the counter top is compared to your kitchen counter at home. You CAN have your house built with higher sinks. When we remodel our house we're having our bathroom sinks built to the same height as the kitchen counters! There is no excessive bending in the kitchen, so why should I break my back in the bathroom. You can even have your kitchen designed so the dishwasher sits higher so you don't have to bend way over to load and unload it. Your screen name and the nature of your other questions suggests you are not located in North America or Western Europe. If you are indeed located in the Sub Continent, South Asians have been considerably shorter in stature than people of Western European ancestry. Asians in general -Sub Continent and Oriental have also been growing taller, but the Asian growth spurt has been slower and more recent than the ones experienced by Westerners. Home designers in your part of the world are, I am sure recognizing this fact and new housing units will be built for taller people.